Ball valve 1 inch female male thread, male thread ISO 7/1 R - female thread ISO 7/1 Rp (M-F), Ball brass chrome-plated, Seal ballPTFE, O-ring Viton/NBR, Housing brass nickel-plated for liquid and gaseous media, DVGW Gas Max. Operating pressure 40 bar
Nominal width :DN25 - 1'' inch
Connection :Male female thread
Design :2 ways
Body:Brass
Material ball :Brass, chrome-plated
Ball seal:PTFE
O-Ring:Viton/NBR
Temperature range :Air: -20°C to +60°C Water: 0°C to +60°C Gas: -20°C to +60°C
Internal thread ball valve 1 inch to ISO 228 F-F, Ball brass, hard chrome plated, Sealball PTFE, Sealshaft Viton (FPM/FKM), Body brass, nickel plated for liquid and gaseous media, Max. Operating pressure 40 bar
Nominal width :
DN25 - 1'' inch
Connection :
Female thread
Design :
2 ways
Body:
Brass
Ball seal:
PTFE
Temperature range :
Air: -20°C to +150°C Water: 0°C to +150°C Gas: -20°C to +60°C
Ball valve 1 inch female threadfemale thread acc. to ISO 7/1 Rp (F-F), Ball brass chrome-plated, Seal ballPTFE, O-ring Viton/NBR, Housing brass nickel-plated for liquid and gaseous media, DVGW Gas Max. Operating pressure 40 bar
Gas ball valve 1 inch stainless-steel2-way ball valve for gas with DVGW gas approval according to DIN EN 13774. Full bore, 2-part design, with female threads according to DIN EN 10226-1 (ISO 7/1). The body and ball made of stainless-steel (1.4408), stem made of stainless steel (1.4401). Seals made of PTFE. Temperature range: -20°C to +60°C (depending on pressure), max. pressure: 16 bar. Top flange according to to ISO 5211, suitable for direct actuator mounting. Suitable for ATEX group 2, category 1 (2014-34-EU) with TA Luft certification (DIN EN ISO 15848). Actuation with a hand lever.
Water ball valve 1 inch stainless-steel2-way ball valve for water with DVGW-drinking water approval according to DIN EN 13828 W570-1. Full bore, 2-part design, with female threads according to DIN EN 10226-1 (ISO 7/1). The body and ball made of stainless-steel (1.4408), stem made of stainless steel (1.4401). Seals made of PTFE. Temperature range: 0°C to +90°C (depending on operating pressure), max. pressure: 10 bar. Top flange according to ISO 5211, suitable for direct actuator mounting. With TA-Luft certification (DIN EN ISO 15848). Actuation with a hand lever.
Electric ball valve 1 inch drinking water2-way stainless steel ball valve with DVGW approval for drinking water according to DIN EN 13828 W570-1, operated by an electric actuator 24V - 230V - 240V. Ideal for use in water/drinking water pipelines. The ball valve has a threaded connection (female threads) according to DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (1.4408) and the shaft is made of stainless steel (1.4401). Full bore with PTFE seat. Actuated by an electric multi-voltage actuator with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Gas ball valve 1 inch electric 2-way stainless steel ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas equipment directive GAR EU-2016-426. Ideal for gas pipelines. The valve has a female thread connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (1.4408) and the shaft is made of stainless steel (1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, silicone-free. Actuated by an multi-voltage electric actuator 24V - 230V - 240V, with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Ball valve 1 inch for drinking water DVGW, female thread acc. to ISO 7/1 Rp (F-F), Ball brass chrome-plated, Seal ballPTFE, O-ring Viton/NBR, Body chrome-plated brass, DVGW drinking water approval, Max. Operating pressure 40 bar
3-piece stainless steel ball valve 1 in. DN 25 female thread connection acc. to ISO 228-1 F-F, body & ball stainless steel CF8M (1.4408), gasket TFM 1600, full bore, 3-piece, approval TA-Luft, ATEX, AD2000-A4 with hand lever
Electric quarter turn ball valve 1 inch PN 63 female thread acc. to ISO 7-1(EN 10226-1) F-F, body / ball / shaft stainless steel (SS316)(CF8M), sealing ball PTFE + 15% glass fibre, with electric actuator(J4C S20), running time(90°) 9s ± 10%, multi voltage system 24V - 230V - 240V AC/DC
