Wafer type butterfly valve DN 250 EPDM pneumatic actuator
Design Wafer type butterfly valve DN 250 with spring-return actuator, connection PN10/16/150lbs, body made of ductile cast iron GGG40, disc made of stainless steel (1.4408), seat ring made of EPDM with pneumatic single-acting quarter-turn actuator 90°.
Wafer butterfly valve DN 250 PN10/16 NBR with hand leverWafer type butterfly valve connection PN10/16/150lbs, tight-closing, centric bearing, body made of nodular cast iron GGG40, disc stainless steel (1.4408), seat ring NBR with hand lever grey cast iron (GG)
Wafer butterfly valve DN 250 EPDM with hand lever Wafer type butterfly valve connection PN10/16/150lbs, tight-closing, centric bearing, body made of nodular cast iron GGG40, disc made of stainless steel (1.4408), seat ring made of EPDM with hand lever
Wafer types butterfly valve DN 250 EPDM pneumatic actuatorWafer type butterfly valve DN 250 with pneumatic actuator, butterfly valve connection PN10/16, butterfly valve body made of nodular cast iron GGG40, butterfly valve disc made of stainless steel (1.4408), seat ring made of EPDM with pneumatic double-acting quarter-turn actuator 90 degrees, Max. Operating pressure 8 bar, Designed for 6 bar pilot pressure
Wafer type butterfly valve DN 250 PN10Connection PN10/PN16/ANSI 150, body made of EN-GSJ-500-7 (GGG50) nodular cast iron, disc made of (CF8M) stainless steel, seal made of PTFE, Free shaft actuation
Wafer butterfly valve DN 200 PTFE with EPDM coreWafer butterfly valve connection PN10/16/150lbs, butterfly valve body made of nodular cast iron GGG40, butterfly valve disc made of stainless steel (1.4408), seat ring PTFE with EPDM support ring, operation with gearbox - actuator on request
