Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
wafer PTFE butterfly valve DN 200, connection PN10, body made of EN-GSJ-500-7 (GGG50) nodular cast iron, disc made of (CF8M) stainless steel, seal made of PTFE, free shaft operation
Intermediate flange PTFE lined butterfly valve DN 150, connection PN10, body made of EN-GSJ-500-7 (GGG50) ductile cast iron, disc made of (CF8M) stainless steel, PFA + PTFE lined, seal made of PTFE withdouble acting actuator
Stainless steel butterfly valve DN 200 with hand leverLug butterfly valve connection PN10, butterfly valve body & disc made of stainless steel (1.4408), seat ring made of EPDM, temp. (min. max.) -10°C to +120°C with hand lever
Wafer type butterfly valve DN 200 connection PN10/16, body made of nodular cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of Viton with electric quarter-turn actuator J4C-S300, running time (90°): 58s ± 10%, multivoltage 24V - 230V - 240V AC/DC
