Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
Wafer type butterfly valve DN 250 PN10Connection PN10/PN16/ANSI 150, body made of EN-GSJ-500-7 (GGG50) nodular cast iron, disc made of (CF8M) stainless steel, seal made of PTFE, Free shaft actuation
Intermediate flange PTFE lined butterfly valve DN 250, connection PN10/PN16/ANSI 150, body made of EN-GSJ-500-7 (GGG50) ductile cast iron, disc made of (CF8M) stainless steel, PFA + PTFE lined, seal made of PTFE with double acting pneumatic actuator
Double-eccentric butterfly valve DN 250Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Gas butterfly valve - flanged butterfly valve DN 250 gas connection flange PN10, body made of cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of NBR, DVGW gas approval with pneumatic single-acting quarter-turn actuator
