Flanged ball valve DN 25, connection acc. to DIN PN16/40, face to face EN 558-1 series 14 (F4), ball seal TFM1600(PTFE), stainless steel ball, steel body (1.0619), approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with electric actuator (J4C S20), running time (90°): 9s ± 10%, 24V - 230V - 240V AC/DC
Fergo ball valve type KH155-CS1TLF-DN20 PN40 with EL actuator Flange connection according to DIN PN16/40 Face-to-face: DIN EN 558-1 (basic series 14)/to DIN 3202 F4 Full bore, 2-piece Body: 1.0619 steel (A216 WCB) Ball: 1.4301 stainless steel (A351 CF8) Shaft: AISI 304 Seal ball: TFM 1600 Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 40bar Approval: TA-Luft, Firesafe ATEX Ex II 2 GD c T3 SIL3 IEC 61508:2010 Actuation: Electric rotary actuator type: FG-J4C-S20 Multi-voltage system: 24 - 240V AC/DC, 50/60Hz Running time (90°): 9s ± 10% Housing: Polyamide (PA6) Limit switches: 2x SPST NO 5A 125V AC / 3A 250V AC Manual override Electronic torque limiter Automatic control room heating
Intermediate flange PTFE lined butterfly valve DN 80, connection PN10/PN16/ANSI 150, body made of EN-GSJ-500-7 (GGG50) ductile cast iron, disc made of (CF8M) stainless steel, PFA + PTFE lined, seal made of PTFE with electric actuator
Lug butterfly valve DN 250 EPDM single acting pneumatic actuatorFlanged butterfly valve DN 250 with single acting pneumatic actuator, butterfly valve connection PN10/16, butterfly valve body made of nodular cast iron GGG40, butterfly valve disc made of stainless steel (1.4408), seat ring made of EPDM with pneumatic single-acting quarter-turn actuator 90 degrees, Max. Operating pressure 8 bar, Designed for 6 bar pilot pressure
Lug butterfly valve stainless steel DN 150 with hand leverButterfly valve connection PN10/16, butterfly valve body & disc made of stainless steel (1.4408), seat ring made of EPDM, temp. (min. max.) -10°C to +120°C with hand lever (Al)
Wafer-type gas butterfly valve DN 25connection PN10/16, body made of nodular cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of NBR, approval DVGW Gas with hand lever (Al)
Rubber expansion joint DN 250 for the pipeline, DIN PN16, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Rubber expansion joint DN 150 for the pipeline Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150mm, Bellow EPDM, nylon cord reinforced, Flanges stainless steel, Max. working pressure 16 bar
Rubber expansion joint DN 100 with vacuum support ringDIN PN10/16, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 100 with SS316 - The movement capacity is reduced by approx. 50%.
Knife gate valve DN 50 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 50 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 65 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 80 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 100 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 125 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 150 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 200 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 250 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 300 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 65 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 80 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 100 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 125 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 150 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 200 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 250 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 300 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 50 PN10 Wafer-type unidirectional design, body made of stainless steel CF8M(1.4408), seat ring made of EPDM, gate made of stainless steel SS316L (1.4404), stem made of stainless steel SS303 (1.4305), actuation: handwheel with rising stem
Wafer-type knife gate valve/flat knife gate valve DN 125 PN10, single-seated design, seat ring made of EPDM, body made of grey cast iron (GG25), valve plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305) with pneumatic double-acting actuator
Wafer type knife gate valve/flat knife gate valve DN 300 connection PN10single-seated design, seat ring made of EPDM, body made of cast iron (GG25), gate plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305), quick closing lever steel painted
Flanged knife gate valve DN 80 PN10Design bi-directional, seat ring made of NBR with profile steel core reinforcement, body made of grey cast iron (GG25), gate plate & stem made of stainless steel, handwheel with non-rising stem
