2-way flanged ball valve type KH123W made of stainless steel with DVGW approval for drinking/potable water, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system W). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Nominal width :DN32 - 1 1/4'' inch
Connection :Flange PN10 , Flange PN16
Design :2 ways
Body:Stainless Steel
Material ball :Stainless steel (1.4408)
Ball seal:PTFE
Face to Face length :EN 558-1-Reihe 27
Temperature range :Depending on the operating pressure
Actuation :Pneumatic Actuator
Max. Operating pressure :16 bar
Certificate :DVGW Drinking water , TA Luft
Option:Double Acting , Full passage
Availability:In Stock
Tender
Ball valve KH123W, PN16-DN32 with DA actuator • Flanged ends acc. to PN16 • Face to face acc. to EN 558-1, R27 • Full port • 2- piece body • Sealing system W • Body: 1.4408 • Ball: 1.4408 • Ball seat: PTFE • Stem seal: EPDM/PTFE • Body seal: PTFE • Temperature range: depending on working pressure • Direct mounting actuator ISO 5211 • Max. working pressure: 16 bar • DVGW drinking water approval acc. to DIN EN 1074-2 Operation: Pneumatic actuator DA1-40-AN-F05-C14 • Design: double acting, 90° quater turn • Body: aluminium, hard anodized • Temp. (min./max.): -30°C to +100°C • Max. pressure: 8 bar IMPORTANT! Actuator sizing calculation for 6 bar air supply!
Limit switch box EB300-PP2M02 with mechnical micro switchesFlexible box made of polyamide with polycarbonate cover, Mounting bracket and shaft made of polyamide, Voltage: 12-250 V AC/DC, Operating current: 0,1-10A with protection IP67
Limit switch box EB300-PP2I02 with inductive switchesFlexible box made of polyamide with polycarbonate cover, Mounting bracket and shaft made of polyamid, 2x inductive proximity switches P+F, NBB2-V3-E2 (PNP N.O.), LED Indicator, Max. current: 0-100mA with protection IP67
5/2 way Namur solenoid valve with air springPneumatic solenoid valve 5/2 way G 1/4" with Al anodised frame, inner parts of brass and synthetic material with NBR sealing, Operating pressure of 1.5 to 10 bar with protection class IP65 including solenoid coil and plug
5/2 way Namur solenoid valve with air springPneumatic solenoid valve 5/2 way G 1/4" with Al anodised frame, inner parts of brass and synthetic material with NBR sealing, Operating pressure of 1.5 to 10 bar with protection class IP65 including solenoid coil and plug
Duplex flanged ball valve DN 25 for seawaterConnection acc. to DIN PN16/40, face-to-face length EN 558-1-series 14 (F4), ball seal made of TFM1600(PTFE), body from duplex stainless steel 1.4470 (CD3MN), ball from duplex stainless steel (S32205), approval: TA-Luft, Firesafe, ATEX, AD2000-A4 with hand lever
Disco check valve DN 32 spring loaded, intermediate flange PN6 up to 40 ANSI150/300, Face to face acc. to EN 558-1- series 49, Body, disc made of stainless steel (1.4408 / 1.4581), spring stainless steel (1.4571), seat EPDM, With 4 earthing lugs, Max. Operating pressure 40 bar
Flanged butterfly valve DN 32 for water, connection flanges PN10/16, body made of cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of EPDM, approval: DVGW for drinking water with pneumatic quarter-turn actuator double-acting
Wafer type butterfly valve DN 300 NBR pneumatic actuator Wafer type butterfly valve DN 300 with pneumatic actuator, butterfly valve connection PN10/16/150lbs, butterfly valve body made of ductile iron GGG40, butterfly valve disc made of stainless steel (1.4408), seat ring made of NBR with pneumatic double acting quarter turn actuator 90 degrees, Max. Operating pressure 8 bar, Designed for 6 bar supply pressure
