Flanged ball valve DN 50, connection acc. to DIN PN16/40, face to face EN 558-1 series 1 (F1), ball seal made of TFM1600(PTFE), body made of steel(1.0619), ball made of stainless steel, approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with hand lever
Fergo ball valve KH155-CS1TLF-DN50-F1 Flange connection according to DIN PN16/40 Face-to-face: EN 558-1 (basic series 1)/acc. to DIN 3202 F1 Full bore: 2-piece Body: 1.0619 (A216 WCB) Ball: 1.4301 (A351 CF8) Shaft: AISI 316 Seal ball: TFM 1600 Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 40bar Direct drive design according to ISO 5211 Approval: TA-Luft, Firesafe ATEX Ex II 2 GD c T3 SIL3 IEC 61508:2010 Actuation: Hand lever
Flowserve Durco Plug Valve DN80, Flanged connection acc. to DIN EN 1092-2-PN10/16, Face to face dimension acc. to EN558, series-1, Plug ductile cast iron GGG40.3-PFA coated, body ductile cast iron-PFA lined, with hand lever
Flowserve Durco Plug Valve 1" inch, Flanged connection acc. to ASME B16.5-150lbs, Face to Face dimension acc. to ASME B16.10-short pattern, Plug ductile cast iron GGG40.3-PFA coated, body ductile cast iron-PFA lined, with hand lever
Flowserve Durco sleeveline G4E DN 15, flange connection acc. to DIN EN 1092-1-PN16/40, face to face EN 558-1, series 1 (ISO 5752), plug & body made of stainless steel (1.4408), diaphragm made of PFA, approval TA-Luft with hand lever
Rubber expansion joint DN 125 with vacuum support ringDIN PN10/16, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 125 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 50 stainless steel for the pipeline DIN PN10/16, Face to Face 130mm, EPDM, nylon reinforced, stainless steel flange, Max. working pressure 16 bar
Rubber expansion joint DN 50 for the pipeline, DIN PN10/16, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Rubber expansion joint DN 65 for the pipeline Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Knife gate valve DN 65 PN10Double poppet design, seat ring made of EPDM with profile steel core reinforcement, body made of grey cast iron (GG25), gate plate & stem made of stainless steel, plate guide with integrated scraping effect, packing PTFE-Synt./EPDM/PTFE-Synt, operation handwheel with rising stem
Wafer-type knife gate valve/flat knife gate valve DN 125 PN10, single-seated design, seat ring made of EPDM, body made of grey cast iron (GG25), valve plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305) with pneumatic double-acting actuator
Wafer-type knife gate valve/flat knife gate valve DN 100 PN10single-seated design, seat ring made of metal, body made of grey cast iron (GG25), gate plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305), actuation handwheel with rising stem
Wafer-type gate valve/flat slide valve DN 150 connection PN10, single-seated design, seat ring made of NBR, body made of grey cast iron (GG25), gate valve plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305), quick-closing lever steel painted
