Flanged ball valve DN 100, connection acc. to DIN PN16, face-to-face length EN 558-1-series 14 (F4), ball seal TFM1600(PTFE), ball made of stainless steel, body made of steel (1.0619), approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with hand lever
Nominal width :DN100 - 4'' inch
Connection :Flange PN10 , Flange PN16
Design :2 ways
Body:Steel
Material ball :Stainless steel (1.4301)
Ball seal:TFM 1600 (PTFE)
Face to Face length :EN 558-1 series 14
Temperature range :-29°C to +175°C
Actuation :Hand Lever
Max. Operating pressure :16 bar
Certificate :TA Luft, Fire Safe, AD2000-A4
Option:Full passage
Availability:In Stock
Tender
FERGO ball valve type KH155-CS1TLF-DN100 Flange connection: DIN PN16 Face-to-face : DIN EN 558-1 (basic series 14)/acc. to DIN 3202 F4 Full bore : 2-piece Body: 1.0619 (A216 WCB) Ball : 1.4301 (A351 CF8) Shaft: AISI 304 Seal ball: TFM 1600 Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 16bar Direct drive assembly: ISO 5211 Approval: TA-Luft, Firesafe ATEX: II 2G Ex h IIB T3 Gb / II 2D Ex h IIIC T180°C Db SIL3 IEC 61508:2010 Actuation: Hand lever
Stainless steel sight glass internal thread 1/2 inch acc. to ISO 7-1 (EN 10226-1), F-F, body stainless steel (1.4408)(CF8M), glass soda lime hard glass, gasket PTFE, max. operating pressure 16 bar. Operating pressure 16 bar
Sight glass Flange connection acc. to DIN 2501 PN16, Overall length acc. to EN588-1 Series-1, Housing made of stainless steel (1.4408)(CF8M), Glass made of pressed hard glass, Sealmade of PTFE, Pressure range 10/16 bar
Sight glass flange connection acc. to DIN 2501 PN16, face-to-face length acc. to EN588-1 series-1, body made of stainless steel (1.4408)(CF8M), glass made of tempered glass, gasket made of PTFE, pressure range 10/16 bar
Stainless steel sight glass 2 inch female thread acc. to ISO 7-1 (EN 10226-1), F-F, Housing Stainless steel (1.4408)(CF8M), Glass Soda-lime tempered glass, Seal PTFE, Max. Operating pressure 16 bar
Internally threaded needle valve 1 1/4 inch stainless steelacc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internally threaded needle valve 1/4 inch stainless steelacc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internal thread needle valve 1/2 inch stainless steel acc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internally threaded needle valve 1 1/2 inch stainless steelacc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Disco check valve DN 150, intermediate flange PN10 to PN40 ANSI150, Face to face acc. to EN 558-1- series 49, Body, disc made of stainless steel (1.4408 / 1.4581), spring made of stainless steel (1.4571), seat made of metallic, Max. Operating pressure 40 bar
Wafer type double plate check valve DN 50 PN10/16Installation between flanges acc. to DIN PN10/16, body made of (GGG40)ductile iron, plates made of CF8M stainless steel, shaft & spring made of stainless steel (SS316), gasket EPDM vulcanised (max. 120°C), Max. Max. operating pressure 16 bar, paint epoxy 150µm, RAL 5015
