Flanged ball valve DN 80, connection acc. to DIN PN16, face to face EN 558-1-series 14 (F4), ball seal TFM1600(PTFE), ball made of stainless steel, body made of steel (1.0619), approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with hand lever
Nominal width :DN80 3'' inch
Connection :Flange PN10 , Flange PN16
Design :2 ways
Body:Steel
Material ball :Stainless steel (1.4301)
Ball seal:TFM 1600 (PTFE)
Face to Face length :EN 558-1 series 14
Actuation :Hand Lever
Certificate :TA Luft, Fire Safe, AD2000-A4
Option:Full passage
Availability:In Stock
Tender
FERGO ball valve type KH155-CS1TLF-DN80 Flange connection: DIN PN16 Face-to-face : DIN EN 558-1 (basic series 14)/acc. to DIN 3202 F4 Full bore : 2-piece Body: 1.0619 (A216 WCB) Ball : 1.4301 (A351 CF8) Shaft: AISI 304 Seal ball: TFM 1600 Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 16bar Direct drive assembly: ISO 5211 Approval: TA-Luft, Firesafe ATEX: II 2G Ex h IIB T3 Gb / II 2D Ex h IIIC T180°C Db SIL3 IEC 61508:2010 Actuation: Hand lever
Disco check valve DN 100 spring loaded, intermediate flange PN6 up to 40 ANSI150/300, Face to face acc. to EN 558-1- series 49, Body, disc made of stainless steel (1.4408 / 1.4581), spring stainless steel (1.4571), seat made of metallic, With 4 earthing lugs, Max. Operating pressure 40 bar
Sight glass flange connection acc. to DIN 2501 PN16, face to face acc. to EN588-1 series-1, body made of stainless steel (1.4408)(CF8M), glass made of pressed hard glass, gasket made of PTFE, pressure range 10/16 bar
Stainless steel sight glass 1 1/2 inch Female thread acc. to ISO 7-1 (EN 10226-1), body stainless steel (1.4408)(CF8M), glass soda lime hard glass, gasket PTFE, max. operating pressure 16 bar.
Sight glass Flange connection acc. to DIN 2501 PN16, Overall length acc. to EN588-1 Series-1, Housing made of stainless steel (1.4408)(CF8M), Glass made of pressed hard glass, Sealmade of PTFE, Pressure range 10/16 bar
Stainless steel sight glass 3/4 inch female thread acc. to ISO 7-1 (EN 10226-1), F-F, body stainless steel (1.4408)(CF8M), glass soda lime hard glass, gasket PTFE, Max. Operating pressure 16 bar
Flange Y strainer DN 80 stainless steelFlange connection PN10/16/40, type B1, EN 1092-1, Construction length according to EN 558-1, series 1, Body/cover stainless steel (1.4408), strainer stainless steel (SS316), Mesh sizeØ1,25 mm, Working temperature range -40°C to +450°C, approval AD2000 A4
Flanged steel Y-Strainer DN 15 PN40Connection PN40, EN 1092-1 type B1, Face-to-face length to EN 558-1, series 1, Body/cover made of steel (1.0691) GS-C25 RAL 5015, strainer made of stainless steel (SS304), Mesh size Ø1 mm, Working temperature range -10°C to +400°C, approval AD2000 A4
Internal thread Y strainer 2 1/2 in Connection acc. to ISO 228, body & cover made of brass, filter made of stainless steel 1.4301, mesh size Ø 800 µm(0.8mm), gaskets NBR, nominal pressure 20 bar, temp. min./max.: -20°C to +110°C
Flange Y-strainer DN 80 stainless steel Flange acc. to DIN 2501 PN16, length acc. to EN 558-1, series 1, body/cover stainless steel (1.4408) shot-blasted, strainer filter stainless steel 1.4408, gaskets PTFE, mesh size Ø2mm (other sizes on request), working temperature range -30°C to +230°C
