Flanged ball valve DN 80, connection acc. to DIN PN40, face to face EN 558-1 series 14 (F4), ball seal made of TFM1600(PTFE), body made of steel(1.0619), ball made of stainless steel, approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with hand lever
Nominal width :DN80 3'' inch
Connection :Flange PN40
Design :2 ways
Body:Steel
Material ball :Stainless steel (1.4301)
Ball seal:TFM 1600 (PTFE)
Face to Face length :EN 558-1 series 14
Actuation :Hand Lever
Certificate :TA Luft, Fire Safe, AD2000-A4
Option:Full passage
Availability:In Stock
Tender
FERGO ball valve type KH155-CS1TLF-DN80 Flange connection: DIN PN40 Face-to-face : DIN EN 558-1 (basic series 14)/acc. to DIN 3202 F4 Full bore : 2-piece Body: 1.0619 steel (A216 WCB) Ball : 1.4301 stainless steel (A351 CF8) Shaft: AISI 304 Seal ball: TFM 1600 (PTFE) Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 40bar Direct drive assembly: ISO 5211 Approval: TA-Luft, Firesafe ATEX: II 2G Ex h IIB T3 Gb / II 2D Ex h IIIC T180°C Db SIL3 IEC 61508:2010 Actuation: Hand lever
Rubber expansion joint DN 100 for vacuum application Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150mm, Bellow EPDM, nylon cord reinforced, Flanges stainless steel, Max. working pressure 16 bar with vacuum support ring DN 100 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 200 for the pipeline, DIN PN10, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 10 bar
Rubber expansion joint DN 32 for the pipeline Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Flowserve Durco sleeveline G4E DN 100, flange connection acc. to DIN EN 1092-1-PN16, face to face EN 558-1, series 1 (ISO 5752), plug & body made of stainless steel (1.4408), diaphragm made of PFA, approval TA-Luft with hand lever
Flowserve DURCO Sleeveline G4Z plug valve 2 inch, Flange connection acc. to ANSI B16.5. Class150, RF, Face to face acc. to ANSI B16.10, Reduced passage, Plug stainless steel 1.4408, Body stainless steel 1.4408, Diaphragm PFA, Approval TA Luft, Fire safe with hand lever
Flowserve Durco Plug Valve DN50, Flanged connection acc. to DIN EN 1092-2-PN10/16, Face to face dimension acc. to EN558, series-1, Plug ductile cast iron GGG40.3-PFA coated, body ductile cast iron-PFA lined, with hand lever
GESTRA MK 45-1 1 inch ASME B 16.5 class 300 RFRhombusline thermostatic steam trap, With tandem diaphragm 5N1 (standard) for small condensate quantities, With Y-type strainer and integrated water hammer protection, Installation between flanges ASME B 16.5, Class300 RF, Face-to-face dimension 160mm, Body and bonnet 1.0460 / ASTM A105, Sealing ring graphite/CrNi, Control diaphragm: Hastelloy®, Internal parts: Stainless steels
Steam trap GESTRA BK 15 G1 1/2"Thermostatic steam trap with bimetallic regulator, Connection: female threads according to EN ISO 228-1 , face-to-face dimension: 130mm, body, bonnet 1.0460/ASTM A105, body gasket graphite, Thermovit disc stainless steel/duostainless steel, internal parts stainless steel with integrated strainer and non-return valve.
GESTRA BK 45 1/2 inch ASME B 16.5 class 150Installation between flanges ASME B 16.5, class 150 RF, Face to face: 150mm, body & bonnet 1.0460/ASTM A105, gasket: graphite/CrNi, regulator with stainless steel duo steel plates, stainless steel internal parts
GESTRA MK 45-2, DN15 GESTRA Rhombusline thermostatic steam trap, With single seat standard capsule 5N2 for larger condensate flowrates, With Y-strainer and integrated water hammer protection, Installation between flanges EN 1092, PN40, form B1, Face-to-face dimension 150mm, Body and bonnet 1.0460 / ASTM A105, Sealing ring graphite/CrNi, Control diaphragm: Hastelloy®, Internal parts: Stainless steels
