Flanged ball valve DN 20, connection acc. to DIN PN16/40, face to face EN 558-1 series 1 (F1), ball seal made of TFM1600(PTFE), body made of steel(1.0619), ball made of stainless steel, approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with pneumatic actuator single acting
FERGO ball valve type Ball valve KH155-CS1TLF-DN20[F1]PN40 with SR actuator Flange connection according to DIN PN16/40 Face-to-face: DIN EN 558-1 (basic series 1)/acc. to DIN 3202 F1 Full bore, 2-piece Body: 1.0619 steel (A216 WCB) Ball: 1.4301 stainless steel (A351 CF8) Shaft: AISI 304 Seal ball: TFM 1600 (PTFE) Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 40bar Approval: TA-Luft, Firesafe ATEX Ex II 2 GD c T3 SIL3 IEC 61508:2010 Actuation: Pneumatik-Antrieb SR1-40-AN-F04-C14-NC Design: Single-acting, 90° pivoting spring force closing Housing: Aluminium, hard anodised Number of springs: 14 Max. Operating pressure: 8 bar
Flanged butterfly valve DN 100 HandwheelFlange connection PN10/16, tight-closing, centric, body made of nodular cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of FPM/FKM (Viton) with gearbox handwheel
Flanged butterfly valve DN 200 for water, Connection flanges PN10, Optional PN16 or 150lbs, Body made of spheroidal cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of EPDM, Approval: DVGW for drinking water with gearbox.
Wafer type butterfly valve DN 65, connection PN6/10/16/150lbs, body made of nodular cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of NBR, approval: DVGW Gas with hand lever (Al)
Wafer type butterfly valve DN 25 connection PN10/16, body made of nodular cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of EPDM, DVGW drinking water with electric quarter-turn actuator J4C-S20, running time (90°): 9s ± 10%, multivoltage 24V - 230V - 240V AC/DC
Wafer-type knife gate valve/flat knife gate valve DN 125 PN10, single-seated design, seat ring made of NBR, body made of grey cast iron (GG25), valve plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305) with pneumatic double acting
Knife gate valve DN 65 PN10 Wafer-type unidirectional design, body made of stainless steel CF8M(1.4408), seat ring made of EPDM, gate made of stainless steel SS316L (1.4404), stem made of stainless steel SS303 (1.4305), actuation: handwheel with rising stem
Wafer-type knife gate valve/flat knife gate valve DN 125 PN10, single-seated design, seat ring made of NBR, body made of grey cast iron (GG25), knife gate valve plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305), actuation handwheel with rising stem
Knife gate valve DN 65 PN10Double poppet design, seat ring made of EPDM with profile steel core reinforcement, body made of grey cast iron (GG25), gate plate & stem made of stainless steel, plate guide with integrated scraping effect, packing PTFE-Synt./EPDM/PTFE-Synt, operation handwheel with rising stem
Rubber expansion joint DN 250 for the pipeline, DIN PN10, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 10 bar
Rubber expansion joint DN 65 for the pipeline Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Rubber expansion joint stainless steel DN 300 EPDM DIN PN10, Face to Face 130mm, EPDM, nylon reinforced, Flange stainless steel, Max. working pressure 10 bar
Rubber expansion joint DN 300 for the pipeline, DIN PN10, Face to Face 130mm, EPDM, nylon reinforced, Flanges galvanized steel, Max. working pressure 10 bar
