Flanged ball valve DN 25, connection acc. to DIN PN16/40, face to face EN 558-1 series 1 (F1), ball seal made of TFM1600(PTFE), body made of steel(1.0619), ball made of stainless steel, approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with pneumatic actuator double acting
FERGO ball valve type Ball valve KH155-CS1TLF-DN25 PN40 with DA actuator Flange connection according to DIN PN16/40 Face-to-face: DIN EN 558-1 (basic series 1)/acc. to DIN 3202 F1 Full bore, 2-piece Body: 1.0619 steel (A216 WCB) Ball: 1.4301 stainless steel (A351 CF8) Shaft: AISI 304 Seal ball: TFM 1600 Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 40bar Approval: TA-Luft, Firesafe ATEX Ex II 2 GD c T3 SIL3 IEC 61508:2010 Actuation: Pneumatik-Antrieb DA1-40-AN-F05-C14 Design: Double-acting, 90° pivoting Housing: Aluminium, hard anodised Max. Operating pressure: 8 bar
Stainless steel butterfly valve DN 200 with hand leverLug butterfly valve connection PN10, butterfly valve body & disc made of stainless steel (1.4408), seat ring made of EPDM, temp. (min. max.) -10°C to +120°C with hand lever
Flanged butterfly valve DN 200 PN10 NBR electric actuator 24V - 230V AC/DCLug type butterfly valve connection PN10, butterfly valve body made of nodular cast iron GGG40, butterfly valve disc made of stainless steel 1.4408, seat ring made of NBR, actuated: electric quarter-turn actuator J4C-S300, running time (90°): 58s ± 10%, multivoltage 24V -230V - 240V AC/DC
Wafer type butterfly valve DN 32, connection PN6/10/16/150lbs, body made of nodular cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of EPDM, approval: DVGW drinking water with hand lever (Al)
Flanged butterfly valve DN 50, connection flanges PN10/16, body made of cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of EPDM, approval: DVGW for drinking water with gearbox
Knife gate valve DN 50 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 50 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 65 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 80 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 100 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 125 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 150 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 200 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 250 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 300 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 65 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 80 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 100 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 125 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 150 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 200 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 250 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 300 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 50 PN10 Wafer-type unidirectional design, body made of stainless steel CF8M(1.4408), seat ring made of EPDM, gate made of stainless steel SS316L (1.4404), stem made of stainless steel SS303 (1.4305), actuation: handwheel with rising stem
Wafer type knife gate valve DN 65 PN10Design bi-directional, seat ring made of EPDM with profile steel core reinforcement, body made of grey cast iron (GG25), gate plate & stem made of stainless steel, plate guide with integrated scraping effect, packing PTFE-Synt./EPDM/PTFE-Synt. with quick closing lever steel painted
Wafer-type knife gate valve/flat knife gate valve DN 65 PN10, single-seated design, seat ring made of NBR, body made of grey cast iron (GG25), knife gate valve plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305) with pneumatic double acting
Wafer-type knife gate valve/flat knife gate valve DN 65 PN10, single-seated design, seat ring made of metal, body made of grey cast iron (GG25), valve plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305) with pneumatic double-acting actuator
Disco check valve DN 80 spring loaded, intermediate flange connection PN6 up to 40 - ANSI150/300, Face to face acc. to EN 558-1- series 49, Body, disc made of stainless steel (1.4408 / 1.4581), spring made of stainless steel (1.4571), seat made of EPDM, With 4 earthing lugs, Max. Operating pressure 40 bar
Wafer-type check valve DN 125, flanged connection PN16, seat seal FPM Viton, body & butterfly valve made of stainless steel (1.4408), max.pressure 16bar, Temperature range: -10°C to +180°C
Wafer type check valve DN 100, flange connection PN10/16 acc. to EN 1092-1 form B, body made of steel 1.0619 galvanised, valve made of steel galvanised (1.0619), seat gasket NBR, screws stainless steel, max.pressure 16bar
