Flanged ball valve DN 32, connection acc. to DIN PN16/40, face to face EN 558-1 series 1 (F1), ball seal made of TFM1600(PTFE), body & ball made of stainless steel (1.4408), approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with pneumatic actuator single acting
FERGO ball valve type KH155-SSTLF-DN32[F1]PN40 with SR actuator Flange connection according to DIN PN16/40 Face-to-face: DIN EN 558-1 (basic series 1)/acc. to DIN 3202 F1 Full bore, 2-piece Body: 1.4408 (A351 CF8M) Ball: 1.4408 stainless steel (A351 CF8M) Shaft: 1.4408 stainless steel (A351 CF8M) Seal ball: TFM 1600 Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 40bar Approval: TA-Luft, Firesafe ATEX Ex II 2 GD c T3 SIL3 IEC 61508:2010 Actuation: Pneumatik-Antrieb SR1-80-AN-F05/F07-C17-NC Type: Single-acting, 90° pivoting spring force closing Housing: Aluminium, hard anodised Max. Operating pressure: 8 bar
Stainless steel wafer type butterfly valve DN 125 with hand lever Butterfly valve connection PN10/16/150lbs, butterfly valve body & butterfly valve disc made of stainless steel (1.4408), seat ring made of EPDM with hand lever (Al)
Flanged butterfly valve DN 80, connection flanges PN10/16, body made of nodular cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of EPDM with gear - handwheel
Wafer type butterfly valve DN 50, connection PN6/10/16/150lbs, body made of ductile cast iron GGG40, disc made of stainless steel 1.4408, seat ring EPDM DVGW drinking water with pneumatic quarter-turn actuator single acting
Wafer type butterfly valve DN 40 connection PN6/10/16/150lbs, body made of nodular cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of NBR, approval DVGW gas with electric actuator J4C-S20, running time (90°): 9s ± 10%, multivoltage 24V - 230V - 240V AC/DC
Wafer-type knife gate valve/flat knife gate valve DN 125 PN10, single-seated design, seat ring made of NBR, body made of grey cast iron (GG25), valve plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305) with pneumatic double acting
Wafer-type knife gate valve/flat knife gate valve DN 100 PN10, single-seated design, seat ring made of EPDM, body made of grey cast iron (GG25), knife gate valve plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305) with pneumatic double-acting actuator
Knife gate valve DN 100 PN10 Wafer-type unidirectional design, body made of stainless steel CF8M(1.4408), gate made of stainless steel SS316L (1.4404), stem made of stainless steel SS303 (1.4305), seat ring made of EPDM, actuation: handwheel with rising stem
Wafer-type knife gate valve/flat knife gate valve DN 125 PN10, single-seated design, seat ring made of NBR, body made of grey cast iron (GG25), knife gate valve plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305), actuation handwheel with rising stem
Disco check valve DN 25 spring loaded, intermediate flange PN6 up to 40 ANSI150/300, Face to face acc. to EN 558-1- series 49, Body, disc made of stainless steel (1.4408 / 1.4581), spring made of stainless steel (1.4571), seat made of metallic, With 4 earthing lugs, Max. Operating pressure 40 bar
Lift check valve DN 32 made of steelPiston check valve with nominal pressure: PN40, face-to-face dimension to EN 558-1, series 1, flange connection PN10/16/40 with type B1, EN 1092-1, body/cover made of steel 1.0619, disc made of 13Cr, spring made of stainless steel SSS304. Cover gasket made of SSS304 + graphite, operating temperature range -10°C to +400°C
Lift check valve DN 40 made of stainless steelPiston check valve with nominal pressure: PN40, face-to-face dimension to EN 558-1, series 1, flange connection PN10/16/40 with type B1, EN 1092-1, body/cover made of stainless steel 1.4408, disc made of F316, spring made of stainless steel SSS316. Cover gasket made of SSS304 + graphite, operating temperature range -10°C to +450°C
