Stainless steel flanged ball valve DN 200, connection acc. to DIN PN16, face-to-face length EN 558-1-series 15, ball seal made of TFM1600(PTFE), ball & body made of stainless steel (1.4408), approval: TA-Luft, Firesafe, ATEX, AD2000-A4 with pneumatic quarter-turn actuator double acting
Nominal width :DN200 - 8'' inch
Connection :Flange PN10 , Flange PN16
Design :2 ways
Body:Stainless Steel
Material ball :Stainless steel (1.4408)
Ball seal:TFM 1600 (PTFE)
Face to Face length :EN 558-1 series 15
Temperature range :-29°C to +175°C
Actuation :Pneumatic Actuator
Max. Operating pressure :16 bar
Certificate :TA Luft, Fire Safe, AD2000-A4
Option:Double Acting , Full passage
Availability:In Stock
Tender
FERGO ball valve type Ball valve KH155-SSTLF-DN200 PN16 with DA actuator Flange connection according to DIN PN16 Face-to-face: DIN EN 558-1 (basic series 15)/acc. to DIN 3202 F5 Full bore, 2-piece Body: 1.4408 (A351 CF8M) Ball: 1.4408 stainless steel (A351 CF8M) Shaft: 1.4408 stainless steel (A351 CF8M) Seal ball: TFM 1600 (PTFE) Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 16bar Approval: TA-Luft, Firesafe ATEX Ex II 2 GD c T3 SIL3 IEC 61508:2010 Actuation: Pneumatik-Antrieb DA1-1200-AN-F10/F14-C36 Design: Double-acting, 90° pivoting Housing: Aluminium, hard anodised Max. Operating pressure: 8 bar
Butterfly valve wafer type stainless steel DN 150 with hand lever Butterfly valve connection PN10/16/150lbs, butterfly valve body & butterfly valve disc made of stainless steel (1.4408), seat ring made of EPDM with hand lever (Al)
Flanged butterfly valve DN 50 with hand leverButterfly valve connection PN10/16, butterfly valve body & disc made of stainless steel (1.4408), seat ring made of EPDM, temp. (min. max.) -10°C to +120°C with hand lever (Al)
Flanged butterfly valve DN 50, connection flanges PN10/16, body made of cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of EPDM, approval: DVGW for drinking water with gearbox
Wafer type butterfly valve DN 300, connection PN6/10/16/150lbs, tight closing, centric bearing, body made of nodular cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of FPM/FKM(Viton) with regulating lever (Al)
Wafer-type knife gate valve/flat knife gate valve DN 100 PN10, single-seated design, seat ring made of EPDM, body made of grey cast iron (GG25), knife gate valve plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305) with pneumatic double-acting actuator
Knife gate valve DN 150 PN10 Wafer-type unidirectional design, body made of stainless steel CF8M(1.4408), gate made of stainless steel SS316L (1.4404), stem made of stainless steel SS303 (1.4305), seat ring made of EPDM, actuation: handwheel with rising stem
Wafer-type knife gate valve/flat knife gate valve DN 125 PN10, single-seated design, seat ring made of NBR, body made of grey cast iron (GG25), knife gate valve plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305), actuation handwheel with rising stem
Knife gate valve DN 65 PN10Double poppet design, seat ring made of EPDM with profile steel core reinforcement, body made of grey cast iron (GG25), gate plate & stem made of stainless steel, plate guide with integrated scraping effect, packing PTFE-Synt./EPDM/PTFE-Synt, operation handwheel with rising stem
Rubber expansion joint DN 250 with vacuum ring Flanges according to DIN PN10, Design rubber expansion joint, Face to face: 200 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 10 bar with vacuum support ring DN 250 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 250 for the pipeline, DIN PN10, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 10 bar
