Rubber expansion joint DN 200 for the pipeline Flanges according to DIN PN16, Design rubber expansion joint, Face to face: 150 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Rubber expansion joint DN 200 for the pipeline Flanges according to DIN PN10, Design rubber expansion joint, Face to face: 150mm, Bellow EPDM, nylon cord reinforced, Flanges stainless steel, Max. working pressure 10 bar
Rubber expansion joint DN 200 with vacuum support ringDIN PN10, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 10 bar with vacuum support ring DN 200 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 200 for the pipeline, DIN PN16, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Internal thread needle valve 1/2 inch stainless steel acc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internally threaded needle valve 1/4 inch stainless steelacc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internally threaded needle valve 2 inch stainless steelacc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internally threaded needle valve 1 1/2 inch stainless steelacc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Flowserve DURCO Sleeveline G4Z Plug valve 4 inches, Flange connection acc. to ANSI B16.5. Class150, RF, Face-to-face length acc. to ANSI B16.10, Reduced passage, Plug made of stainless steel 1.4408, Body made of stainless steel 1.4408, Diaphragm PFA, Approval TA Luft, Fire safe with gear box
Flowserve Durco sleeveline G4E DN 100, flange connection acc. to DIN EN 1092-1-PN16, face to face EN 558-1, series 1 (ISO 5752), plug & body made of stainless steel (1.4408), diaphragm made of PFA, approval TA-Luft with hand lever
Flowserve Durco Plug Valve 3/4" inch, Flanged connection acc. to ASME B16.5-150lbs, Face to Face dimension acc. to ASME B16.10-short pattern, Plug ductile cast iron GGG40.3-PFA coated, body ductile cast iron-PFA lined, with hand lever
Flowserve Durco sleeveline G4E DN 15, flange connection acc. to DIN EN 1092-1-PN16/40, face to face EN 558-1, series 1 (ISO 5752), plug & body made of stainless steel (1.4408), diaphragm made of PFA, approval TA-Luft with hand lever
