Rubber expansion joint DN 300 with vacuum support ring
DIN PN10, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 10 bar with vacuum support ring DN 300 with SS316 - The movement capacity is reduced by approx. 50%.
Nominal width :DN300 - 12'' inch
Vacuum ring :DN300, Stainless steel
Connection :Flange PN10
Design :Rubber compensator
Flange:Galvanised steel
Face to Face length :130mm
Material Bellow:NBR
Temperature range : max. +90°C (depending on operating pressure)
Rubber expansion joint DN 300 for the pipeline, DIN PN16, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Rubber expansion joint DN 300 with vacuum support ring DIN PN16, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 300 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 300 for the pipeline Flanges according to DIN PN10, Design rubber expansion joint, Face to face: 200 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 10 bar
Rubber expansion joint vacuum support ring DN 300 Flanges according to DIN PN16, Design rubber expansion joint, Face to face: 200 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 300 with SS316 - The movement capacity is reduced by approx. 50%.
Wafer check valve DN 40, flange connection PN10/16/25/40 acc. to DIN 2632/2633, seat seal NBR, body made of stainless steel (1.4408), valve made of stainless steel (1.4408/1.4581), screws made of stainless steel (1.4401), max.pressure 16bar
Disco check valve DN 125 spring loaded, intermediate flange PN10 up to 40 and ANSI150, Face to face according to EN 558-1- series 49, Body, disc made of stainless steel (1.4408 / 1.4581), spring made of stainless steel (1.4571), seat made of EPDM, Max. Operating pressure 40 bar
Stainless steel sight glass 2 inch female thread acc. to ISO 7-1 (EN 10226-1), F-F, Housing Stainless steel (1.4408)(CF8M), Glass Soda-lime tempered glass, Seal PTFE, Max. Operating pressure 16 bar
Sight glass flange connection acc. to DIN 2501 PN16, face to face acc. to EN588-1 series-1, body made of stainless steel (1.4408)(CF8M), glass made of pressed hard glass, gasket made of PTFE, pressure range 10/16 bar
Flowserve Atomac Sight Glass DN40 Flanged connection acc. to DIN EN 1092-2, PN16, Face to Face acc. to DIN EN 558, Series 1, Body Ductile Iron GGG40.3-PFA-ausgekleidet, Glas Borosilicate Glass acc. to DIN 7080, Max. operating pressure 16 bar
Flowserve Atomac Sight Glass DN25, Flanged connection acc. to DIN EN 1092-2, PN16, Face to Face acc. to DIN EN 558, Series 1, Body Ductile Iron GGG40.3-PFA-ausgekleidet, Glas Borosilicate Glass acc. to DIN 7080, Max. operating pressure 16 bar
