Rubber expansion joint DN 250 with vacuum support ring
DIN PN16, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 barwith vacuum support ring DN 250 with SS316 - The movement capacity is reduced by approx. 50%.
Nominal width :DN250 - 10'' inch
Vacuum ring :DN250, Stainless steel
Connection :Flange PN16
Design :Rubber compensator
Flange:Galvanised steel
Face to Face length :130mm
Material Bellow:NBR
Temperature range : max. +90°C (depending on operating pressure)
Rubber expansion joint DN 125 with vacuum support ringDIN PN10/16, Face to Face 130mm, EPDM, nylon reinforced, Flanges stainless steel, Max. working pressure 16 bar with vacuum support ring DN 125 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 125 for the pipeline Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150mm, Bellow EPDM, nylon cord reinforced, Flanges stainless steel, Max. working pressure 16 bar
Rubber expansion joint DN 125 for the pipeline, DIN PN10/16, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Rubber expansion joint with vacuum support ring DN 125 Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 125 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 125 with vacuum support ringDIN PN10/16, Face to Face 130mm, EPDM, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 125 with SS316 - The movement capacity is reduced by approx. 50%.
Wedge gate valve DN 50 drinking waterFlanged bore acc. to EN 1092-2 - PN10/16, body & wedge made of EN-GJS-400-15 (GGG40) nodular cast iron, wedge EPDM coated, face-to-face dimensions acc. to EN 558-1, series 14, Approval: DVGW drinking water with handwheel
Wedge gate valve DN 40 PN16 made of steel, flange connection acc. to EN 1092-1 form B1, face-to-face dimensions acc. to EN 558-1, series 14, body & cover steel (1.0619), wedge steel(1.0619)+13Cr, seat 13Cr, Approval: AD2000, NACE, TA Luft, Max. Max. operating pressure 16 bar, Max. Operating temp. 400°C
Sleeve gate valve 2 1/2 inch brass - Gate valve for water pipes, female thread Gate valve DN 65threaded connection ISO 228 female thread, Body made of brass CW617N, Wedge made of brass CW617N, Seat seal metallic, Working pressure: 16 bar/232psi, Handwheel made of steel
Stainless steel flanged shut-off valve DN 80 PN40Flange connection acc. to EN 1092-1 form B1, Face to face acc. to EN 558-1, series 1, Body & cover stainless steel 1.4408 (CF8M), Gland packing graphite (TA Luft), Body gasket: SS304 + graphite (TA Luft), Max. Operating temperature: 400°C, Actuation handwheel (rising stem), Approval AD2000, NACE, PED2014/68/EU, TA Luft
Flanged shut-off valve DN 125Flange connection acc. to EN 1092-1 form B1, Face to face acc. to EN 558-1, series 1, Body & cover made of steel 1.0619, Packing gland graphite (TA Luft), Body gasket: SS304 + graphite (TA Luft), Max. Operating temperature: 400°C, Actuation handwheel (rising stem), Approval AD2000, NACE, PED2014/68/EU, TA Luft
Flanged shut-off valve DN 32 PN40 with gland packing sealFlange connection PN40 acc. to EN 1092-1, face-to-face length acc. to EN 558-1, series 1, tightness class A acc. to EN 12266-1, body made of steel 1.0619 (GP240GH), plug made of 1.4021 (X20Cr13), valve seat made of stainless steel, gland packing graphite, body gasket: SS304 + graphite, nominal pressure 40bar, Max. Temperature: +450°C (depending on operating pressure), Kvs: 17,5 m³/h, Actuation handwheel (EN-GJS-400-18-LT)
