Rubber expansion joint DN 250 with vacuum support ring
DIN PN16, Face to Face 130mm, EPDM, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 barwith vacuum support ring DN 250 with SS316 - The movement capacity is reduced by approx. 50%.
Nominal width :DN250 - 10'' inch
Vacuum ring :DN250, Stainless steel
Connection :Flange PN16
Design :Rubber compensator
Flange:Galvanised steel
Face to Face length :130mm
Material Bellow:EPDM
Temperature range :max. +110°C (depending on operating pressure)
Flanged ball valve DN 25 made of GGG40Connection acc. to DIN PN16, face-to-face length acc. to EN558-1 series 14, ball seal PTFE + glass fibre, ball made of full stainless steel(1.4404), body made of nodular cast iron(GGG40), approval: TA-Luft with hand lever, full bore, 2-piece
Flanged ball valve DN 100 PN10/16 in stainless steel Connection according to DIN PN16, face-to-face length EN 558-1-series 14 (F4), ball seal made of TFM1600(PTFE), ball & body made of stainless steel (1.4408), approval: TA-Luft, Firesafe, ATEX, AD2000-A4 with hand lever
Compact flanged ball valve acc. to DIN PN40, ball seal PTFE, ball & body stainless steel(1.4408), full bore, DVGW for gas, TA-Luft, Fire Safe with hand lever, Max.operating pressure 40bar
Socket ball valve with 4 inch female thread DN100 acc. to ISO 228 F-F, ball made of brass, hard chrome plated, ball seal PTFE, stem seal Viton (FPM/FKM), body made of brass, nickel plated for liquid and gaseous media, max. operating pressure 40 bar
Nominal width :
DN100 - 4'' inch
Design :
2 ways
Connection :
Female thread
Body:
Brass
Ball seal:
PTFE
Temperature range :
Air: -20°C to +150°C Water: 0°C to +150°C Gas: -20°C to +60°C
J4C S55 Electric quarter-turn actuator J4C S55 Electric quarter-turn actuator suitable for mounting flange ISO 5211 F05/F07, voltage 24V - 230V - 240V (AC)/24 to 135V (DC), running time (90°)- 13s ± 10%, working torque 55Nm, duty cycle 75%, connection 17mm (other stem sizes and biplane option at request), housing polyamide (PA6), protection class IP67
Flange size ISO 5211 F05/F07, double-acting, 90° pivoting, spring force closing (Normally Closed), aluminium housing, hard anodised, 17mm star, 14 springs, NBR seals, max. operating pressure 8 bar. Operating pressure 8 bar
J4C S140 DPS Positioner Fail-Safe BSR Battery NC J4C S140 with positioner 4-20mA [0-10V on request] with fail-safe BSR battery pack (function NC) electric rotary actuator, suitable for mounting flange ISO 5211 F07/F10, multi - voltage 24V - 230V to 240V (AC)/24V to 135V(DC), running time(90°) 34s ± 10%, working torque: 85Nm, duty cycle 75%, mounting VKT22mm (other square sizes and dual flat option available on request)
