Rubber expansion joint DN 80 with vacuum support ring
DIN PN10/16, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 barwith vacuum support ring DN 80 with SS316 - The movement capacity is reduced by approx. 50%.
Nominal width :DN80 3'' inch
Vacuum ring :DN80, Stainless steel
Connection :Flange PN10 , Flange PN16
Design :Rubber compensator
Flange:Galvanised steel
Face to Face length :130mm
Material Bellow:NBR
Temperature range : max. +90°C (depending on operating pressure)
Three-way ball valve DN 100 PN16 stainless steelDesign 3-way L bore, full port, Flanged ends acc. to DIN PN16, body & ball 1.4408 (A351 CF8M) stainless steel, ball seat TFM 1600, Temp. (min./max.) -29°C bis +175°C, Max. operating pressure 40 bar, TA Luft Design, ATEX, operation: Hand lever
Stainless steel flanged ball valve DN 25, connection acc. to DIN PN16/40, face-to-face length EN 558-1-series 14 (F4), ball seal made of TFM1600(PTFE), ball & body made of stainless steel (1.4408), approval: TA-Luft, Firesafe, ATEX, AD2000-A4 with hand lever
Stainless steel ball valve 1 1/4 inch DN 32 female thread connection acc. to ISO 228-1 F-F, body & ball stainless steel CF8M (1.4408), gasket TFM 1600, full bore, 3 parts, approval TA-Luft, ATEX, AD2000-A4 with hand lever
Compact flanged ball valve connection acc. to DIN PN40, ball seal PTFE, ball & body stainless steel(1.4408), full bore, DVGW for gas, TA-Luft, Fire Safe with hand lever, Max.operating pressure 40bar
Wafer type butterfly valve DN 80 PN10/16Wafer butterfly valve connection PN10/16/150lbs, body made of nodular cast iron GGG40, disc stainless steel (1.4408), seat ring NBR with hand lever
Lug butterfly valve DN 125 PN10/16 with hand leverButterfly valve connection PN10/16, butterfly valve body & disc made of stainless steel (1.4408), seat ring made of EPDM, temp. (min. max.) -10°C to +120°C with hand lever (Al)
PTFE butterfly valve DN 65, connection PN10/PN16, body made of EN-GSJ-500-7 (GGG50) nodular cast iron, disc made of ASTM A182 F316 (CF8M) stainless steel, seal made of PTFE with hand lever (Al)
Flanged butterfly valve DN 50, connection flanges PN10/16, body made of cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of EPDM, approval: DVGW for drinking water with gearbox
Wafer-type knife gate valve/flat knife gate valve DN 125 PN10, single-seated design, seat ring made of metal, body made of grey cast iron (GG25), valve plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305) with pneumatic double-acting actuator
Knife gate valve DN 50 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 50 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 65 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 80 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 100 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 125 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 150 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 200 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 250 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 300 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 65 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 80 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 100 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 125 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 150 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 200 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 250 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 300 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 50 PN10 Wafer-type unidirectional design, body made of stainless steel CF8M(1.4408), seat ring made of EPDM, gate made of stainless steel SS316L (1.4404), stem made of stainless steel SS303 (1.4305), actuation: handwheel with rising stem
Flanged knife gate valve DN 80 PN10Design bi-directional, seat ring made of NBR with profile steel core reinforcement, body made of grey cast iron (GG25), gate plate & stem made of stainless steel, handwheel with non-rising stem
Knife gate valve DN 100 PN10 pneumaticDouble poppet design, seat ring U-bolt seal NBR with profile steel core reinforcement, body made of grey cast iron (GG25), gate plate & stem made of stainless steel, plate guide with integrated scraping effect, packing PTFE-Synt./NBR/PTFE-Synt. with pneumatic double-acting
