Rubber expansion joint DN 80 with vacuum support ring
DIN PN10/16, Face to Face 130mm, EPDM, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 80 with SS316 - The movement capacity is reduced by approx. 50%.
Nominal width :DN80 3'' inch
Vacuum ring :DN80, Stainless steel
Connection :Flange PN10 , Flange PN16
Design :Rubber compensator
Flange:Galvanised steel
Face to Face length :130mm
Material Bellow:EPDM
Temperature range :max. +110°C (depending on operating pressure)
Flanged ball valve DN 100 hand leverConnection acc. to DIN PN10/16, face to face EN 558-1 series 1 (F1), ball seal made of TFM1600(PTFE), body made of steel(1.0619), the ball made of stainless steel, approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with Hand lever
Gas flanged ball valve DN40 electric actuator 24V - 230V, connection acc. to DIN PN16, face-to-face length acc. to EN558-1 series 14, ball seal PTFE, ball made of stainless steel(1.4404), body made of spheroidal cast iron(GGG40), approval DVGW for gas, TA-Luft, full bore, 2-piece with electric rotary actuator 90 degree -J4C S35, running time(90°) 9s ± 10%, 24V - 230V - 240V AC/DC
Stainless steel flanged ball valve DN 32 with duplex stemConnection acc. to DIN PN40, face to face acc. to EN 558-1, series 27, ball seat rings: PTFE+25% GF (soft sealing), ball & body made of stainless steel (1.4408), stem made of 1.4462 Duplex stainless steel, full bore, 2 parts, double packing, blow out proof ball, antistatic design, approval: TA-Luft, Firesafe, ATEX, Max. Operating pressure: 40bar with hand lever
Flanged ball valve DN 15 PN16/40, connection acc. to DIN PN16/40, face-to-face length EN 558-1-series 14 (F4), ball seal TFM1600(PTFE), ball made of stainless steel, body made of steel (1.0619), approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with hand lever
Ball valve 1 1/2 inch male thread ISO 7/1 R - female thread ISO 7/1 Rp (M-F), Ball brass chrome plated, Seal ballPTFE, O-ring Viton/NBR, Housing brass nickel plated for liquid and gaseous media, DVGW Gas Max. Operating pressure 30 bar
Internal thread ball valve 1 1/2 inch acc. to ASME B1.20.1 NPT, Body made of stainless steel (1.4408)(CF8M), Ball made of stainless steel (1.4408)(CF8M), chrome plated, Seal ball made of PTFE+15% G.F, Max. Operating pressure 63 bar
Stainless steel ball valve 1 1/4 inch DN 32 female thread connection acc. to ISO 228-1 F-F, body & ball stainless steel CF8M (1.4408), gasket TFM 1600, full bore, 3 parts, approval TA-Luft, ATEX, AD2000-A4 with hand lever
Internal thread ball valve 2 inch, ball valve according to ISO 228 F-F, Ball brass, hard chrome plated, Sealball PTFE, Sealshaft Viton (FPM/FKM), Body brass, nickel plated for liquid and gaseous media, Max. Operating pressure 25 bar
Three-way flanged ball valve DN 40 PN16/40 stainless steel3-way L bore design, full bore, flanged connection acc. to DIN PN16/40, body & ball from 1.4408 (A351 CF8M) stainless steel, gasket ball TFM 1600, Temp. (min./max.) -29°C up to +175°C, Max. Operating pressure 40 bar, TA Luft Design, ATEX, Actuation: Hand lever
Three-way Ball valve 2 inch electricT-bore design, reduced bore, internal thread acc. to ISO 7-1 (EN 10226-1), body & ball made of 1.4408, gasket PTFE + 15% GF, Operating temperature -25°C to +180°C, Max. operating pressure: 63 bar, Actuation: electric (J4C S35). Operating pressure: 63 bar, Actuation: electric (J4C S55), Running time(90°) 13s ± 10%, 24V - 230V - 240V AC/DC 50/60HZ
Brass 3-way ball valve 3/4 inch, type L bore, internal thread acc. to ISO 228 F-F-F, body made of brass, nickel-plated, ball made of brass, hard-chrome plated, seal made of PTFE, seal shaft: Viton, medium temp. (min./max.): -10°C to +120°C Not suitable for steam, Max. operating pressure: 50 bar, Manual lever operation
Three-way ball valve DN 80 PN16 pneumatic single acting actuator T-bore design, full bore, flanged connection to DIN PN16/40, body & ball made of 1.4408 stainless steel, seal TFM 1600, temp. (min./max.) -29°C up to +175°C, max. Operating pressure 16 bar, TA Luft design, ATEX with pneumatic single acting actuator (normally closed)
