The GESTRA DK 47-L steam trap is a thermodynamic condensate trap with threaded connection according to EN ISO 228-1. Equipped with an integrated strainer, the L series is designed for low condensate flowrates. The stainless steel (1.4027) body and high-quality materials ensure long service life, high reliability and efficient condensate discharge in steam and condensate system.
Categories :DK 47-L
Nominal width :DN20 - 3/4'' inch
Connection :Threaded sockets acc. to EN ISO 228-1
Body:Stainless steel (1.4027)
Temperature range :Max. to 400°C
Option:with integral strainer
Availability:In Stock
Tender
Steam trap GESTRA DK 47-L, PN63, G3/4"
Thermodynamic steam trap for low condensate flowrates With integral strainer Connection: screwed sockets acc. to EN ISO 228-1 (BSP) Body: 1.4027 / A743 CA40 Cap: 1.4005 / AISI 416 Valve disc: 1.4021 / AISI 420 Strainer: 1.4301 / A182 F304 Max. operating pressure / temperature: please see datasheet
GESTRA UNA 45hl DN 15 steam trap PN40Ball float steam trap with control unit DUPLEX, orifice (AO) 13, Installation between flanges EN 1092-1 PN40 form B1, face-to-face dimension 150mm, body 1.0460/ASTM A105, cover 5.3103 (A395), gasket graphite/CrNi, stainless steel internal parts
GESTRA MK 45-1 1 inch ASME B 16.5 class 150 RFRhombusline thermostatic steam trap, With tandem diaphragm 5N1 (standard) for small condensate quantities, With Y-type strainer and integrated water hammer protection, Installation between flanges ASME B 16.5, Class150 RF, Face-to-face dimension 160mm, Body and bonnet 1.0460 / ASTM A105, Sealing ring graphite/CrNi, Control diaphragm: Hastelloy®, Internal parts: Stainless steels
GESTRA BK 45 1/2 inch butt-weldConnection: Butt-weld ends acc. to EN 12627, edge form ISO 9692-1, code number 1.3 (30° chamfer), Pipe size: 26,9 x 2,3mm, face-to-face length: 200mm, body, bonnet 1.0460/ASTM A105, gasket: graphite/CrNi, regulator with stainless steel duo steel plates, stainless steel internal parts
Gestra RK26A disco check valve DN 40 metal sealing Disco check valve RK 26A is designed for installation between flanges PN 10/16/25/40 and ASME Class 300 and features a short face-to-face length according to EN 558-2, series 52. With a robust stainless steel body 1.4408, disc and spring made of 1.4571, and a metallic seat, it ensures maximum reliability and tight sealing. Designed according to PED 97/23EC with CE marking, the valve is suitable for liquids, gases, and vapours.
Gestra RK26A disco check valve DN 20 metal sealing Disco check valve RK 26A is designed for installation between flanges PN 10/16/25/40 and ASME Class 300 and features a short face-to-face length according to EN 558-2, series 52. With a robust stainless steel body 1.4408, disc and spring made of 1.4571, and a metallic seat, it ensures maximum reliability and tight sealing. Designed according to PED 97/23EC with CE marking, the valve is suitable for liquids, gases, and vapours.
