Float steam trap with control unit DUPLEX, orifice (AO) 2, Installation between flanges EN 1092-1 PN40 form B1, face-to-face dimension 230mm, body 1.0460/ASTM A105, cover 5.3103 (A395), gasket graphite/CrNi, stainless steel internal parts
Flowserve Durco Plug Valve DN100, Flanged connection acc. to DIN EN 1092-2-PN10/16, Face to face dimension acc. to EN558, series-1, Plug ductile cast iron GGG40.3-PFA coated, body ductile cast iron-PFA lined, with hand lever
Flowserve Durco sleeveline G4E DN 20, flange connection acc. to DIN EN 1092-1-PN16/40, face to face EN 558-1, series 1 (ISO 5752), plug & body made of stainless steel (1.4408), diaphragm made of PFA, approval TA-Luft with hand lever
Flowserve Durco Plug Valve 1" inch, Flanged connection acc. to ASME B16.5-150lbs, Face to Face dimension acc. to ASME B16.10-short pattern, Plug ductile cast iron GGG40.3-PFA coated, body ductile cast iron-PFA lined, with hand lever
Flowserve DURCO Sleeveline G4Z Plug valve 1 1/2'' inch, Flange connection acc. to ANSI B16.5. Class150, RF, Face to face acc. to ANSI B16.10, Reduced passage, Plug made of stainless steel 1.4408, Body made of steel 1.4408, Diaphragm PFA, Approval TA Luft, Fire safe with hand lever
Disco check valve DN 150, intermediate flange PN10 to PN40 ANSI150, Face to face acc. to EN 558-1- series 49, Body, disc made of stainless steel (1.4408 / 1.4581), spring made of stainless steel (1.4571), seat made of metallic, Max. Operating pressure 40 bar
Lift check valve DN 20 made of stainless steelPiston check valve with nominal pressure: PN40, face-to-face dimension to EN 558-1, series 1, flange connection PN10/16/40 with type B1, EN 1092-1, body/cover made of stainless steel 1.4408, disc made of F316, spring made of stainless steel SSS316. Cover gasket made of SSS304 + graphite, operating temperature range -10°C to +450°C
Lift check valve DN 40 made of steelPiston check valve with nominal pressure: PN40, face-to-face dimension to EN 558-1, series 1, flange connection PN10/16/40 with type B1, EN 1092-1, body/cover made of steel 1.0619, disc made of 13Cr, spring made of stainless steel SSS304. Cover gasket made of SSS304 + graphite, operating temperature range -10°C to +400°C
Rubber expansion joint DN 100 with vacuum support ring DIN PN10/16, Face to Face 130mm, EPDM, nylon reinforced, Flanges stainless steel, Max. working pressure 16 bar with vacuum support ring DN 100 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 65 for the pipeline Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Rubber expansion joint DN 200 for the pipeline Flanges according to DIN PN10, Design rubber expansion joint, Face to face: 150 mm, Bellow NBR, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 10 bar
