Brass 3-way ball valve 1 1/2 inch, type T bore, internal thread acc. to ISO 228 F-F-F, body made of brass, nickel-plated, ball made of brass, hard-chrome plated, seal PTFE, seal shaft: Viton, medium temp. (min./max.): -10°C to +120°C Not suitable for steam, Max. Max. operating pressure: 35 bar, Manual lever operation
Nominal width :DN40 - 1 1/2'' inch
Connection :Female thread
Design :3 ways
Body:Brass
Bore:T
Material ball :Brass, chrome-plated
Ball seal:PTFE
Temperature range :-10°C bis +120°C (not suitable for steam)
Three-way flanged ball valve DN 40 PN16/40 stainless steel3-way L bore design, full bore, flanged connection acc. to DIN PN16/40, body & ball from 1.4408 (A351 CF8M) stainless steel, gasket ball TFM 1600, Temp. (min./max.) -29°C up to +175°C, Max. Operating pressure 40 bar, TA Luft Design, ATEX, Actuation: Hand lever
3 way flanged ball valve DN 40 PN16/40 stainless steel3-way T-bore, full bore, flanged connection acc. to DIN PN16/40, body & ball made of 1.4408 (A351 CF8M) stainless steel, gasket ball TFM 1600, temp. (min./max.) -29°C to +175°C, max. Operating pressure 40 bar, TA Luft Design, ATEX, Actuation: Hand lever
3-way ball valve 1 1/2 inch stainless steel L bore L bore design, reduced bore, internal thread acc. to ISO 7-1 (EN 10226-1), body & ball made of 1.4408 stainless steel, blow-out proof stem and antistatic device, seal made of PTFE + 15% GF, Operating temperature -25°C to +180°C, Max. Operating pressure: 63 bar, Hand lever.
Brass 3-way ball valve 1 1/2 inch, type L bore, internal thread acc. to ISO 228 F-F-F, body made of brass, nickel-plated, ball made of brass, hard-chrome plated, seal made of PTFE, seal shaft: Viton, medium temp. (min./max.): -10°C to +120°C Not suitable for steam, Max. Max. operating pressure: 35 bar, Manual lever operation
