Brass 3-way ball valve 1/4 inch, type T bore, internal thread acc. to ISO 228 F-F-F, body made of brass, nickel-plated, ball made of brass, hard-chrome plated, seal made of PTFE, seal shaft: Viton, medium temp. (min./max.): -10°C to +120°C Not suitable for steam, Max. Max. operating pressure: 55 bar, Manual lever operation
Nominal width :DN8- 1/4'' inch
Connection :Female thread
Design :3 ways
Body:Brass
Bore:T
Material ball :Brass, chrome-plated
Ball seal:PTFE
Temperature range :-10°C bis +120°C (not suitable for steam)
Brass 3-way ball valve 1/4 inch, type L bore, internal thread acc. to ISO 228 F-F-F, body made of brass, nickel plated, ball made of brass, hard chrome plated, seal made of PTFE, seal shaft Viton, medium temp. (min./max.) -10°C to 120°C Not suitable for steam, max. operating pressure 55 bar, actuation hand lever
Three-way Ball valve 1/4 inch pneumatic actuatorT-bore design, reduced passage, internal thread to ISO 7-1 (EN 10226-1), body & ball made of 1.4408, ball seal: PTFE + 15% GF, operating temperature -25°C to +180°C, max. operating pressure: 63 bar, Actuation Pneumatic single-acting actuator (Normally closed).
3-way ball valve 1/4 inch stainless steel L boreL bore design, reduced bore, internal thread acc. to ISO 7-1 (EN 10226-1), body & ball made of 1.4408 stainless steel, blow-out proof stem and antistatic device, seal made of PTFE + 15% GF, Operating temperature -25°C to +180°C, Max. operating pressure: 63 bar, Hand lever
3-way ball valve 1/4 inch stainless steel T bore T bore design, reduced bore, internal thread acc. to ISO 7-1 (EN 10226-1), body & ball made of 1.4408 stainless steel, blow-out proof stem and antistatic device, seal made of PTFE + 15% GF, Operating temperature -25°C to +180°C, Max. Operating pressure: 63 bar, Hand lever.
Three-way ball valve 1/4 inch pneumatic actuatorL-bore design, reduced bore, internal thread to ISO 7-1 (EN 10226-1), body & ball made of 1.4408, ball seal: PTFE + 15% GF, Operating temperature -25°C to +180°C, Max. operating pressure: 63 bar, Actuation: Double-acting pneumatic actuator
3-way ball valve 1/4 inch pneumaticType L-bore, reduced bore, internal thread acc. to ISO 7-1 (EN 10226-1), body & ball made of 1.4408, seal ball: PTFE + 15% GF, Operating temperature -25°C to +180°C, Max. operating pressure: 63 bar, Actuation Pneumatic single-acting actuator (Normally closed).
