Brass 3-way ball valve 2 inch, type T bore, internal thread acc. to ISO 228 F-F-F, body made of brass, nickel-plated, ball made of brass, hard-chrome plated, seal made of PTFE, seal shaft: Viton, medium temp. (min./max.): -10°C to +120°C Not suitable for steam, Max. Max. operating pressure: 35 bar, Manual lever operation
Nominal width :DN50 - 2'' inch
Connection :Female thread
Design :3 ways
Body:Brass
Bore:T
Material ball :Brass, chrome-plated
Ball seal:PTFE
Temperature range :-10°C bis +120°C (not suitable for steam)
3-way ball valve 2 inch stainless steel L bore L bore design, reduced bore, internal thread acc. to ISO 7-1 (EN 10226-1), body & ball made of 1.4408 stainless steel, blow-out proof stem and antistatic device, seal made of PTFE + 15% GF, Operating temperature -25°C to +180°C, Max. Operating pressure: 63 bar, Hand lever.
3-way ball valve 2 inch stainless steel T bore T bore design, reduced bore, internal thread acc. to ISO 7-1 (EN 10226-1), body & ball made of 1.4408 stainless steel, blow-out proof stem and antistatic device, seal made of PTFE + 15% GF, Operating temperature -25°C to +180°C, Max. Operating pressure: 63 bar, Hand lever.
3-way ball valve DN 50 PN16/40 stainless steelDesign 3-way L bore, full port, Flanged ends acc. to DIN PN16/40, body & ball 1.4408 (A351 CF8M) stainless steel, ball seat TFM 1600, Temp. (min./max.) -29°C bis +175°C, Max. operating pressure 40 bar, TA Luft Design, ATEX, operation: Hand lever
3-way flanged ball valve DN 50 PN16/40 made of stainless steel3-way T-bore, full bore, flanged connection acc. to DIN PN16/40, body & ball made of 1.4408 (A351 CF8M) stainless steel, gasket ball TFM 1600, temp. (min./max.) -29°C to +175°C, max. Operating pressure 40 bar, TA Luft Design, ATEX, Actuation: Hand lever
3-way ball valve 1/2 inch made of brassType T bore, internal thread (BSP) acc. to ISO 228-1 F-F-F, body made of brass-nickel plated, ball made of brass-chrome plated, ball seal PTFE, stem seal PTFE, medium temp. (min./max.) -20°C to +150°C, Max. Operating pressure: 25 bar with single-acting pneumatic actuator, normally closed.
3-way ball valve 1 inch made of brassType T bore, internal thread (BSP) acc. to ISO 228-1 F-F-F, body made of brass-nickel plated, ball made of brass-chrome plated, ball seal PTFE, stem seal PTFE, medium temp. (min./max.) -20°C to +150°C, max. operating pressure: 25 bar, actuation hand lever.
3-way ball valve 1/2 inch made of brassType T bore, internal thread (BSP) acc. to ISO 228-1 F-F-F, body made of brass-nickel plated, ball made of brass-chrome plated, ball seal PTFE, stem seal PTFE, medium temp. (min./max.) -20°C to +150°C, max. operating pressure: 25 bar, Actuation: electrical (J4C S20), Running time(90°) 9s ± 10%, 24V - 230V - 240V AC/DC 50/60HZ
