Weld end acc. to ANSI B 16.25, body & ball stainless steel CF8M (1.4408), gasket ball TFM 1600, approval TA-Air, ATEX, AD2000-A4 with pneumatic actuator double acting(DA)
Nominal width :DN100 - 4'' inch
Connection :Weld-on
Design :2 ways
Body:Stainless Steel
Material ball :Stainless steel (1.4408)
Ball seal:TFM 1600 (PTFE)
Temperature range :-29°C to +175°C
Actuation :Pneumatic Actuator
Max. Operating pressure :63 bar
Certificate :TA Luft, AD2000-A4
Option:Double Acting , Full passage
Availability:In Stock
Tender
Fergo ball valve KH154-SSTHB-4" with DA actuator Weld ends according to ANSI B 16.25 Full bore 3-piece Body: Stainless steel CF8M (1.4408) Threaded ends: Stainless steel CF8M (1.4408) Ball: Stainless steel CF8M (1.4408) Seal ball: TFM 1600 (PTFE) Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 63bar Direct actuator design according to ISO 5211 Approval: TA-Luft ATEX: II 2G Ex h IIB T3 Gb / II 2D Ex h IIIC T180°C Db SIL3 IEC 61508:2010 Actuation: Pneumatik-Antrieb DA1-300-AN-F07/F10-C22 Design: Double-acting, 90° pivoting Housing: Aluminium, hard anodised Max. Operating pressure: 8 bar
Welding ends acc. to ANSI B 16.25, body & ball stainless steel CF8M (1.4408), gasket ball TFM 1600, full bore, 3 pieces, approval TA-Air, ATEX, AD2000-A4 with hand lever
Flanged ball valve DN 100 PN10/16 in stainless steel Connection according to DIN PN16, face-to-face length EN 558-1-series 14 (F4), ball seal made of TFM1600(PTFE), ball & body made of stainless steel (1.4408), approval: TA-Luft, Firesafe, ATEX, AD2000-A4 with hand lever
Flanged ball valve DN 100, connection acc. to DIN PN16, face-to-face length EN 558-1-series 14 (F4), ball seal TFM1600(PTFE), ball made of stainless steel, body made of steel (1.0619), approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with pneumatic quarter turn actuator double acting
