2-way flanged ball valve made of stainless steel with DVGW approval for gas/fuel gases according to G260/1, operated with an electric actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body and the ball are made of stainless steel (material no.: 1.4408). Full bore with PTFE seal. Actuated by a multi-voltage electric actuator (24V - 230V - 240V AC/DC) with a run time (90°): 34s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Nominal width :DN100 - 4'' inch
Connection :Flange PN10 , Flange PN16
Design :2 ways
Body:Stainless Steel
Material ball :Stainless steel (1.4408)
Ball seal:PTFE
Face to Face length :EN 558-1-Reihe 27
Temperature range :Depending on the operating pressure / gas -20° to +60
Actuation : Electric Actuator
Max. Operating pressure :16 bar
Certificate :DVGW Gas DIN EN 13774, TA Luft
Option:24V, 230V, 240V, Full passage
Availability:In Stock
Tender
Kugelhahn KH123G, PN16-DN100 mit EL Antrieb • Flanschanschluss nach PN16 • Baulänge gemäß EN 558-1, R27 • Voller Durchgang • 2-teilig • Gekammerte Dichtung: Dichtsystem A • Gehäuse: 1.4408 • Kugel: 1.4408 • Flanschanschluss nach PN16 • Baulänge gemäß EN 558-1, R27 • Voller Durchgang • 2-teilig • Gekammerte Dichtung: Dichtsystem A • Gehäuse: 1.4408 • Kugel: 1.4408 • Dichtung Kugel: PTFE • Dichtung Spindel: FKM/PTFE • Dichtng Gehäuse: FKM/TFM • Temp. (min./max.): abhängig vom Betriebsdruck / Gas -20° bis +60° • Max. Betriebsdruck: 16 bar • Direkter Antriebsaufbau nach ISO 5211 • DVGW PN16 für Brenngase nach G260/1 • Zulassung nach DIN EN 13774 Betätigung: Elektroschwenkantrieb Typ: FG-J4C-S300 • Multivoltagesystem: 24 - 240V AC/DC, 50/60Hz • Laufzeit (90°): 58s ± 10% • Gehäuse: Polyamid (PA6) • Endlagenschalter: 2x SPST NO 5A 125V AC / 3A 250V AC • Handnotbetätigung • Elektronische Drehmomentbegrenzung • Automatische Schaltraumheizung
Gas flanged ball valve DN80 multivoltage electric actuatorConnection acc. to DIN PN16, face-to-face length acc. to EN558-1 series 14, full bore, 2-piece, ball seal PTFE, ball made of stainless steel(1.4404), body made of nodular cast iron(GGG40), approval DVGW for gas, TA-Luft with electric rotary actuator 90 degree -J4C S140, running time(90°) 34s ± 10%, 24V - 230V - 240V AC/DC
Stainless steel flanged ball valve DN 80, connection acc. to DIN PN16, face to face EN 558-1-series 14, ball seal made of TFM1600(PTFE), ball & body made of stainless steel (1.4408), approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with electric actuator (J4C S140), running time (90°): 34s ± 10%, 24V - 230V - 240V AC/DC
Disco check valve DN 80 spring loaded, intermediate flange connection PN6 up to 40 - ANSI150/300, Face to face acc. to EN 558-1- series 49, Body, disc made of stainless steel (1.4408 / 1.4581), spring made of stainless steel (1.4571), seat made of EPDM, With 4 earthing lugs, Max. Operating pressure 40 bar
Rubber expansion joint DN 80 with stainless steel flangeDIN PN10/16, Face to Face 130mm, EPDM nylon reinforced, Flange stainless steel, Max. working pressure 16 bar
Gate valve DN 80 PN16 drinking water gate valve, flanged bore acc. to EN 1092-2 - PN10/16, body & wedge made of EN-GJS-400-15 (GGG40) nodular cast iron, wedge EPDM coated, face-to-face dimensions acc. to EN 558-1, series 14, approval: DVGW drinking water with hand wheel
