Flange butterfly valve DN 50 PN10/16 NBR with hand lever
Lug type butterfly valve PN10/16, tight-closing, centrically mounted, body made of nodular cast iron GGG40 + epoxy 150µm, disc stainless steel (1.4408), seat ring NBR with hand lever
Nominal width :DN50 - 2'' inch
Connection :Flange PN10 , Flange PN16
Design :Lug
Body:Ductile Cast Iron (GGG40)
Face to Face length :EN558-1, Series 20
Sleeve material :NBR
Disc :Stainless steel
Temperature range :-10°C to +80°C
Actuation :Hand Lever
Max. Operating pressure :16 bar
Availability:In Stock
Tender
FERGO ball valve type Ball valve KH155-CS1TLF-DN15 PN40 with DA actuator Flange connection according to DIN PN16/40 Face-to-face: DIN EN 558-1 (basic series 14)/acc. to DIN 3202 F4 Full bore, 2-piece Body: 1.0619 steel (A216 WCB) Ball: 1.4301 stainless steel (A351 CF8) Shaft: AISI 304 Seal ball: TFM 1600 Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 40bar Approval: TA-Luft, Firesafe ATEX Ex II 2 GD c T3 SIL3 IEC 61508:2010 Actuation: Pneumatik-Antrieb DA1-20-AN-F04-C14 Design: Double-acting, 90° pivoting Housing: Aluminium, hard anodised Max. Operating pressure: 8 bar
Wafer butterfly valve DN 50, connection flanges PN10/16, body made of nodular cast iron GGG40, disc made of nodular cast iron GGG40 + Resicoat R4, seat ring made of NBR, approval: DVGW Gas with hand lever
Wafer-type electric butterfly valve DN 50Connection PN10/16/150lbs, body made of nodular cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of NBR, actuation electric rotary actuator, Running time (90°): 9s ± 10%, Multivoltage 24V - 230V - 240V AC/DC
Wafer type butterfly valve DN 50 EPDM electric actuator 24V - 240V AC/DC Connection PN10/16/150lbs, butterfly valve body made of nodular cast iron GGG40, butterfly valve disc made of stainless steel 1.4408, seat ring made of EPDM, with electric actuator J4C-S35, running time (90°): 9s ± 10%, Multivoltage 24V - 240V AC/DC
Wafer type butterfly valve DN 50 NBR double acting pneumatic actuatorWafer type butterfly valve DN 80 with pneumatic actuator, butterfly valve connection PN10/16/150lbs, butterfly valve body made of ductile iron GGG40, butterfly valve disc made of stainless steel (1.4408), seat ring made of NBR with pneumatic double acting quarter turn actuator 90 degrees, Max. Operating pressure 8 bar, Designed for 6 bar pilot pressure
Wafer butterfly valve DN 50 PN10/16 EPDM pneumatic actuator Connection PN10/16/150lbs, butterfly valve body made of spheroidal graphite cast iron GGG40, disc made of stainless steel (1.4408), seat ring made of EPDM with pneumatic single-acting quarter-turn actuator 90 degrees
Wafer butterfly valve DN 50 PN10/16 PTFE with EPDM coreWafer type butterfly valve DN 50, butterfly valve connection PN10/16/150lbs, butterfly valve body made of nodular cast iron GGG40, butterfly valve disc made of stainless steel (1.4408), seat ring PTFE with EPDM support ring, actuation with hand lever -other actuator on request
Wafer type butterfly valve DN 50 PN10/16 EPDM with hand leverButterfly valve connection PN10/16/150lbs, butterfly valve body made of ductile iron GGG40, butterfly valve disc made of stainless steel (1.4408), seat ring made of EPDM with hand lever (Al)
Wafer type butterfly valve DN 50 PN10/16 NBR pneumatic actuator Wafer type butterfly valve DN 80 with pneumatic actuator, butterfly valve connection PN10/16/150lbs, butterfly valve body made of ductile iron GGG40, butterfly valve disc made of stainless steel (1.4408), seat ring made of NBR with pneumatic single acting quarter turn actuator 90 degrees, Max. Operating pressure 8 bar, Designed for 6 bar pilot pressure
Wafer type butterfly valve DN 50 pneumatic actuatorWafer type butterfly valve DN 50 with actuator, butterfly valve connection PN10/16/150lbs, butterfly valve body made of ductile iron GGG40, butterfly valve disc made of stainless steel (1.4408), seat ring made of EPDM with pneumatic double acting quarter turn actuator 90 degrees, Max. Operating pressure 8 bar, Designed for 6 bar pilot pressure
Wafer butterfly valve DN 50 PN10/16 NBR with hand leverWafer type butterfly valve connection PN10/16/150lbs, tight-closing, centric bearing, body made of nodular cast iron GGG40, disc stainless steel (1.4408), seat ring NBR with hand lever
