Flanged ball valve DN 80, connection acc. to DIN PN16, face to face EN 558-1 series 14 (F4), ball seal TFM1600(PTFE), stainless steel ball, steel body (1.0619), approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 electric actuator (J4C S140), running time (90°): 34s ± 10%, 24V - 230V - 240V AC/DC
Nominal width :DN80 3'' inch
Connection :Flange PN10 , Flange PN16
Design :2 ways
Body:Steel
Material ball :Stainless steel (1.4301)
Ball seal:TFM 1600 (PTFE)
Face to Face length :EN 558-1 series 14
Actuation : Electric Actuator
Certificate :TA Luft, Fire Safe, AD2000-A4
Option:24V, 230V, 240V, Full passage
Availability:In Stock
Tender
Fergo ball valve type KH155-CS1TLF-DN80 PN16 with EL actuator Flange connection according to DIN PN16 Face-to-face: DIN EN 558-1 (basic series 14)/to DIN 3202 F4 Full bore, 2-piece Body: 1.0619 steel (A216 WCB) Ball: 1.4301 stainless steel (A351 CF8) Shaft: AISI 304 Seal ball: TFM 1600 Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 16bar Approval: TA-Luft, Firesafe ATEX Ex II 2 GD c T3 SIL3 IEC 61508:2010 Actuation: Electric rotary actuator Type: FG-J4C-S140 Multi-voltage system: 24 - 240V AC/DC, 50/60Hz Running time (90°): 34s ± 10% Housing: Polyamide (PA6) Limit switches: 2x SPST NO 5A 125V AC / 3A 250V AC Manual override Electronic torque limiter Automatic control room heating
Knife gate valve DN 65 PN10Double poppet design, seat ring made of EPDM with profile steel core reinforcement, body made of grey cast iron (GG25), gate plate & stem made of stainless steel, plate guide with integrated scraping effect, packing PTFE-Synt./EPDM/PTFE-Synt, operation handwheel with rising stem
Wafer type knife gate valve DN 65 PN10Design bi-directional, seat ring made of EPDM with profile steel core reinforcement, body made of grey cast iron (GG25), gate plate & stem made of stainless steel, plate guide with integrated scraping effect, packing PTFE-Synt./EPDM/PTFE-Synt. with quick closing lever steel painted
Wafer-type knife gate valve/flat knife gate valve DN 100 PN10, single-seated design, seat ring made of EPDM, body made of grey cast iron (GG25), knife gate valve plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305) with pneumatic double-acting actuator
Wafer-type knife gate valve/flat knife gate valve DN 250 PN10, single-seated design, seat ring made of NBR, body made of grey cast iron (GG25), gate plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305), actuation handwheel with rising stem
Wafer type butterfly valve DN 125 pneumatic actuatorWafer type butterfly valve DN 125 with spring closing actuator, connection PN10/16/150lbs, body made of ductile cast iron GGG40, disc made of stainless steel (1.4408), seat ring made of NBR with pneumatic single acting quarter turn actuator 90 degrees, Max. Operating pressure 8 bar
Wafer type stainless steel butterfly valve DN 50 with hand lever Butterfly valve connection PN10/16/150lbs, butterfly valve body & butterfly valve disc made of stainless steel (1.4408), seat ring made of EPDM with hand lever (Al)
Flanged butterfly valve DN 50, connection flanges PN10/16, body made of cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of EPDM, approval: DVGW for drinking water with gearbox
Wafer-type gas butterfly valve DN 25connection PN10/16, body made of nodular cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of NBR, approval DVGW Gas with hand lever (Al)
Vacuum resistant rubber expansion joint DN 80 Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150mm, Bellow EPDM, nylon cord reinforced, Flanges stainless steel, Max. working pressure 16 bar with vacuum support ring DN 80 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 65 for the pipeline Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150mm, Bellow EPDM, nylon cord reinforced, Flanges stainless steel, Max. working pressure 16 bar
Rubber expansion joint DN 125 for the pipeline, DIN PN10/16, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar
