Flanges according to DIN PN10/16,Design rubber expansion joint, Face to face: 150mm, Bellow EPDM, nylon cord reinforced, Flanges stainless steel, Max. working pressure 16 bar with vacuum support ring DN 80 with SS316 - The movement capacity is reduced by approx. 50%.
Nominal width :DN80 3'' inch
Vacuum ring :DN80, Stainless steel
Connection :Flange PN10 , Flange PN16
Design :Rubber compensator
Flange:Stainless Steel
Face to Face length :150mm
Material Bellow:EPDM
Temperature range :max. +110°C (depending on operating pressure)
Option:Vacuum support ring
Availability:In Stock
Tender
FERGO Expansion Joint OG150-SEF-DN80 with Vacuum ring
Face to face: 150 mm (6") Bellow: EPDM, nylon cord reinforced (colour code: red) Flanges: stainless steel SS316 Flanges ends acc. to DIN PN10/16 Max. working pressure: 16 bar Working temperature: max. +110°C (depending on working pressure) Vacuum ring DN80 for expansion joints OG150/OG130 Material: SS316 Restricts the range of movement by approx. 50 %
Flanged ball valve DN 100 PN10/16 in stainless steel Connection according to DIN PN16, face-to-face length EN 558-1-series 14 (F4), ball seal made of TFM1600(PTFE), ball & body made of stainless steel (1.4408), approval: TA-Luft, Firesafe, ATEX, AD2000-A4 with hand lever
Pneumatic flanged ball valve DN25, connection acc. to DIN PN16, face-to-face length acc. to EN558-1 series 14, ball seal PTFE & glass fibre, ball made of full stainless steel (1.4404), body made of spheroidal cast iron (GGG40), approval: TA-Luft, full bore, 2-piece with single-acting pneumatic quarter-turn actuator 90 degrees, SPRING FORCE CLOSING Normally Close (NC)
Gas flanged ball valve DN 65Connection acc. to DIN PN16, face-to-face length acc. to EN 558-1, R27, ball seal made of PTFE, seal stem FKM/PTFE, seal body FKM/TFM, ball made of stainless steel (1.4408) & body made of cast steel (1.0619), DVGW PN16 for fuel gases acc. to G260/1, approval acc. to DIN EN 13774
Flanged ball valve DN 80, connection acc. to DIN PN16, face to face EN 558-1 series 14 (F4), ball seal TFM1600(PTFE), stainless steel ball, steel body (1.0619), approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 electric actuator (J4C S140), running time (90°): 34s ± 10%, 24V - 230V - 240V AC/DC
Electric rotary actuator ball valve 1 1/4 inch DN 32, female thread connection acc. to ISO 228-1 F-F, body & ball stainless steel, sealing ball made of TFM 1600, approval TA-Luft, ATEX, AD2000-A4 with electric actuator (J4C S35), running time(90°) 9s ± 10%, multi voltage system 24V - 230V - 240V AC/DC
Stainless steel welding ends Ball valve acc. to ANSI B 16.25, body & ball stainless steel CF8M (1.4408), seal made of TFM 1600,full bore, 3-piece, Approval TA-Luft, ATEX, AD2000-A4 with hand lever
Stainless steel ball valve 1/2 inch - PN 63 to socket connection ISO 7-1(EN 10226-1) F-F, Body / ball / shaft made of /stainless steel (SS316)(CF8M), Seal made of PTFE + 15% glass fibre, full bore , 2 pieces, Max. Operating pressure 63 bar
Internal thread ball valve 3/8 inch acc. to ASME B1.20.1 NPT, Body made of stainless steel (1.4408)(CF8M), Ball made of stainless steel (1.4408)(CF8M), chrome plated, Seal ball made of PTFE+15% G.F, Max. Operating pressure 63 bar
Three-way ball valve with electric actuator DN 20 PN16/40 Design 3-way L Bore, full port, flanged ends acc. to DIN PN16/40, body & ball 1.4408 stainless steel, ball seal TFM 1600, temp. (min./max.) -29°C to +175°C, max. operating pressure 40 bar, TA Luft, ATEX, SIL with electric part-turn actuator 24V - 230V - 240V AC/DC
3-way ball valve 1 1/2 inch pneumaticL-bore, reduced bore, internal thread acc. to ISO 7-1 (EN 10226-1), body & ball made of 1.4408, sealing ball: PTFE + 15% GF, operating temperature -25°C to +180°C, max. operating pressure: 63 bar, Actuation Pneumatic single-acting actuator (Normally closed).
3-way flanged ball valve DN 80 with pneumatic actuatorL-bore full bore, flanged connection to DIN PN16, body made of cast steel 1.0619 WCB, ball made of 1.4308 (SS304) stainless steel, seal TFM 1600, temp. (min./max.) -29°C to +175°C, max. operating pressure 16 bar, TA Luft design, ATEX, with pneumatic quarter-turn actuator double-acting. Max. operating pressure 16 bar, TA Luft design, ATEX, with double-acting pneumatic quarter-turn actuator
Brass 3-way ball valve 1 1/4 inch, type L bore, internal thread to ISO 228 F-F-F, body made of brass, nickel-plated, ball made of brass, hard-chrome plated, seal made of PTFE, seal shaft: Viton, medium temp. (min./max.): -10°C to +120°C Not suitable for steam, Max. operating pressure: 35 bar, Manual lever operation
