Go to homepage
Filter products
Product configurator
KT103 3-way ball valve 1/4 inch stainless steel T-bore double acting pneumatic actuator
Product number
Copy to clipboard 102-1002-02-DA
Three-way ball valve 1/4 inch pneumatic actuatorT-bore design, reduced bore, internal thread to ISO 7-1 (EN 10226-1), body & ball made of 1.4408, ball seal: PTFE + 15% GF, Operating temperature -25°C to +180°C, Max. operating pressure: 63 bar, Actuation double-acting pneumatic actuator
Nominal width :
DN8- 1/4'' inch
Design :
3 ways
Body:
Stainless Steel
Bore:
T
Actuation :
Pneumatic Actuator
Price €116.06
€138.11 incl. VAT
Delivery Time: 2-7 Days
Available: In Stock
DVGW Gas Kugelhahn Innengewinde
KH101 Ball valve 3/8 inch female thread PN50 DVGW gas PTFE brass
Product number
Copy to clipboard 100-1004-03
Ball valve 3/8 inch female threadfemale thread acc. to ISO 7/1 Rp (F-F), Ball brass chrome plated,  Seal ballPTFE, O-ring Viton/NBR, Housing brass nickel plated for liquid and gaseous media, DVGW Gas Max. Operating pressure 50 bar
Nominal width :
DN10 - 3/8'' inch
Design :
2 ways
Body:
Brass
Actuation :
Hand Lever
Price €5.40
€6.43 incl. VAT
Delivery Time: 2-7 Days
Available: In Stock
KH156 Compact ball valve DN 150 PN16 stainless steel TA air Hand lever
Product number
Copy to clipboard 100-1610-14
Compact flanged ball valve DN 150, connection acc. to DIN PN16, overall length 225mm, ball seal made of TFM1600(PTFE), ball & body made of stainless steel (1.4408), approval: TA-Luft, Firesafe, ATEX, Fire Safe Design, AD2000-A4 with hand lever
Nominal width :
DN150 - 6'' inch
Design :
2 ways
Design :
Compact
Body:
Stainless Steel
Actuation :
Hand Lever
Price €1,642.75
€1,954.87 incl. VAT
Delivery Time: 2-7 Days
Available: In Stock
Flanschkugelhahn für gas Anwendung
KH122G Gas flanged ball valve DN 25 PN16 Cast steel DVGW Gas
Product number
Copy to clipboard 100-1070-06
Gas flanged ball valve DN 25Connection acc. to DIN PN16, face-to-face length acc. to EN 558-1, R27, ball seal made of PTFE, seal stem FKM/PTFE, seal body FKM/TFM, ball made of stainless steel (1.4408) & body made of cast steel (1.0619), DVGW PN16 for fuel gases acc. to G260/1, approval acc. to DIN EN 13774
Nominal width :
DN25 - 1'' inch
Design :
2 ways
Body:
Steel
Actuation :
Hand Lever
Price €200.86
€239.02 incl. VAT
Delivery Time: 2-7 Days
Available: In Stock
KH121 Gas flanged ball valve DN 50 PN16 DVGW gas ductile iron ball stainless steel
Product number
Copy to clipboard 100-1039-09
Flanged ball valve DN50 PN16 DVGW GasConnection acc. to DIN PN16, face-to-face length acc. to EN558-1 series 14 - F4, full bore, 2-piece, ball seal made of PTFE, ball made of stainless steel(1.4304), body made of nodular cast iron(GGG40), approval: DVGW for gas, TA-Luft with hand lever
Nominal width :
DN50 - 2'' inch
Design :
2 ways
Body:
Ductile Cast Iron (GGG40)
Actuation :
Hand Lever
Price €193.60
€230.38 incl. VAT
Delivery Time: 2-7 Days
Available: In Stock
KH124G Gas-ball-valve 1/2 inch PN16 DVGW-Gas stainless-steel
Product number
Copy to clipboard 100-1075-04
Gas ball valve 1/2 inch stainless-steel2-way ball valve for gas with DVGW gas approval according to DIN EN 13774. Full bore, 2-part design, with female threads according to DIN EN 10226-1 (ISO 7/1). The body and ball made of stainless-steel (1.4408), stem made of stainless steel (1.4401). Seals made of PTFE. Temperature range: -20°C to +60°C (depending on pressure), max. pressure: 16 bar. Top flange according to to ISO 5211, suitable for direct actuator mounting. Suitable for ATEX group 2, category 1 (2014-34-EU) with TA Luft certification (DIN EN ISO 15848). Actuation with a hand lever.
Nominal width :
DN15 - 1/2'' inch
Design :
2 ways
Body:
Stainless Steel
Actuation :
Hand Lever
Price €50.06
€59.57 incl. VAT
Delivery Time: 2-7 Days
Available: In Stock
KH124G Gas ball valve 1 1/4 inch DVGW-Gas electric 24V - 230V AC/DC
Product number
Copy to clipboard 100-1075-07-EL
Gas ball valve 1 1/4 inch electric 2-way stainless steel ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas equipment directive GAR EU-2016-426. Ideal for gas pipelines. The valve has a female thread connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (1.4408) and the shaft is made of stainless steel (1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, silicone-free. Actuated by an multi-voltage electric actuator 24V - 230V - 240V, with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Nominal width :
DN32 - 1 1/4'' inch
Design :
2 ways
Body:
Stainless Steel
Actuation :
Electric Actuator
Price €369.84
€440.11 incl. VAT
Delivery Time: 2-7 Days
Available: In Stock
Trinkwasser Kugelhähne mit elektrischem Antrieb
KH124W Ball valve 1 1/2 inch DVGW drinking water brass electric 24V - 230V AC/DC
Product number
Copy to clipboard 100-1077-08-EL
Drinking water ball valve 1 1/2 inch electric2-way brass ball valve with DVGW approval for drinking water in accordance with DIN EN 13828, operated by an electric actuator. Ideal for use in water/drinking water pipelines. The ball valve has a female thread connection in accordance with DIN EN 10226-1. The valve body is made of lead-free brass (CW724R), whereas the ball is made of stainless steel (1.4408). Full bore with PTFE seal. LABS conform according to VDMA 24364 & silicone-free. Actuated by an electric actuator with multi-voltage capability (24V - 230V - 240V AC/DC). The actuator has a run time (90°): 9s ± 10%. Upon request, the actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack/Fail-safe (NC/NO).
Nominal width :
DN40 - 1 1/2'' inch
Design :
2 ways
Body:
Brass
Actuation :
Electric Actuator
Price €305.18
€363.16 incl. VAT
Delivery Time: 2-7 Days
Available: In Stock
KH113 Stainless steel ball valve 1/2 inch female thread NPT
Product number
Copy to clipboard 100-2020-04
Female thread NPT ball valve 1/2“ in stainless steel Stainless steel ball valve with NPT female thread according to ASME B1.20.1 with robust two-piece design, full bore, and durable PTFE seat. With a pressure rating up to 63 bar and a temperature range from -25°C to +180°C, it is ideal for demanding applications in chemical processing, plant engineering, water treatment, and industrial systems. Manual operation with handlever or optionally with pneumatic or electric actuator according to ISO 5211.
Nominal width :
DN15 - 1/2'' inch
Design :
2 ways
Body:
Stainless Steel
Actuation :
Hand Lever
Price €18.52
€22.04 incl. VAT
Delivery Time: 2-7 Days
Available: In Stock
Messing Kugelhahn 2 Zoll 3 Zoll 4 Zoll
KH100 Threaded brass ball valve 1/4 inch handlever
Product number
Copy to clipboard 100-1000-02
Internal thread ball valve 1/4 inch ISO 228 F-F, Ball brass hard chrome plated, Seal ball PTFE, Seal shaft Viton (FPM/FKM), Body brass, nickel plated for liquid and gaseous media (not for steam!), Max. pressure 50 bar
Nominal width :
DN10 - 3/8'' inch
Design :
2 ways
Body:
Brass
Actuation :
Hand Lever
Price €4.58
€5.45 incl. VAT
Delivery Time: 2-7 Days
Available: In Stock
AKH2.2-Flowserve-Kugelhahn-PFA
Flowserve Atomac AKH2.2 PFA Ball Valve DN 40 PN10/16
Product number
Copy to clipboard 100-1100-08
PFA Ball Valve DN 40flanged connection acc. to DIN EN 1092-2-PN10/16, face to face acc. to EN558, series-1, ball seal PTFE, ball material cast steel 1.0619-PFA lined, body ductile iron GGG40.3-PFA, TA-Luft certificate with hand lever
Categories :
AKH2.2 - Ball Valve
Nominal width :
DN40 - 1 1/2'' inch
Design :
2 ways
Body:
Ductile Cast Iron(GGG40.3)+PFA
Actuation :
Hand Lever
Price €581.40
€691.87 incl. VAT
Delivery Time: 2-7 Days
Available: In Stock
KH155 Flanged ball valve DN 25 PN16/40 stainless steel single acting pneumatic actuator
Product number
Copy to clipboard 100-1113-06-SR
Stainless steel flanged ball valve DN 25, connection acc. to DIN PN16/40, face to face EN 558-1-series 14, ball seal made of TFM1600(PTFE), ball & body made of stainless steel (1.4408), approval: TA-Luft, Firesafe, ATEX, AD2000-A4 with single acting pneumatic actuator
Nominal width :
DN25 - 1'' inch
Design :
2 ways
Body:
Stainless Steel
Actuation :
Pneumatic Actuator
Price €265.57
€316.03 incl. VAT
Delivery Time: 2-7 Days
Available: In Stock
Pneumatic 2-way & 3-way ball valves made of stainless steel, brass, steel, and GGG40 – sizes DN15 to DN200 – certified according to DVGW, TA Luft, and fire safety standards for industrial use

Ball valve range in stock – 1,180 variants with fast EU delivery

A ball valve is the first choice when you need to shut off a pipeline quickly and reliably. FERGO is your supplier of industrial ball valves, from small threaded valves in DN8 to flanged valves in DN250. Standard models ship from stock. As a result, delivery across the EU usually takes 2–7 working days.

FERGO also supplies actuated valves as complete units. You therefore source the valve, actuator and accessories from one supplier and save coordination effort.

Controlling liquids and gases with a ball valve

Inside the valve sits a ball with a bore. When the bore lines up with the pipe, the medium flows almost unhindered. A 90° turn then rotates the ball and seals the passage tightly. That is why this design suits on/off duty so well. However, it is less suitable for fine flow control, because the seats wear faster in intermediate positions. For this task, we recommend our globe valves.

The table below shows which version suits your medium:

MediumRecommended versionMatching category
Drinking water and natural gasDVGW Drinking Water or WRAS · DVGW Gas to DIN EN 13774DVGW ball valves
Compressed air, cooling and process waterBrass or stainless steel with female threadThreaded ball valves
Hot water and steamStainless steel or steel, seat material to suit the temperatureFlanged, weld-end
Acids, alkalis and solventsStainless steel 1.4404, duplex 1.4470 or PFA liningSpecial materials, PFA-lined
Viscous or solidifying mediaVersion with heating jacket"Heating jacket" filter in the configurator
Low temperaturesBody in ASTM A350 LF2"Body" filter in the configurator

Before you order, check chemical compatibility with our resistance tool.

Choosing a ball valve by design and connection

The right design depends on the pipeline, nominal size and mode of operation. The table lists all nine subcategories with typical series:

VersionTypical useSeries (examples)
Threaded ball valve (female thread)Water, compressed air and heating in small sizesKH104 (brass), KH109 and KH113 (stainless steel)
Flanged ball valveProcess and distribution lines up to DN250KH155, KH156 (compact), KH120, KH121
Weld-end ball valvePermanently sealed lines in plant engineeringKH154 (three-piece, stainless steel)
3-way ball valveDiverting, distributing and mixingKL103, KL113, KL112 and KT112
Pneumatic ball valveAutomated plants with fast switching cyclesSingle- or double-acting
Electric ball valveRemote operation without compressed air24 V, 230 V or 240 V
DVGW ball valve (water and gas)Drinking water and gas linesKH123W, KH124W, KH121, KH122G, KH124G
Special materialsAggressive chemicals and chloride-bearing mediaDuplex 1.4470, ceramic balls
PFA-lined ball valveHighly corrosive mediaFlowserve Atomac AKH2, AKH2.2, AKH3
Flanged ball valve with pneumatic actuator, limit switch box, and NAMUR solenoid valves as custom solution for industrial pipelines

FERGO: the right ball valve for every pipeline

Three components determine how reliably a ball valve works: the body, the ball with its seats and the actuation.

The body

The body material sets the limits for medium, pressure and temperature. Brass, for example, suits water, compressed air and heating systems. Stainless steel such as 1.4408, 1.4401 or 1.4404 resists many chemicals. For chlorides and high pressures, duplex 1.4470 is the better choice. Steel and ductile iron (GGG40), on the other hand, cover large sizes economically. For low temperatures, ASTM A350 LF2 completes the range.

Ball and seats

Depending on the application, the ball consists of stainless steel (1.4408, 1.4404, 1.4401 or 1.4301), duplex, brass or ceramic. For aggressive media, FERGO also stocks PFA-lined valves from Flowserve Atomac. The seats mostly consist of PTFE, partly glass-fibre reinforced. This material resists chemicals very well and has low friction. As a result, the operating torque stays low.

Bore, port and connection

With a full bore, the opening in the ball matches the pipe cross-section. Pressure loss therefore stays minimal, and the line is easier to clean. A reduced bore, in contrast, saves weight and cost. On a 3-way valve, the bore defines the function: the L-bore diverts, while the T-bore distributes or mixes. Connections and face-to-face lengths follow common DIN, EN and ANSI standards such as EN 558-1:

FeatureOptions at FERGO
Nominal sizeDN8 to DN250 (¼" to 10")
FlangePN10, PN16, PN25, PN40, PN63, PN100 and ANSI Class 150
ThreadFemale thread to ISO 228-1 or ISO 7-1, NPT to ANSI, male/female thread
Weld endFor example series KH154
Face-to-face lengthEN 558-1 series 1 (F1), 14 (F4), 15 (F5) and 27 · ANSI B16.10 and B16.10 Short
Design2-way, 3-way and compact

Manual, pneumatic or electric

A hand lever is the simplest solution for valves you rarely operate. For large sizes, however, a gearbox makes operation easier. If your plant needs automatic control, choose a pneumatic actuator or the J4C electric actuator. The comparison helps you decide:

CriterionPneumaticElectric
EnergyCompressed airElectricity (24 V, 230 V or 240 V)
Switching timeVery shortLonger, depending on actuator size
Fail-safe positionSingle-acting with spring return, e.g. spring-closing (NC)Optional fail-safe module (BSR)
ControlVia NAMUR solenoid valveDirectly via the control voltage
Feedback and positioningLimit switch box, inductive sensor, positionerVersion with positioner
Typical useProcess plants with a compressed-air networkSites without compressed air, building services

If the valve sits in an insulated line, a stem extension creates the necessary clearance to the actuator. Matching flange gaskets also complete the installation.

Kugelhahn mit DVGW-, TA-Luft-, WRAS- und Fire-Safe-Zulassung – geprüfte Sicherheit für industrielle Rohrleitungen und Trinkwasseranwendungen

FERGO: multiple certifications and approvals

Certified valves simplify planning, acceptance and operation. Our range includes valves with the following approvals:

  • DVGW Gas to DIN EN 13774 – details from the DVGW (in German)
  • DVGW Drinking Water for potable water supply – details from the DVGW (in German)
  • WRAS – the UK approval for drinking water fittings, see WRAS Approvals
  • TA Luft for low-emission stem seals – background from the German Environment Agency
  • Fire Safe – the valve limits leakage even in a fire
  • SIL 3 for safety instrumented functions
  • AD 2000 Code A4 for valve bodies on pressure equipment

You can find all documents under Certificates. If you need a design outside the standard range, FERGO develops a custom solution.

Ball valve, butterfly valve or globe valve?

Not every task calls for a ball valve. The comparison shows when another valve fits better:

CriterionBall valveButterfly valveGlobe valve
Movement90° rotation90° rotationLinear stroke
Main taskShut-off (on/off)Shut-off, simple throttlingShut-off and control
Pressure loss (open)Very low with full boreLow, the disc stays in the flowHigher due to flow diversion
StrengthTight shut-off, fast switchingShort face-to-face, economical in large sizesFine flow control

For large sizes in tight spaces, a butterfly valve is often more economical. With solids in the medium, we recommend knife gate valves instead. For highly aggressive media, PFA-lined plug valves are another option. In addition, an upstream strainer protects the seats, while a check valve prevents backflow.

Not sure which valve you need? Then our team will gladly advise you via the contact form. You can also read more technical articles on the FERGO blog. Technical data for all series is also available on fergo.eu.