Stainless steel flanged ball valve DN 125, connection acc. to DIN PN16, face-to-face length EN 558-1-series 15, ball seal made of TFM1600(PTFE), ball & body made of stainless steel (1.4408), approval: TA-Luft, Firesafe, ATEX, AD2000-A4 with single acting pneumatic actuator
Nominal width :DN125 - 5'' inch
Connection :Flange PN10 , Flange PN16
Design :2 ways
Body:Stainless Steel
Material ball :Stainless steel (1.4408)
Ball seal:TFM 1600 (PTFE)
Face to Face length :EN 558-1 series 15
Temperature range :-29°C to +175°C
Actuation :Pneumatic Actuator
Max. Operating pressure :16 bar
Certificate :TA Luft, Fire Safe, AD2000-A4
Option:Single Acting , Full passage
Availability:In Stock
Tender
FERGO ball valve type Ball valve KH155-SSTLF-DN125 PN16 with SR actuator Flange connection according to DIN PN16 Face-to-face: DIN EN 558-1 (basic series 15)/acc. to DIN 3202 F5 Full bore, 2-piece Body: Stainless steel 1.4408 (A351 CF8M) Ball: Stainless steel 1.4408 (A351 CF8M) Shaft: Stainless steel 1.4408 (A351 CF8M) Seal ball: TFM 1600 (PTFE) Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 16bar Approval: TA-Luft, Firesafe ATEX Ex II 2 GD c T3 SIL3 IEC 61508:2010 Actuation: Pneumatik-Antrieb SR1-1200-AN-F10/F12-C36-NC Design: Single-acting, 90° pivoting spring force closing Housing: Aluminium, hard anodised Number of springs: 14 Max. Operating pressure: 8 bar
Wafer type butterfly valve DN 300 NBR pneumatic actuator Wafer type butterfly valve DN 300 with pneumatic actuator, butterfly valve connection PN10/16/150lbs, butterfly valve body made of ductile iron GGG40, butterfly valve disc made of stainless steel (1.4408), seat ring made of NBR with pneumatic double acting quarter turn actuator 90 degrees, Max. Operating pressure 8 bar, Designed for 6 bar supply pressure
Flanged butterfly valve DN 300, connection flanges PN10, tight-closing, centric bearing, body made of nodular cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of FPM/FKM (Viton) with gearbox handwheel
Intermediate flange PTFE lined butterfly valve DN 80, connection PN10/PN16/ANSI 150, body made of EN-GSJ-500-7 (GGG50) ductile cast iron, disc made of (CF8M) stainless steel, PFA + PTFE lined, seal made of PTFE with double acting pneumatic actuator
Electric butterfly valve DN 50 - Viton sealIntermediate flange connection PN10/16, housing made of ductile iron GGG40, valve disc made of stainless steel 1.4408, seat ring made of Viton FPM - FKM, with electric swing actuator J4C-S35, running time (90°): 9s ± 10%, multi-voltage 24V - 230V - 240V AC/DC
Knife gate valve DN 65 PN10 Wafer-type unidirectional design, body made of stainless steel CF8M(1.4408), seat ring made of EPDM, gate made of stainless steel SS316L (1.4404), stem made of stainless steel SS303 (1.4305), actuation: handwheel with rising stem
Wafer-type knife gate valve/flat knife gate valve DN 125 PN10, single-seated design, seat ring made of NBR, body made of grey cast iron (GG25), valve plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305) with pneumatic double acting
Flanged knife gate valve DN 100 PN10double-seated design, seat ring made of NBR with profile steel core reinforcement, body made of grey cast iron (GG25), valve plate & stem made of stainless steel, handwheel with non-rising stem
Knife gate valve DN 50 PN10double seated design, seat ring U-bolt seal NBR with profile steel core reinforcement, body made of grey cast iron (GG25), knife gate plate & stem made of stainless steel, knife gate guide with integrated scraping effect, packing PTFE-Synt./NBR/PTFE-Synt. with pneumatic double acting
Rubber expansion joint DN 65 for the pipeline Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Rubber expansion joint DN 125 with vacuum support ringDIN PN10/16, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 125 with SS316 - The movement capacity is reduced by approx. 50%.
Vacuum resistant rubber expansion joint DN 80 Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150mm, Bellow EPDM, nylon cord reinforced, Flanges stainless steel, Max. working pressure 16 bar with vacuum support ring DN 80 with SS316 - The movement capacity is reduced by approx. 50%.
