Rubber expansion joint DN 300 with vacuum support ring
DIN PN10, Face to Face 130mm, EPDM, nylon reinforced, Flanges galvanized steel, Max. working pressure 10 bar with vacuum support ring DN 300 with SS316 - The movement capacity is reduced by approx. 50%.
Nominal width :DN300 - 12'' inch
Vacuum ring :DN300, Stainless steel
Connection :Flange PN10
Design :Rubber compensator
Flange:Galvanised steel
Face to Face length :130mm
Material Bellow:EPDM
Temperature range :max. +110°C (depending on operating pressure)
Rubber expansion joint vacuum support ring DN 300 Flanges according to DIN PN10, Design rubber expansion joint, Face to face: 200 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 10 bar with vacuum support ring DN 300 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 300 for the pipeline Flanges according to DIN PN16, Design rubber expansion joint, Face to face: 200 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Rubber expansion joint vacuum support ring DN 300 Flanges according to DIN PN16, Design rubber expansion joint, Face to face: 200 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 300 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 150 stainless steel EPDMDIN PN10/16, Face to Face 130mm, EPDM, nylon reinforced, Flange stainless steel, Max. working pressure 16 bar
Rubber expansion joint DN 150 for the pipeline, DIN PN10/16, Face to Face 130mm, EPDM, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Sight glass Flange connection acc. to DIN 2501 PN16, Overall length acc. to EN588-1 Series-1, Housing made of stainless steel (1.4408)(CF8M), Glass made of pressed hard glass, Sealmade of PTFE, Pressure range 10/16 bar
Flowserve Atomac Sight Glass DN80 PFA LinedFlanged connection acc. to DIN EN 1092-2, PN16, Face to Face acc. to DIN EN 558, Series 1, Body Ductile Iron GGG40.3-PFA-ausgekleidet, Glas Borosilicate Glass acc. to DIN 7080, Max. operating pressure 16 bar
Stainless steel sight glass 1 inch Thread acc. to ISO 7-1 (EN 10226-1), F-F, body stainless steel (1.4408)(CF8M), tempered soda-lime glass , gasket PTFE, max. working pressure 16 bar
Flowserve Atomac Sight Glass DN25, Flanged connection acc. to DIN EN 1092-2, PN16, Face to Face acc. to DIN EN 558, Series 1, Body Ductile Iron GGG40.3-PFA-ausgekleidet, Glas Borosilicate Glass acc. to DIN 7080, Max. operating pressure 16 bar
Internal thread needle valve 3/8 inch stainless steelAcc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internal thread needle valve 1/2 inch stainless steel acc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internally threaded needle valve 1 1/4 inch stainless steelacc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internally threaded needle valve 1 1/2 inch stainless steelacc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
