Rubber expansion joint DN 150 with vacuum support ring
Flanges according to DIN PN10/16,Design rubber expansion joint, Face to face: 150 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 150 with SS316 - The movement capacity is reduced by approx. 50%.
Nominal width :DN150 - 6'' inch
Vacuum ring :DN150, Stainless steel
Connection :Flange PN10 , Flange PN16
Design :Rubber compensator
Flange:Galvanised steel
Face to Face length :150mm
Material Bellow:EPDM
Temperature range :max. +110°C (depending on operating pressure)
Option:Vacuum support ring
Availability:In Stock
Tender
FERGO Expansion Joint OG150-LEF-DN150 with Vacuum ring
Face to face: 150 mm (6") Bellow: EPDM, nylon cord reinforced (colour code: red) Flanges: Carbon steel Flanges ends acc. to DIN PN10/16 Max. working pressure: 16 bar Working temperature: max. +110°C (depending on working pressure) Vacuum ring DN150 for expansion joints OG150/OG130 Material: SS316 Restricts the range of movement by approx. 50 %
Stainless steel flanged ball valve DN 32, connection acc. to DIN PN16/40, face-to-face length EN 558-1-series 14 (F4), ball seal made of TFM1600(PTFE), ball & body made of stainless steel (1.4408), approval: TA-Luft, Firesafe, ATEX, AD2000-A4 with hand lever
Ball valve 1 inch female threadfemale thread acc. to ISO 7/1 Rp (F-F), Ball brass chrome-plated, Seal ballPTFE, O-ring Viton/NBR, Body brass nickel-plated for liquid and gaseous media, DVGW Gas Max. Operating pressure 25 bar
Compact flanged ball valve DN 40, connection acc. to DIN PN16, face-to-face length 65mm, ball seal made of TFM1600(PTFE), ball & body made of stainless steel (1.4408), approval: TA-Luft, Firesafe, ATEX, Fire Safe Design, AD2000-A4 with pneumatic single acting quarter turn actuator spring closing
Flanged ball valve DN 40, connection acc. to DIN PN16, face-to-face length acc. to EN558-1 series 14, ball seal PTFE + glass fibre, ball made of hollow stainless steel(1.4301), body made of nodular cast iron(GGG40), approval: TA-Luft with hand lever, full bore, 2-piece
Internal thread needle valve 3/8 inch stainless steelAcc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internally threaded needle valve 2 inch stainless steelacc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internally threaded needle valve 1 1/4 inch stainless steelacc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internally threaded needle valve 1 1/2 inch stainless steelacc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internal thread Y-Strainer 1 1/4 inchConnection acc. to ISO 228, body & cover made of brass, filter made of stainless steel 1.4301, mesh size Ø 500 µm(0.5mm), gaskets NBR, nominal pressure 20 bar, temp. min./max.: -20°C to +110°C
Internal thread Y strainer 3/8 inch Connection acc. to ISO 228, housing & cover made of brass, nickel plated, filter made of stainless steel 1.4301, mesh size Ø 500 µm(0.50mm), gaskets NBR, nominal pressure 20 bar, temp. min./max.: -20°C to +110°C
Flange Y strainer DN 40 steelFlange connection PN16-40, type B1, EN 1092-1, Construction length according to EN 558-1, series 1, Body/cover made of steel (1.0691) GS-C25 RAL 5015, strainer made of stainless steel (SS304), Mesh size Ø1 mm, Working temperature range -10°C to +400°C, approval AD2000 A4
Flange Y form strainer DN 15 stainless steel Flange acc. to DIN 2501 PN16, length acc. to EN 558-1, series 1, body/cover made of stainless steel (1.4408) shot-blasted, strainer filter made of stainless steel 1.4408, gaskets PTFE, mesh size Ø1 mm, working temperature range -30°C to +230°C
