Flanges according to DIN PN16,Design rubber expansion joint, Face to face: 150 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 200 with SS316 - The movement capacity is reduced by approx. 50%.
Nominal width :DN200 - 8'' inch
Vacuum ring :DN200, Stainless steel
Connection :Flange PN16
Design :Rubber compensator
Flange:Galvanised steel
Face to Face length :150mm
Material Bellow:EPDM
Temperature range :max. +110°C (depending on operating pressure)
Option:Vacuum support ring
Availability:In Stock
Tender
FERGO Expansion Joint OG150-LEF-DN200 with Vacuum ring
Face to face: 150 mm (6") Bellow: EPDM, nylon cord reinforced (colour code: red) Flanges: Carbon steel Flanges ends acc. to DIN PN16 Max. working pressure: 16 bar Working temperature: max. +110°C (depending on working pressure) Vacuum ring DN200 for expansion joints OG150/OG130 Material: SS316 Restricts the range of movement by approx. 50 %
Stainless steel flanged ball valve DN 25, connection acc. to DIN PN16/40, face-to-face length EN 558-1-series 14 (F4), ball seal made of TFM1600(PTFE), ball & body made of stainless steel (1.4408), approval: TA-Luft, Firesafe, ATEX, AD2000-A4 with hand lever
Compact ball valve DN 25 1 inch Connection acc. to ASME B 16.5 ANSI Cl.150, ball seal PTFE, ball made of stainless steel (1.4408) & body made of steel ASTM A105(1.0460), full bore, approval DVGW for gas, TA-Luft, Fire Safe with hand lever
Lug type butterfly valve DN 250 PN10 NBR with hand lever Flanged butterfly valve connection flanges PN10, tight-closing, centric bearing, body made of nodular cast iron GGG40 + epoxy 150µm, disc stainless steel (1.4408), seat ring NBR with hand lever
Wafer type butterfly valve DN 32, connection PN6/10/16/150lbs, body made of nodular cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of EPDM, approval: DVGW drinking water with hand lever (Al)
Flanged butterfly valve DN 125, connection flanges PN10/16, tight-closing, centric, body made of nodular cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of FPM/FKM (Viton) with gearbox handwheel
Wafer type butterfly valve DN 65 with hand lever Butterfly valve connection PN10/16/150lbs, butterfly valve body & butterfly valve disc made of stainless steel (1.4408), seat ring made of EPDM with hand lever
Knife gate valve DN 65 PN10 Wafer-type unidirectional design, body made of stainless steel CF8M(1.4408), seat ring made of EPDM, gate made of stainless steel SS316L (1.4404), stem made of stainless steel SS303 (1.4305), actuation: handwheel with rising stem
Wafer-type knife gate valve/flat knife gate valve DN 100 PN10single-seated design, seat ring made of metal, body made of grey cast iron (GG25), gate plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305), actuation handwheel with rising stem
Flanged knife gate valve DN 80 PN10Design bi-directional, seat ring made of NBR with profile steel core reinforcement, body made of grey cast iron (GG25), gate plate & stem made of stainless steel, handwheel with non-rising stem
Wafer type knife gate valve DN 150 PN10Design bi-directional | seat ring U-bolt seal NBR with profile steel core reinforcement, body made of grey cast iron (GG25), gate plate & stem made of stainless steel, plate guide with integrated scraping effect, packing PTFE-Synt./NBR/PTFE-Synt. | double-acting pneumatic actuator
