mounting between flanges DIN PN10/16, Face to Face 70mm, EPDM body, Flanges mild steel zinc plated(RST 37-2), Max. working pressure 10 bar
Attention! The pipe connectors have no movement properties compared to rubber expansion joints!
Nominal width :DN150 - 6'' inch
Connection :Flange PN10 , Flange PN16
Design :Rubber pipe connector
Flange:Galvanised steel
Face to Face length :70mm
Material Bellow:EPDM
Temperature range :max. +110°C (depending on operating pressure)
Availability:In Stock
Tender
Pipe connector SD100-LEF-DN150 for vibration absorption and noise reduction* Mounting between flanges DIN PN10/16 with tapped blind holes BSPP Face to face: 70 mm Body: EPDM Flanges: mild steel zinc plated (RST 37-2) Max. working pressure: 10 bar Working temperature: max. +110°C (depending on working pressure) * Attention! The pipe connectors have no movement properties compared to rubber expansion joints!
Rubber expansion joint DN 65 for the pipeline Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Rubber expansion joint DN 125 for the pipeline Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150 mm, Bellow NBR, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Rubber expansion joint DN 150 with vacuum support ringDIN PN10/16, Face to Face 130mm, EPDM, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 150 with SS316 - The movement capacity is reduced by approx. 50%.
Internal thread Y-Strainer 1 1/4 inchConnection acc. to ISO 228, body & cover made of brass, filter made of stainless steel 1.4301, mesh size Ø 500 µm(0.5mm), gaskets NBR, nominal pressure 20 bar, temp. min./max.: -20°C to +110°C
Flange Y type strainer DN 65 stainless steelFlange acc. to DIN 2501 PN16, length acc. to EN 558-1, series 1, body/cover stainless steel (1.4408) shot-blasted, strainer filter stainless steel 1.4408, gaskets PTFE, mesh size Ø2mm (other sizes on request), working temperature range -30°C to +230°C
Flange Y strainer DN 200 stainless steelFlange connection PN16, type B1, EN 1092-1, Overall length according to EN 558-1, series 1, Body/cover stainless steel (1.4408), strainer stainless steel (SS316), Mesh sizeØ1,6 mm, Working temperature range -40°C to +450°C, approval AD2000 A4
Flange Y strainer DN 80 made of steelFlange connection PN16/40, type B1, EN 1092-1, Face-to-face length according to EN 558-1, series 1, Body/cover made of steel (1.0691) GS-C25 RAL 5015, strainer made of stainless steel (SS304), Mesh size Ø1.25 mm, Working temperature range -10°C to +400°C, approval AD2000 A4
Internally threaded needle valve 1/4 inch stainless steelacc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internally threaded needle valve 3/4 inch stainless steelacc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internal thread needle valve 1/2 inch stainless steel acc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internally threaded needle valve 1 1/2 inch stainless steelacc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
