mounting between flanges DIN PN10, Face to Face 70mm, EPDM body, Flanges mild steel zinc plated (RST 37-2), Max. working pressure 10 bar
Attention! The pipe connectors have no movement properties compared to rubber expansion joints!
Nominal width :DN200 - 8'' inch
Connection :Flange PN10
Design :Rubber pipe connector
Flange:Galvanised steel
Face to Face length :70mm
Material Bellow:EPDM
Temperature range :max. +110°C (depending on operating pressure)
Availability:In Stock
Tender
Pipe connector SD100-LEF-DN200 for vibration absorption and noise reduction* Mounting between flanges DIN PN10 with tapped blind holes BSPP Face to face: 70 mm Body: EPDM Flanges: mild steel zinc plated (RST 37-2) Max. working pressure: 10 bar Working temperature: max. +110°C (depending on working pressure) * Attention! The pipe connectors have no movement properties compared to rubber expansion joints!
Disco check valve DN 200 spring loaded, intermediate flange PN10, PN16 and ANSI150, Face to face acc. to EN 558-1- series 49, Body, disc made of stainless steel (1.4408 / 1.4581), spring made of stainless steel (1.4571), seat EPDM, Max. Operating pressure 40 bar
Lift check valve DN 25 made of steelPiston check valve with nominal pressure: PN10/16/40, face-to-face dimension to EN 558-1, series 1, flange connection PN40 with type B1, EN 1092-1, body/cover made of steel 1.0619, disc made of 13Cr, spring made of stainless steel SSS304. Cover gasket made of SSS304 + graphite, operating temperature range -10°C to +400°C
Lift check valve DN 80 made of stainless steelPiston check valve with nominal pressure: PN40, face-to-face dimension to EN 558-1, series 1, flange connection PN10/16/40 with type B1, EN 1092-1, body/cover made of stainless steel 1.4408, disc made of F316, spring made of stainless steel SSS316. Cover gasket made of SSS304 + graphite, operating temperature range -10°C to +450°C
Internally threaded needle valve 1/4 inch stainless steelacc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internally threaded needle valve 3/4 inch stainless steelacc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internal thread needle valve 1/2 inch stainless steel acc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
Internally threaded needle valve 1 1/2 inch stainless steelacc. to ISO 7-1 (EN 10226-1), F-F, body: A182 F316 stainless steel, needle: A182 F6, shaft sealing made of PTFE + graphite, temperature range: -30°C to +260°C, nominal pressure: 205 bar / 3000 psi, actuation: Handwheel
GESTRA BK 45 1/2 inch butt-weldConnection: Butt-weld ends acc. to EN 12627, edge form ISO 9692-1, code number 1.3 (30° chamfer), Pipe size: 26,9 x 2,3mm, face-to-face length: 200mm, body, bonnet 1.0460/ASTM A105, gasket: graphite/CrNi, regulator with stainless steel duo steel plates, stainless steel internal parts
GESTRA UNA 45hl steam trap 2 1/2 inch Class 150Ball float steam trap with control unit DUPLEX, orifice (AO) 13, Installation between flanges ASME B 16.5, Class 150 RF, face-to-face dimension 292mm, body 1.0460/ASTM A105, cover 5.3103 (A395), gasket graphite/CrNi, stainless steel internal parts
GESTRA UNA 45hl steam trap 2 1/2 inch Class 300Ball float steam trap with control unit DUPLEX, orifice (AO) 13, Installation between flanges ASME B 16.5, Class 300 RF, face-to-face dimension 292mm, body 1.0460/ASTM A105, cover 5.3103 (A395), gasket graphite/CrNi, stainless steel internal parts
GESTRA MK 45-2 1 inch class 300 GESTRA Rhombusline thermostatic steam trap, With single seat standard capsule 5N2 for larger condensate flowrates, With Y-strainer and integrated water hammer protection, Installation between flanges ASME B 16.5, class300, Face-to-face dimension 160mm, Body and bonnet 1.0460 / ASTM A105, Sealing ring graphite/CrNi, Control diaphragm: Hastelloy®, Internal parts: Stainless steels
GESTRA UNA 45hl DN 65 steam trap DuplexFloat steam trap with control unit DUPLEX, orifice (AO) 32, Installation between flanges EN 1092-1 PN40 form B1, face-to-face dimension 290mm, body 1.0460/ASTM A105, cover 5.3103 (A395), gasket graphite/CrNi, stainless steel internal parts
