mounting between flanges DIN PN10/16, Face to Face 70mm, EPDM body, Flanges mild steel zinc plated(RST 37-2), Max. working pressure 10 bar
Attention! The pipe connectors have no movement properties compared to rubber expansion joints!
Nominal width :DN25 - 1'' inch
Connection :Flange PN10 , Flange PN16
Design :Rubber pipe connector
Flange:Galvanised steel
Face to Face length :70mm
Material Bellow:EPDM
Temperature range :max. +110°C (depending on operating pressure)
Availability:In Stock
Tender
Pipe connector SD100-LEF-DN25 for vibration absorption and noise reduction* Mounting between flanges DIN PN10/16 with tapped blind holes BSPP Face to face: 70 mm Body: EPDM Flanges: mild steel zinc plated (RST 37-2) Max. working pressure: 10 bar Working temperature: max. +110°C (depending on working pressure) * Attention! The pipe connectors have no movement properties compared to rubber expansion joints!
Rubber expansion joint DN 65 for the pipeline Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Rubber expansion joint DN 125 for the pipeline Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150 mm, Bellow NBR, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Rubber expansion joint DN 150 with vacuum support ringDIN PN10/16, Face to Face 130mm, EPDM, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 150 with SS316 - The movement capacity is reduced by approx. 50%.
Wafer-type knife gate valve/flat knife gate valve DN 100 PN10, single-seated design, seat ring made of EPDM, body made of grey cast iron (GG25), knife gate valve plate made of stainless steel SS304L (1.4306), stem made of stainless steel SS303 (1.4305) with pneumatic double-acting actuator
Wafer-type knife gate valve DN 80 PN10 Single-seated design, seat ring made of NBR, body made of stainless steel CF8M(1.4408), slide plate made of stainless steel SS316L (1.4404), stem made of stainless steel SS303 (1.4305) with pneumatic double acting
Knife gate valve DN 80 PN10 made of GG25Design bi-directional, seat ring made of NBR with profile steel core reinforcement, body made of grey cast iron (GG25), gate plate & stem made of stainless steel, plate guide with integrated scraping effect, packing PTFE-Synt./NBR/PTFE-Synt. with quick closing lever steel painted
Wafer type knife gate valve DN 250 PN10Single-seated design, seat ring made of NBR, body made of stainless steel CF8M(1.4408), gate plate made of stainless steel SS316L (1.4404) , stem made of stainless steel SS303 (1.4305), actuation handwheel with rising stem
Sight glass flange connection acc. to DIN 2501 PN16, face to face acc. to EN588-1 series-1, body made of stainless steel (1.4408)(CF8M), glass made of pressed hard glass, gasket made of PTFE, pressure range 10/16 bar
Stainless steel sight glass 3/4 inch female thread acc. to ISO 7-1 (EN 10226-1), F-F, body stainless steel (1.4408)(CF8M), glass soda lime hard glass, gasket PTFE, Max. Operating pressure 16 bar
Sight glass flange connection acc. to DIN 2501 PN16, face to face acc. to EN588-1 series-1, body made of stainless steel (1.4408)(CF8M), glass made of pressed hard glass, gasket made of PTFE, pressure range 10/16 bar
Stainless steel sight glass 1 inch Thread acc. to ISO 7-1 (EN 10226-1), F-F, body stainless steel (1.4408)(CF8M), tempered soda-lime glass , gasket PTFE, max. working pressure 16 bar
