mounting between flanges DIN PN10/16, Face to Face 70mm, EPDM body, Flanges mild steel zinc plated(RST 37-2), Max. working pressure 10 bar
Attention! The pipe connectors have no movement properties compared to rubber expansion joints!
Nominal width :DN50 - 2'' inch
Connection :Flange PN10 , Flange PN16
Design :Rubber pipe connector
Flange:Galvanised steel
Face to Face length :70mm
Material Bellow:EPDM
Temperature range :max. +110°C (depending on operating pressure)
Availability:In Stock
Tender
Pipe connector SD100-LEF-DN50 for vibration absorption and noise reduction* Mounting between flanges DIN PN10/16 with tapped blind holes BSPP Face to face: 70 mm Body: EPDM Flanges: mild steel zinc plated (RST 37-2) Max. working pressure: 10 bar Working temperature: max. +110°C (depending on working pressure) * Attention! The pipe connectors have no movement properties compared to rubber expansion joints!
Flanged ball valve DN 65, connection acc. to DIN PN10/16, face to face EN 558-1 series 1 (F1), ball seal made of TFM1600(PTFE), body made of steel(1.0619), ball made of stainless steel, approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with hand lever
Compact flanged ball valve DN 15, connection acc. to DIN PN10/16, length 42mm, ball seal made of TFM1600(PTFE), ball & body made of stainless steel (1.4408), approval: TA-Luft, Firesafe, ATEX, Fire Safe Design, AD2000-A4 with hand lever
3-way ball valve 1/4 inch pneumaticType L-bore, reduced bore, internal thread acc. to ISO 7-1 (EN 10226-1), body & ball made of 1.4408, seal ball: PTFE + 15% GF, Operating temperature -25°C to +180°C, Max. operating pressure: 63 bar, Actuation Pneumatic single-acting actuator (Normally closed).
Electric 3 way ball valve DN 50 PN16/40 T bore, full bore, flange connection acc. to DIN PN16/40, body & ball made of 1.4408 stainless steel, gasket TFM 1600, temp. (min./max.) -29°C to +175°C, max. Operating pressure 40 bar, TA Luft design, ATEX with Electric actuator 24V - 230V - 240V AC/DC
