DP32001 3/2-way throttle plate allows for precise adjustment of the opening and closing speed of single-acting pneumatic actuators. These double-block throttles are installed between the single-acting actuator and the 3/2-way pilot valve. Adjustment is done using screwdriver available on both sides. With NAMUR 1/4" interface, connection Ø 5 mm, max. flow rate 650 l/min and operating pressure from 0.5 to 10 bar. Supplied with mounting screws.
• Between single-acting quarter turn actuator and 3/2-way pilot valve • Operation with screwdriver, adjustable on both sides • NAMUR 1/4" • Connection 5mm • Max. flow rate: 650 l/min • Operating pressure: 0,5 to 10 bar • Incl. fasteners 2x DIN 912 M5x46 and 1x DIN 913 M5x10
Flanged ball valve DN 20, connection acc. to DIN PN16/40, face to face EN 558-1 series 1 (F1), ball seal made of TFM1600(PTFE), body made of steel(1.0619), ball made of stainless steel, approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with pneumatic actuator single acting
Flanged butterfly valve DN 125 for water, Connection flanges PN10/16, body made of spheroidal graphite cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of EPDM, DVGW approval for drinking water with pneumatic single-acting quarter-turn actuator (Normally closed).
Lug butterfly valve DN 250 EPDM single acting pneumatic actuatorFlanged butterfly valve DN 250 with single acting pneumatic actuator, butterfly valve connection PN10/16, butterfly valve body made of nodular cast iron GGG40, butterfly valve disc made of stainless steel (1.4408), seat ring made of EPDM with pneumatic single-acting quarter-turn actuator 90 degrees, Max. Operating pressure 8 bar, Designed for 6 bar pilot pressure
Three-way ball valve DN25 PN16/40 pneumatic single acting actuator T-bore design, full bore, flanged connection to DIN PN16/40, body & ball made of 1.4408 stainless steel, gasket TFM 1600, temp. (min./max.) -29°C up to +175°C, max. Operating pressure 40 bar, TA Luft design, ATEX with pneumatic single acting actuator (Normally closed)
Three-way ball valve DN 100 PN16 with pneumatic single-acting actuator Design 3-way L Bore, full port, flanged ends acc. to DIN PN16, body & ball 1.4408 stainless steel, ball seal TFM 1600, temp. (min./max.) -29°C to +175°C, max. operating pressure 40 bar, TA Luft, ATEX, SIL with pneumatic single-acting actuator (Normally Closed)
