Thermostatic steam trap GESTRA RHOMBUSline, With single seat, standard capsule 5N2 for larger condensate flowrates, With Y-type strainer and integrated water hammer protection, Installation between flanges ASME B 16.5, Class150 RF, Face-to-face dimension 150mm, Body and bonnet 1.4404 / ASTM A182 F316L, Sealing ring graphite/CrNi, Control diaphragm: Hastelloy®, Internal parts: Stainless steel
Categories :MK 45A-2
Internal parts:Stainless steel
Nominal width :DN15 - 1/2'' inch
Connection :Flange ANSI Class150
Body:Stainless Steel
Face to Face length :150mm
Temperature range :max. 450°C
Tender
Steam trap GESTRA MK 45A-2, Class150, 1/2" Thermostatic steam trap GESTRA RHOMBUSline With single seat, standard capsule 5N2 for larger condensate flowrates With Y-type strainer and integrated water hammer protection Installation between flanges ASME B 16.5, Class150 RF Face to face: 150mm Body and cover: 1.4404 / ASTM A182 F316L Gasket: Graphite/CrNi Membrane regulator capsule: Hastelloy® Other internals: high-grade steels
Bellow sealed valve DN 15 PN40Flange connection PN40 acc. to EN 1092-1, Face-to-face length acc. to EN 558-1, Series 1, Tightness class A acc. to EN 12266-1, Bellows: X6CrNiMoTi17-12-2, Body made of Body made of 1.0619 (GP240GH), Plug made of 1.4021 (X20Cr13 + QT), Valve seat made of stainless steel, Packing rings: Graphite, Nominal pressure 40bar, Max. Temperature: +450°C (depending on operating pressure), Kvs: 6 m³/h, TA Luft acc. to ISO 15848-1 & actuation (steel) handwheel
Stainless steel flanged shut-off valve DN 15Flange connection acc. to EN 1092-1 form B1, Face to face acc. to EN 558-1, series 1, Body & cover stainless steel 1.4408 (CF8M), Gland packing graphite (TA Luft), Body gasket: SS304 + graphite (TA Luft), Max. Operating temperature: 400°C, Actuation handwheel (rising stem), Approval AD2000, NACE, PED2014/68/EU, TA Luft
Gestra RK76 disco check valve DN 80wafer type check valve for mounting between flanges PN6/10/16/25/40, ASME Class 125/150/300, face-to-face dimensions according to EN 558-1- series 49, body made of chromium steel (1.4107), disc made of stainless steel (1.4571), spring made of stainless steel (1.4571), metal seated, Nominal pressure: PN40/CL300 [see pressure-temperature table].
Gestra RK44 disco check valve DN 15Wafer type check valve for mounting between flanges PN6/10/16 und ASME Class 125, face-to-face dimensions according to EN 558-1- series 49, Body, seat, guide ribs: bronze CC480K-GS, Valve disc, spring, spring retainer: 1.4571, Spiral ring: 1.4310, metal-seated, Nominal pressure: 16 bar [see pressure-temperature table].
Gestra RK44 disco check valve DN 20Wafer type check valve for mounting between flanges PN6/10/16 und ASME Class 125, face-to-face dimensions according to EN 558-1- series 49, Body, seat, guide ribs: bronze CC480K-GS, Valve disc, spring, spring retainer: 1.4571, Spiral ring: 1.4310, metal-seated, Nominal pressure: 16 bar [see pressure-temperature table].
Gestra RK44 disco check valve DN 25Wafer type check valve for mounting between flanges PN6/10/16 und ASME Class 125, face-to-face dimensions according to EN 558-1- series 49, Body, seat, guide ribs: bronze CC480K-GS, Valve disc, spring, spring retainer: 1.4571, Spiral ring: 1.4310, metal-seated, Nominal pressure: 16 bar [see pressure-temperature table].
Gestra RK44 disco check valve DN 32Wafer type check valve for mounting between flanges PN6/10/16 und ASME Class 125, face-to-face dimensions according to EN 558-1- series 49, Body, seat, guide ribs: bronze CC480K-GS, Valve disc, spring, spring retainer: 1.4571, Spiral ring: 1.4310, metal-seated, Nominal pressure: 16 bar [see pressure-temperature table].
Gestra RK44 disco check valve DN 40Wafer type check valve for mounting between flanges PN6/10/16 und ASME Class 125, face-to-face dimensions according to EN 558-1- series 49, Body, seat, guide ribs: bronze CC480K-GS, Valve disc, spring, spring retainer: 1.4571, Spiral ring: 1.4310, metal-seated, Nominal pressure: 16 bar [see pressure-temperature table].
Gestra RK44 disco check valve DN 50Wafer type check valve for mounting between flanges PN6/10/16 und ASME Class 125, face-to-face dimensions according to EN 558-1- series 49, Body, seat, guide ribs: bronze CC480K-GS, Valve disc, spring, spring retainer: 1.4571, Spiral ring: 1.4310, metal-seated, Nominal pressure: 16 bar [see pressure-temperature table].
Gestra RK44 disco check valve DN 65Wafer type check valve for mounting between flanges PN6/10/16 und ASME Class 125, face-to-face dimensions according to EN 558-1- series 49, Body, seat, guide ribs: bronze CC480K-GS, Valve disc, spring, spring retainer: 1.4571, Spiral ring: 1.4310, metal-seated, Nominal pressure: 16 bar [see pressure-temperature table].
Gestra RK44 disco check valve DN 80Wafer type check valve for mounting between flanges PN6/10/16 und ASME Class 125, face-to-face dimensions according to EN 558-1- series 49, Body, seat, guide ribs: bronze CC480K-GS, Valve disc, spring, spring retainer: 1.4571, Spiral ring: 1.4310, metal-seated, Nominal pressure: 16 bar [see pressure-temperature table].
Gestra RK44 disco check valve DN 100Wafer type check valve for mounting between flanges PN6/10/16 und ASME Class 125, face-to-face dimensions according to EN 558-1- series 49, Body, seat, guide ribs: bronze CC480K-GS, Valve disc, spring, spring retainer: 1.4571, Spiral ring: 1.4310, metal-seated, Nominal pressure: 16 bar [see pressure-temperature table].
Gestra RK44 disco check valve DN 125Wafer type check valve for mounting between flanges PN6/10/16 und ASME Class 125/150, face-to-face dimensions according to EN 558-1- series 49, Body, seat: grey cast iron 5.1301, Valve disc, spindle guide: bronze CC480K-GS, Spring: stainless steel 1.4571, metal-seated, Nominal pressure: 16 bar [see pressure-temperature table].
Gestra RK44 disco check valve DN 150Wafer type check valve for mounting between flanges PN6/10/16 und ASME Class 125/150, face-to-face dimensions according to EN 558-1- series 49, Body, seat: grey cast iron 5.1301, Valve disc, spindle guide: bronze CC480K-GS, Spring: stainless steel 1.4571, metal-seated, Nominal pressure: 16 bar [see pressure-temperature table].
Gestra RK44 disco check valve DN 200Wafer type check valve for mounting between flanges PN6/10/16 und ASME Class 125/150, face-to-face dimensions according to EN 558-1- series 49, Body, seat: grey cast iron 5.1301, Valve disc, spindle guide: bronze CC480K-GS, Spring: stainless steel 1.4571, metal-seated, Nominal pressure: 16 bar [see pressure-temperature table].
Gestra RKE86 vacuum breaker/non-return valve DN 15The RKE86 wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of chrome steel 1.4317 and the valve disc as well as the spring are made of stainless steel 1.4571.
Gestra RKE86 vacuum breaker/non-return valve DN 20The RKE86 wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of chrome steel 1.4317 and the valve disc as well as the spring are made of stainless steel 1.4571.
Gestra RKE86 vacuum breaker/non-return valve DN 25The RKE86 wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of chrome steel 1.4317 and the valve disc as well as the spring are made of stainless steel 1.4571.
Gestra RKE86 vacuum breaker/non-return valve DN 32The RKE86 wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of chrome steel 1.4317 and the valve disc as well as the spring are made of stainless steel 1.4571.
Gestra RKE86 vacuum breaker/non-return valve DN 40The RKE86 wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of chrome steel 1.4317 and the valve disc as well as the spring are made of stainless steel 1.4571.
Gestra RKE86 vacuum breaker/non-return valve DN 50The RKE86 wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of chrome steel 1.4317 and the valve disc as well as the spring are made of stainless steel 1.4571.
Gestra RKE86 vacuum breaker/non-return valve DN 65The RKE86 wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of chrome steel 1.4317 and the valve disc as well as the spring are made of stainless steel 1.4571.
Gestra RKE86 vacuum breaker/non-return valve DN 80The RKE86 wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of chrome steel 1.4317 and the valve disc as well as the spring are made of stainless steel 1.4571.
Gestra RKE86 vacuum breaker/non-return valve DN 100The RKE86 wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of chrome steel 1.4317 and the valve disc as well as the spring are made of stainless steel 1.4571.
Gestra RKE86A vacuum breaker/non-return valve DN 15The RKE86A wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of stainless steel 1.4408 and the valve disc as well as the spring are made of stainless steel 1.4571
Gestra RKE86A vacuum breaker/non-return valve DN 20The RKE86A wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of stainless steel 1.4408 and the valve disc as well as the spring are made of stainless steel 1.4571.
Gestra RKE86A vacuum breaker/non-return valve DN 25The RKE86A wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of stainless steel 1.4408 and the valve disc as well as the spring are made of stainless steel 1.4571.
Gestra RKE86A vacuum breaker/non-return valve DN 32The RKE86A wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of stainless steel 1.4408 and the valve disc as well as the spring are made of stainless steel 1.4571.
Gestra RKE86A vacuum breaker/non-return valve DN 40The RKE86A wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of stainless steel 1.4408 and the valve disc as well as the spring are made of stainless steel 1.4571.
Gestra RKE86A vacuum breaker/non-return valve DN 50The RKE86A wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of stainless steel 1.4408 and the valve disc as well as the spring are made of stainless steel 1.4571.
Gestra RKE86A vacuum breaker/non-return valve DN 65The RKE86A wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of stainless steel 1.4408 and the valve disc as well as the spring are made of stainless steel 1.4571.
Gestra RKE86A vacuum breaker/non-return valve DN 80The RKE86A wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of stainless steel 1.4408 and the valve disc as well as the spring are made of stainless steel 1.4571.
Gestra RKE86A vacuum breaker/non-return valve DN 100The RKE86A wafer non-return valve is also suitable as a vacuum breaker valve to prevent unwanted backflow and protect systems against negative pressure. The vacuum vent valve is suitable for installation between flanges PN10-40 and ASME Class 125/150/300 and has a short face to face length acc. to EN 558, Series 49. The metal-seated valve has the body made of stainless steel 1.4408 and the valve disc as well as the spring are made of stainless steel 1.4571.
GESTRA RK86 check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. The robust chrome steel body 1.4317, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
GESTRA RK86A check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. Stainless steel body 1.4408, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
GESTRA RK86 check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. The robust chrome steel body 1.4317, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
GESTRA RK86 check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. The robust chrome steel body 1.4317, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
GESTRA RK86 check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. The robust chrome steel body 1.4317, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
GESTRA RK86 check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. The robust chrome steel body 1.4317, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
GESTRA RK86 check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. The robust chrome steel body 1.4317, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
GESTRA RK86 check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. The robust chrome steel body 1.4317, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
GESTRA RK86 check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. The robust chrome steel body 1.4317, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
GESTRA RK86 check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. The robust chrome steel body 1.4317, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
GESTRA RK86A check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. Stainless steel body 1.4408, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
GESTRA RK86A check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. Stainless steel body 1.4408, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
GESTRA RK86A check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. Stainless steel body 1.4408, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
GESTRA RK86A check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. Stainless steel body 1.4408, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
GESTRA RK86A check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. Stainless steel body 1.4408, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
GESTRA RK86A check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. Stainless steel body 1.4408, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
GESTRA RK86A check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. Stainless steel body 1.4408, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
GESTRA RK86A check valve is equipped with self-centering valve bodies and patented centering cams that enable easy and cost-effective installation. Suitable for installation between PN 10/16/25/40 and ASME Class 125/150/300 and face-to-face length according to EN 558, Series 49. Stainless steel body 1.4408, stainless steel disc 1.4571 and EPDM seat ensure reliable sealing as well as a long service life that is ideal for liquids, gases, and steam in industrial applications.
Gestra RK76 disco check valve DN 25wafer type check valve for mounting between flanges PN6/10/16/25/40, ASME Class 125/150/300, face-to-face dimensions according to EN 558-1- series 49, body made of chromium steel (1.4107), disc made of stainless steel (1.4571), spring made of stainless steel (1.4571), metal seated, Nominal pressure: PN40/CL300 [see pressure-temperature table].
Gestra RK76 disco check valve DN 50wafer type check valve for mounting between flanges PN6/10/16/25/40, ASME Class 125/150/300, face-to-face dimensions according to EN 558-1- series 49, body made of chromium steel (1.4107), disc made of stainless steel (1.4571), spring made of stainless steel (1.4571), metal seated, Nominal pressure: PN40/CL300 [see pressure-temperature table].
Gestra RK76 disco check valve DN 65wafer type check valve for mounting between flanges PN6/10/16/25/40, ASME Class 125/150/300, face-to-face dimensions according to EN 558-1- series 49, body made of chromium steel (1.4107), disc made of stainless steel (1.4571), spring made of stainless steel (1.4571), metal seated, Nominal pressure: PN40/CL300 [see pressure-temperature table].
Gestra RK76 disco check valve DN 32wafer type check valve for mounting between flanges PN6/10/16/25/40, ASME Class 125/150/300, face-to-face dimensions according to EN 558-1- series 49, body made of chromium steel (1.4107), disc made of stainless steel (1.4571), spring made of stainless steel (1.4571), metal seated, Nominal pressure: PN40/CL300 [see pressure-temperature table].
Gestra RK76 disco check valve DN 40wafer type check valve for mounting between flanges PN6/10/16/25/40, ASME Class 125/150/300, face-to-face dimensions according to EN 558-1- series 49, body made of chromium steel (1.4107), disc made of stainless steel (1.4571), spring made of stainless steel (1.4571), metal seated, Nominal pressure: PN40/CL300 [see pressure-temperature table].
Gestra RK76 disco check valve DN 100wafer type check valve for mounting between flanges PN6/10/16/25/40, ASME Class 125/150/300, face-to-face dimensions according to EN 558-1- series 49, body made of chromium steel (1.4107), disc made of stainless steel (1.4571), spring made of stainless steel (1.4571), metal seated, Nominal pressure: PN40/CL300 [see pressure-temperature table].
Gestra RK76 disco check valve DN 20wafer type check valve for mounting between flanges PN6/10/16/25/40, ASME Class 125/150/300, face-to-face dimensions according to EN 558-1- series 49, body made of chromium steel (1.4107), disc made of stainless steel (1.4571), spring made of stainless steel (1.4571), metal seated, Nominal pressure: PN40/CL300 [see pressure-temperature table].
Gestra RK76 disco check valve DN 15wafer type check valve for mounting between flanges PN6/10/16/25/40, ASME Class 125/150/300, face-to-face dimensions according to EN 558-1- series 49, body made of chromium steel (1.4107), disc made of stainless steel (1.4571), spring made of stainless steel (1.4571), metal seated, Nominal pressure: PN40/CL300 [see pressure-temperature table].
Gestra RK86 disco check valve DN 15intermediate flange PN10 up to 40 ANSI150/300, face-to-face dimensions according to EN 558-1- series 49, body made of chromium steel (1.4317), disc made of stainless steel (1.4571), spring made of stainless steel (1.4571), seat made of metal, Max. Operating pressure 40 bar
Disco check valve DN 15, intermediate flange PN16/40 ANSI150, face to face acc. to EN 558-1- series 49, body, disc & spring in stainless steel (SS316/CF8M), seat in metallic, Max. Operating pressure 40 bar
Lift check valve DN 15 made of stainless steelPiston check valve with nominal pressure: PN40, face-to-face dimension to EN 558-1, series 1, flange connection PN10/16/40 with type B1, EN 1092-1, body/cover made of stainless steel 1.4408, disc made of F316, spring made of stainless steel SSS316. Cover gasket made of SSS304 + graphite, operating temperature range -10°C to +450°C
Flanged ball valve DN 15 1/2'' inch ANSI 150 Flange connection acc. to ASME B16.5 Class150 RF, Face to face acc. to ASME B16.10, Ball seal made of TFM1600(PTFE), Ball & body made of stainless steel (1.4408), Approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with hand lever
Flanged ball valve DN 20 3/4'' inch ANSI 150 Flanged connection acc. to ASME B16.5 Class150 RF, Face to face acc. to ASME B16.10, Ball seal made of TFM1600(PTFE), Ball & body made of stainless steel (1.4408), Approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with hand lever
