Stainless steel weld end ball valve acc. to ANSI B 16.25, body & ball stainless steel CF8M (1.4408), gasket ball TFM 1600, approval TA-Air, ATEX, AD2000-A4 with pneumatic actuator single acting(SR), spring return closing
Nominal width :DN15 - 1/2'' inch
Connection :Weld-on
Design :2 ways
Body:Stainless Steel
Material ball :Stainless steel (1.4408)
Ball seal:TFM 1600 (PTFE)
Temperature range :-29°C to +175°C
Actuation :Pneumatic Actuator
Max. Operating pressure :63 bar
Certificate :TA Luft, AD2000-A4
Option:Single Acting , Spring Force Closing(NC) , Full passage
Availability:In Stock
Tender
Fergo ball valve type KH154-SSTHB-1/2" with SR actuator Weld ends according to ANSI B 16.25 Full bore 3-piece Body: Stainless steel CF8M (1.4408) Threaded ends: Stainless steel CF8M (1.4408) Ball: Stainless steel CF8M (1.4408) Seal ball: TFM 1600 (PTFE) Temp. (min./max.): -29°C to +175°C Max. Operating pressure: 63bar Direct actuator design according to ISO 5211 Approval: TA-Luft ATEX: II 2G Ex h IIB T3 Gb / II 2D Ex h IIIC T180°C Db SIL3 IEC 61508:2010 Actuation: Pneumatik-Antrieb SR1-40-AN-F04-C14-NC Design: Single-acting, 90° pivoting spring force closing Housing: Aluminium, hard anodised Number of springs: 14 Max. Operating pressure: 8 bar
Stainless steel weld end ball valve 1/2 in. acc. to ANSI B 16.25, body & ball stainless steel CF8M (1.4408), gasket TFM 1600,full bore, 3 pieces, Approval TA-Luft, ATEX, AD2000-A4 with hand lever
3-piece Stainless steel ball valve 1/2 inch DN 15 - Socket ball valve - Female thread connection acc. to ISO 228-1 F-F, Body & ball stainless steel CF8M (1.4408), Seal ball TFM 1600, Full bore, 3-piece, Approval TA-Luft, ATEX, AD2000-A4 with hand lever
Flanged ball valve DN 15 1/2'' inch ANSI 150 Flange connection acc. to ASME B16.5 Class150 RF, Face to face acc. to ASME B16.10, Ball seal made of TFM1600(PTFE), Ball & body made of stainless steel (1.4408), Approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with hand lever
