2-way pneumatic ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas appliance regulation GAR EU-2016-426. Ideal for gas pipelines with gases according to G260, argon, hydrogen, biogases according to G262, and acetylene. The valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.-1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, antistatic design & silicone-free. Suitable for Ex area, group 2 category 1 Atex 2014-34-EU. LABS conform to VDMA 24364. Actuated by a single-acting pneumatic actuator (spring return/normally closed). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Nominal width :DN40 - 1 1/2'' inch
Connection :Female thread
Design :2 ways
Body:Stainless Steel
Material ball :Stainless steel (1.4408)
Ball seal:PTFE
Temperature range :Depending on the operating pressure / gas -20° to +60
Actuation :Pneumatic Actuator
Max. Operating pressure :16 bar
Certificate :DVGW Gas DIN EN 13774, TA Luft
Option:Single Acting , Spring Force Closing(NC) , Full passage
Availability:In Stock
Tender
Kugelhahn KH124G, 1 1/2" mit SR Antrieb • Bauform: 2-Wege • Voller Durchgang • 2-teilig • Innengewinde Rp nach DIN EN 10226-1 (ISO 7/1) • Gehäuse / Kugel: 1.4408 • Schaltwelle: 1.4401 • Kugeldichtung: PTFE • Schaltwellendichtung: PTFE tellerfedervorgespannt • Temperaturbereich: -20°C...+60°C (abhängig vom Betriebsdruck) • Betriebsdruck: 16 bar • Antriebsmontage direkt nach DIN ISO 5211 • DVGW Gas Zulassung PN16 nach DIN EN 13774 • DVGW Zulassung nach Gasgeräteverordnung GAR EU-2016-426 • Ex-Bereich: Gruppe 2, Kategorie 1 ATEX 2014-34-EU Betätigung: • Pneumatik-Antrieb SR1-130-AN-F05/F07-C17-NC • Bauform: Einfachwirkend, 90° schwenkend • Gehäuse: Aluminium, harteloxiert • Anzahl d. Federn: 6 • Max. Betriebsdruck: 8 bar WICHTIG! Antriebskalkulation für Steuerdruck 6 bar!
Limit switch box EB300-PE2M02 with mechnical micro switchesFlexible box made of polyamide with polycarbonate cover, Mounting bracket and shaft made of stainless steel, Voltage: 12-250 V AC/DC, Operating current: 0,1-10A with protection IP67
3/2 way Namur solenoid valve with air springPneumatic solenoid valve 3/2 way G 1/4" with Al anodised frame, inner parts of brass and synthetic material with NBR sealing, Operating pressure of 1.5 to 10 bar with protection class IP65 including solenoid coil and plug
DP32001 3/2-way throttle plate allows for precise adjustment of the opening and closing speed of single-acting pneumatic actuators. These double-block throttles are installed between the single-acting actuator and the 3/2-way pilot valve. Adjustment is done using screwdriver available on both sides. With NAMUR 1/4" interface, connection Ø 5 mm, max. flow rate 650 l/min and operating pressure from 0.5 to 10 bar. Supplied with mounting screws.
DP52001 5/2-way throttle plate allows for precise adjustment of the opening and closing speed of double-acting pneumatic actuators. These double-block throttles are installed between the double-acting actuator and the 5/2-way pilot valve. Adjustment is done using screwdriver available on both sides. With NAMUR 1/4" interface, connection Ø 5 mm, max. flow rate 650 l/min and operating pressure from 0.5 to 10 bar. Supplied with mounting screws.
3/2 way Namur solenoid valve with air springPneumatic solenoid valve 3/2 way G 1/4" with Al anodised frame, inner parts of brass and synthetic material with NBR sealing, Operating pressure of 1.5 to 10 bar with protection class IP65 including solenoid coil and plug
Stainless steel socket check valve 1 1/2 inch, connection female thread ISO 228/1, body, disc & spring made of stainless steel (1.4301), seat made of Viton, Max. Operating pressure 16 bar, Temp.max 150°C
Stainless steel ball valve 1 1/2'' inch PN 63 female thread acc. to ISO 7-1(EN 10226-1) F-F, Body / ball / shaft made of stainless steel (SS316)(CF8M), Seal made of ball PTFE + 15% glass fibre, Full bore , 2 pieces Max. Operating pressure 63 bar with single-acting pneumatic actuator
