Rubber expansion joint DN 150 with vacuum support ring
DIN PN10/16, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 barwith vacuum support ring DN 150 with SS316 - The movement capacity is reduced by approx. 50%.
Nominal width :DN150 - 6'' inch
Vacuum ring :DN150, Stainless steel
Connection :Flange PN10 , Flange PN16
Design :Rubber compensator
Flange:Galvanised steel
Face to Face length :130mm
Material Bellow:NBR
Temperature range : max. +90°C (depending on operating pressure)
Rubber expansion joint DN 150 with vacuum support ringDIN PN10/16, Face to Face 130mm, EPDM, nylon reinforced, Flanges stainless steel, Max. working pressure 16 bar with vacuum support ring DN 150 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 150 with vacuum support ringDIN PN10/16, Face to Face 130mm, EPDM, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 150 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 150 for the pipeline Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Rubber expansion joint DN 200 for the pipeline Flanges according to DIN PN16, Design rubber expansion joint, Face to face: 150 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 200 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 150 stainless steel EPDMDIN PN10/16, Face to Face 130mm, EPDM, nylon reinforced, Flange stainless steel, Max. working pressure 16 bar
Rubber expansion joint DN 150 for the pipeline, DIN PN10/16, Face to Face 130mm, EPDM, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Stainless steel gate valve DN100 PN16 Stainless steel, flanged connection acc. to EN 1092-1 form B1, face-to-face length acc. to EN 558-1, series 14, body & cover Stainless steel (1.4408), wedge made of stainless steel(1.4408), with screwed cover and external stem thread, design according to EN 1984, Approval: AD2000, NACE, TA Luft, Max. Max. operating pressure 16 bar, Max. Operating temp. 450°C
Brass gate valve 3/4 inch - Gate valve for water pipesfemale thread Gate valve 3/4 inch, threaded connection ISO 228 female thread, Body brass CW617N, Wedge brass CW617N, Seat seal metallic, Working pressure: 16 bar/232psi, Handwheel made of steel
Drinking water gate valve DN 250 PN10 for water pipe, flanged bore acc. to EN 1092-2 - PN10, body & wedge made of EN-GJS-400-15 (GGG40) nodular cast iron, wedge EPDM coated, face to face acc. to EN 558-1, series 14, approval: DVGW drinking water with handwheel
Stainless steel flanged shut-off valve DN 100 PN16Flange connection acc. to EN 1092-1 form B1, Face to face acc. to EN 558-1, series 1, Body & cover stainless steel 1.4408 (CF8M), Gland packing graphite (TA Luft), Body gasket: SS304 + graphite (TA Luft), Max. Operating temperature: 400°C, Actuation handwheel (rising stem), Approval AD2000, NACE, PED2014/68/EU, TA Luft
Flanged shut-off valve DN 65Flange connection acc. to EN 1092-1 form B1, Face to face acc. to EN 558-1, series 1, Body & cover made of steel 1.0619, Packing gland graphite (TA Luft), Body gasket: SS304 + graphite (TA Luft), Max. Operating temperature: 400°C, Actuation handwheel (rising stem), Approval AD2000, NACE, PED2014/68/EU, TA Luft
Flanged shut-off valve DN 50 PN40 with gland packing sealFlange connection PN40 acc. to EN 1092-1, face-to-face length acc. to EN 558-1, series 1, tightness class A acc. to EN 12266-1, body made of steel 1.0619 (GP240GH), plug made of 1.4021 (X20Cr13), valve seat made of stainless steel, gland packing graphite, body gasket: SS304 + graphite, nominal pressure 40bar, Max. Temperature: +450°C (depending on operating pressure), Kvs: 47 m³/h, Actuation handwheel (EN-GJS-400-18-LT)
