mounting between flanges DIN PN10/16, Face to Face 70mm, EPDM body, Flanges mild steel zinc plated(RST 37-2), Max. working pressure 10 bar
Attention! The pipe connectors have no movement properties compared to rubber expansion joints!
Nominal width :DN100 - 4'' inch
Connection :Flange PN10 , Flange PN16
Design :Rubber pipe connector
Flange:Galvanised steel
Face to Face length :70mm
Material Bellow:EPDM
Temperature range :max. +110°C (depending on operating pressure)
Availability:In Stock
Tender
Pipe connector SD100-LEF-DN100 for vibration absorption and noise reduction* Mounting between flanges DIN PN10/16 with tapped blind holes BSPP Face to face: 70 mm Body: EPDM Flanges: mild steel zinc plated (RST 37-2) Max. working pressure: 10 bar Working temperature: max. +110°C (depending on working pressure) * Attention! The pipe connectors have no movement properties compared to rubber expansion joints!
Rubber expansion joint DN 32 stainless steel DIN PN10/16, Face to Face 130mm, EPDM nylon reinforced, Flange Stainless steel, Max. working pressure 16 bar
Rubber expansion joint DN 50 for the pipeline Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150 mm, Bellow NBR, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Vacuum resistant rubber expansion joint DN 80 Flanges according to DIN PN10/16, Design rubber expansion joint, Face to face: 150mm, Bellow EPDM, nylon cord reinforced, Flanges stainless steel, Max. working pressure 16 bar with vacuum support ring DN 80 with SS316 - The movement capacity is reduced by approx. 50%.
Compact flanged ball valve DN 32, connection acc. to DIN PN16, face-to-face length 42mm, ball seal made of TFM1600(PTFE), ball & body made of steel, approval: TA-Luft, Firesafe, ATEX, Fire Safe Design, AD2000-A4 with pneumatic double acting quarter turn actuator
Flanged ball valve DN 65, connection acc. to DIN PN10/16, face to face EN 558-1 series 1 (F1), ball seal made of TFM1600(PTFE), body made of steel(1.0619), ball made of stainless steel, approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with hand lever
Internal thread ball valve 1 1/2 inch according to ISO 228 F-F, Ball brass, hard chrome plated, Sealball PTFE, Sealshaft Viton (FPM/FKM), Body brass, nickel plated for liquid and gaseous media, Max. Operating pressure 30 bar
Nominal width :
DN40 - 1 1/2'' inch
Design :
2 ways
Connection :
Female thread
Body:
Brass
Ball seal:
PTFE
Temperature range :
Air: -20°C to +150°C Water: 0°C to +150°C Gas: -20°C to +60°C
Compact ball valve 1 inch, connection acc. to ASME B16.5 ANSI Cl.150, ball seal made of PTFE, ball & body made of stainless steel (1.4408), full bore, approval: DVGW for gas, TA-Luft, Fire Safe with hand lever
Wafer type butterfly valve DN 50, connection PN6/10/16/150lbs, body made of nodular cast iron GGG40, disc stainless steel 1.4408, seat ring NBR, DVGW gas with pneumatic quarter-turn actuator single acting
Stainless steel butterfly valve DN 200 with hand leverLug butterfly valve connection PN10, butterfly valve body & disc made of stainless steel (1.4408), seat ring made of EPDM, temp. (min. max.) -10°C to +120°C with hand lever
Flanged butterfly valve DN 80 PN10/16 NBR with hand leverLug type butterfly valve connection PN10/16, tight-closing, centric bearing, body made of nodular cast iron GGG40 + epoxy 150µm, disc stainless steel (1.4408), seat ring NBR with hand lever
Butterfly valve DN 80 for water, connection flanges PN10/16, body made of nodular cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of EPDM, approval: DVGW for drinking water with hand lever (Al)
