connection PN6/10/16/150lbs, body made of nodular cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of EPDM - approval DVGW drinking water with gearbox
Wafer type butterfly valve DN 50 connection PN6/10/16/150lbs, body ductile iron GGG40, disc stainless steel 1.4408, seat ring EPDM, DVGW drinking water with electric quarter-turn actuator J4C-S35, running time (90°): 9s ± 10%, multivoltage 24V - 230V - 240V AC/DC
Wafer type butterfly valve DN 50, connection PN6/10/16/150lbs, body made of ductile cast iron GGG40, disc made of stainless steel 1.4408, seat ring EPDM DVGW drinking water with pneumatic quarter-turn actuator single acting
Wafer type butterfly valve DN 50, connection PN6/10/16/150lbs, body made of nodular cast iron GGG40, disc stainless steel 1.4408, seat ring made of EPDM, approval DVGW drinking water with pneumatic quarter-turn actuator double acting
Double-eccentric butterfly valve DN 50Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 65Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 80Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 100Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 125Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 50Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
Double-eccentric butterfly valve DN 65Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
Double-eccentric butterfly valve DN 80Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
Double-eccentric butterfly valve DN 100Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
Double-eccentric butterfly valve DN 125Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
Double-eccentric butterfly valve DN 150Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 200Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 250Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 300Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 150Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
Double-eccentric butterfly valve DN 200Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
Double-eccentric butterfly valve DN 250Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
Double-eccentric butterfly valve DN 300Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install a heat sink from 225°C.
Double-eccentric butterfly valve DN 50 stainless-steelDouble-offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 65 stainless-steelDouble-offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 80 stainless-steelDouble-offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 100 stainless-steelDouble-offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 125 stainless-steelDouble-offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber), Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 50 stainless-steelDouble offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install a heat sink from 225°C.
Double-eccentric butterfly valve DN 65 stainless-steelDouble offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install a heat sink from 225°C.
Double-eccentric butterfly valve DN 80 stainless-steelDouble offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install a heat sink from 225°C.
Double-eccentric butterfly valve DN 100 stainless-steelDouble offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install a heat sink from 225°C.
Double-eccentric butterfly valve DN 125 stainless-steelDouble offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install a heat sink from 225°C.
Wafer type butterfly valve DN 50, connection PN6/10/16/150lbs, body made of ductile cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of EPDM, approval: DVGW drinking water with hand lever (Al)
