Rubber expansion joint DN 200 for vaccum application
Flanges according to DIN PN10,Design rubber expansion joint, Face to face: 150 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 10 bar with vacuum support ring DN 200 with SS316 - The movement capacity is reduced by approx. 50%.
Nominal width :DN200 - 8'' inch
Vacuum ring :DN200, Stainless steel
Connection :Flange PN10
Design :Rubber compensator
Flange:Galvanised steel
Face to Face length :150mm
Material Bellow:EPDM
Temperature range :max. +110°C (depending on operating pressure)
Option:Vacuum support ring
Availability:In Stock
Tender
FERGO Expansion Joint OG150-LEF-DN200 with Vacuum ring
Face to face: 150 mm (6") Bellow: EPDM, nylon cord reinforced (colour code: red) Flanges: Carbon steel Flanges ends acc. to DIN PN10 Max. working pressure: 10 bar Working temperature: max. +110°C (depending on working pressure) Vacuum ring DN200 for expansion joints OG150/OG130 Material: SS316 Restricts the range of movement by approx. 50 %
Flanged ball valve DN 65, connection acc. to DIN PN10/16, face to face EN 558-1 series 1 (F1), ball seal made of TFM1600(PTFE), body made of steel(1.0619), ball made of stainless steel, approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with hand lever
Flanged ball valve DN 100 hand leverConnection acc. to DIN PN10/16, face to face EN 558-1 series 1 (F1), ball seal made of TFM1600(PTFE), body made of steel(1.0619), the ball made of stainless steel, approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with Hand lever
Flanged ball valve DN 150, connection acc. to DIN PN16, face-to-face length acc. to EN558-1 series 14, ball seal PTFE + glass fibre, ball made of hollow stainless steel (1.4301), ball valve body made of spheroidal graphite cast iron (GGG40), approval: TA-Luft with hand lever, full bore, 2-piece
Gas flanged ball valve DN80 PN16, connection acc. to DIN PN16, face-to-face length acc. to EN558-1 series 14 - F4, ball seal made of PTFE, ball made of hollow stainless steel(1.4301), ball valve body made of nodular cast iron(GGG40), approval: DVGW for gas, TA-Luft with hand lever, full bore, 2-piece
Wafer type butterfly valve DN 80 PN10/16Wafer butterfly valve connection PN10/16/150lbs, body made of nodular cast iron GGG40, disc stainless steel (1.4408), seat ring NBR with hand lever
Flanged butterfly valve DN 150, connection flanges PN10/16, body made of nodular cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of EPDM with gearbox - handwheel
Lug butterfly valve DN 125 PN10/16 with hand leverButterfly valve connection PN10/16, butterfly valve body & disc made of stainless steel (1.4408), seat ring made of EPDM, temp. (min. max.) -10°C to +120°C with hand lever (Al)
Double-eccentric butterfly valve DN 50Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 65Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 80Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 100Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 125Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 50Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
Double-eccentric butterfly valve DN 65Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
Double-eccentric butterfly valve DN 80Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
Double-eccentric butterfly valve DN 100Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
Double-eccentric butterfly valve DN 125Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
Double-eccentric butterfly valve DN 150Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 200Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 250Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 300Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 150Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
Double-eccentric butterfly valve DN 200Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
Double-eccentric butterfly valve DN 250Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install heat sink from 225°C.
Double-eccentric butterfly valve DN 300Double offset type, WAFER type for installation between flanges PN10, PN16, ANSI 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A216 WCB, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: Gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install a heat sink from 225°C.
Double-eccentric butterfly valve DN 50 stainless-steelDouble-offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 65 stainless-steelDouble-offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 80 stainless-steelDouble-offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 100 stainless-steelDouble-offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber) , Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 125 stainless-steelDouble-offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate A, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: RPTFE (PTFE + 25% glass fiber), Packing: PTFE, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +220°C, Operation: gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc.
Double-eccentric butterfly valve DN 50 stainless-steelDouble offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install a heat sink from 225°C.
Double-eccentric butterfly valve DN 65 stainless-steelDouble offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install a heat sink from 225°C.
Double-eccentric butterfly valve DN 80 stainless-steelDouble offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install a heat sink from 225°C.
Double-eccentric butterfly valve DN 100 stainless-steelDouble offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (Metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: hand lever (SS316), TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install a heat sink from 225°C.
Double-eccentric butterfly valve DN 125 stainless-steelDouble offset design, WAFER type for installation between flanges PN10, PN16, ANSI Class 150, Face to face acc. to EN 558-1, Line 20; ISO 5752 Series 20, Tightness acc. to Class VI / ISO 5208, Rate AA, Actuator connection: ISO 5211, Body: ASTM A351 CF8M, Disc: ASTM A351 CF8M, Shaft: ASTM A276 F316, Seat: INCONEL 718 (metal-seated), Packing: Graphite, Max. working pressure: ≤25 bar, Temp. (min./max.): -29°C to +360°C(*), Operation: gearbox, TA Luft approval (ISO 15848), ATEX acc. to 2014/34/EU - Atex II 2GDc. (*) It is recommended to install a heat sink from 225°C.
Wafer type butterfly valve DN 50, connection PN6/10/16/150lbs, body made of ductile cast iron GGG40, disc made of stainless steel 1.4408, seat ring made of EPDM, approval: DVGW drinking water with hand lever (Al)
Knife gate valve DN 50 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 50 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 65 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 80 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 100 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 125 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 150 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 200 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 250 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 300 PN10 EPDMKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the EPDM seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 65 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 80 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 100 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 125 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 150 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 200 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 250 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 300 PN10 NBRKnife gate valve in stainless steel with one-piece intermediate flange body is single-seated and designed for installation between PN10 flanges. CF8M (1.4408) body, SS316L (1.4404) gate plate, and SS303 (1.4305) stem ensure high corrosion resistance, while the NBR seat ring and quick-closing lever provide reliable sealing making it ideal for industrial applications involving liquids or slurries.
Knife gate valve DN 50 PN10 Wafer-type unidirectional design, body made of stainless steel CF8M(1.4408), seat ring made of EPDM, gate made of stainless steel SS316L (1.4404), stem made of stainless steel SS303 (1.4305), actuation: handwheel with rising stem
Knife gate valve pneumatic DN 50 PN10 Unidirectional design, Wafer body made of stainless steel CF8M (1.4408), gate made of stainless steel SS316L (1.4404), stem made of stainless steel SS303 (1.4305), seat ring made of EPDM, with pneumatic double-acting actuator
Flanged knife gate valve DN 80 PN10Design bi-directional, seat ring made of NBR with profile steel core reinforcement, body made of grey cast iron (GG25), gate plate & stem made of stainless steel, handwheel with non-rising stem
Knife gate valve DN 50 PN10double seated design, seat ring U-bolt seal NBR with profile steel core reinforcement, body made of grey cast iron (GG25), knife gate plate & stem made of stainless steel, knife gate guide with integrated scraping effect, packing PTFE-Synt./NBR/PTFE-Synt. with pneumatic double acting
