Rubber expansion joint DN 250 for vacuum application
Flanges according to DIN PN16,Design rubber expansion joint, Face to face: 200 mm, Bellow EPDM, nylon cord reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 250 with SS316 - The movement capacity is reduced by approx. 50%.
Nominal width :DN250 - 10'' inch
Vacuum ring :DN250, Stainless steel
Connection :Flange PN16
Design :Rubber compensator
Flange:Galvanised steel
Face to Face length :200mm
Material Bellow:EPDM
Temperature range :max. +110°C (depending on operating pressure)
Option:Vacuum support ring
Availability:In Stock
Tender
FERGO Expansion Joint OG150-LEF-DN250-PN16 with Vacuum ring
Face to face: 200 mm (8") Bellow: EPDM, nylon cord reinforced (colour code: red) Flanges: Carbon steel Flanges ends acc. to DIN PN16 Max. working pressure: 16 bar Working temperature: max. +110°C (depending on working pressure) Vacuum ring DN50 for expansion joints OG150/OG130 Material: SS316 Restricts the range of movement by approx. 50 %
Rubber expansion joint DN 250 for the pipeline, DIN PN10, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 10 bar
Rubber expansion joint DN 250 with vacuum support ring DIN PN10, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 10 bar with vacuum support ring DN 250 with SS316 - The movement capacity is reduced by approx. 50%.
Stainless steel rubber expansion joint DN 250 EPDM DIN PN10, Face to Face 130mm, EPDM, nylon reinforced, Stainless steel flange, Max. working pressure 10 bar
Rubber expansion joint DN 250 with vacuum support wireDIN PN10, Face to Face 130mm, EPDM, nylon reinforced, Flanges stainless steel, Max. working pressure 10 bar with vacuum support ring DN 250 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 250 with vacuum support wireDIN PN10, Face to Face 130mm, EPDM, nylon reinforced, Flanges galvanized steel, Max. working pressure 10 bar with vacuum support ring DN 250 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 250 for the pipeline, DIN PN10, Face to Face 130mm, EPDM, nylon reinforced, Flanges galvanized steel, Max. working pressure 10 bar
Rubber expansion joint DN 250 with vacuum support ring DIN PN16, Face to Face 130mm, EPDM, nylon reinforced, Flanges stainless steel, Max. working pressure 16 bar with vacuum support ring DN 250 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 250 for the pipeline, DIN PN16, Face to Face 130mm, EPDM, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Rubber expansion joint DN 250 with vacuum support ring DIN PN16, Face to Face 130mm, EPDM, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 250 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 250 with vacuum support ringDIN PN16, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar with vacuum support ring DN 250 with SS316 - The movement capacity is reduced by approx. 50%.
Rubber expansion joint DN 250 for the pipeline, DIN PN16, Face to Face 130mm, nitrile/CR-NBR, nylon reinforced, Flanges galvanized steel, Max. working pressure 16 bar
Flanged ball valve DN 25, connection acc. to DIN PN16/40, face to face EN 558-1 series-1 (F1), ball seal TFM1600(PTFE), ball & body made of stainless steel(1.4408), approval TA-Luft, Firesafe Design, ATEX, AD2000-A4 with hand lever
Stainless steel flanged ball valve DN 50, connection acc. to DIN PN16/40, face-to-face length EN 558-1-series 14 (F4), ball seal made of TFM1600(PTFE), ball & body made of stainless steel (1.4408), approval: TA-Luft, Firesafe, ATEX, AD2000-A4 with hand lever
Flanged ball valve DN 65, connection acc. to DIN PN10/16, face to face EN 558-1 series 1 (F1), ball seal made of TFM1600(PTFE), body made of steel(1.0619), ball made of stainless steel, approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with hand lever
Flanged ball valve DN 80, connection acc. to DIN PN40, face to face EN 558-1 series 14 (F4), ball seal made of TFM1600(PTFE), body made of steel(1.0619), ball made of stainless steel, approval: TA-Luft, Firesafe Design, ATEX, AD2000-A4 with hand lever
GESTRA BK 45 3/4 inch ASME B 16.5 class 300Installation between flanges ASME B 16.5, class 300 RF, Face to face: 150mm, body & bonnet 1.0460/ASTM A105, gasket: graphite/CrNi, regulator with stainless steel duo steel plates, stainless steel internal parts
GESTRA BK 15 2 inch ASME B 16.5 class 300Thermostatic steam trap with bimetallic regulator, installation between flanges ASME B 16.5, class 150 RF , face-to-face: 230mm, body, bonnet 1.0460/ASTM A105, body gasket graphite, Thermovit regulator stainless steel/dual steel, internal parts stainless steel with integrated strainer and non-return valve.
GESTRA MK 45A-2 3/4 inch class 150Thermostatic steam trap GESTRA RHOMBUSline, With single seat, standard capsule 5N2 for larger condensate flowrates, With Y-type strainer and integrated water hammer protection, Installation between flanges ASME B 16.5, Class150 RF, Face-to-face dimension 150mm, Body and bonnet 1.4404 / ASTM A182 F316L, Sealing ring graphite/CrNi, Control diaphragm: Hastelloy®, Internal parts: Stainless steel
GESTRA MK 45-2 1/2 Zoll class 300 GESTRA Rhombusline thermostatic steam trap, With single seat standard capsule 5N2 for larger condensate flowrates, With Y-strainer and integrated water hammer protection, Installation between flanges ASME B 16.5, Class300, Face-to-face dimension 150mm, Body and bonnet 1.0460 / ASTM A105, Sealing ring graphite/CrNi, Control diaphragm: Hastelloy®, Internal parts: Stainless steels
