Ball float steam trap with control unit DUPLEX, orifice (AO) 32, Installation between flanges ASME B 16.5, Class 150 RF, face-to-face dimension 267mm, body 1.0460/ASTM A105, cover 5.3103 (A395), gasket graphite/CrNi, stainless steel internal parts
Wafer type double leaf check valve DN 125 PN10/16Installation between flanges acc. to DIN PN10/16, body made of (GGG40)ductile iron, leaf made of CF8M stainless steel, shaft & spring made of stainless steel (SS316), gasket EPDM vulcanised (max. 120°C), Max. Max. operating pressure 16 bar, paint epoxy 150µm, RAL 5015
Wafer type double plate check valve DN 50 PN10/16Installation between flanges acc. to DIN PN10/16, body & plates made of CF8M stainless steel, shaft & spring made of stainless steel (SS316), gasket NBR vulcanised (max. 80°C) - NBR versions are used for gases, oils, alkalis, waste water or acids, Max. operating pressure 16 bar.
Disco check valve DN 65, intermediate flange PN6 up to 40 ANSI150/300, Face to face acc. to EN 558-1- series 49, Body, disc made of stainless steel (1.4408 / 1.4581), spring made of stainless steel (1.4571), seat made of EPDM, With 4 earthing lugs, Max. Operating pressure 40 bar
Stainless steel flanged ball valve DN 125, connection acc. to DIN PN16, face-to-face length EN 558-1-series 15, ball seal made of TFM1600(PTFE), ball & body made of stainless steel (1.4408), approval: TA-Luft, Firesafe, ATEX, AD2000-A4 with single acting pneumatic actuator
Brass 3-way ball valve 3/8 inch, type L bore, female thread acc. to ISO 228 F-F-F, body made of brass, nickel-plated, ball made of brass, hard-chrome plated, seal made of PTFE, seal shaft: Viton, medium temp. (min./max.): -10°C to +120°C Not suitable for steam, Max. operating pressure: 55 bar, Manual lever operation
Electric 3 way ball valve DN 50 PN16/40 T bore, full bore, flange connection acc. to DIN PN16/40, body & ball made of 1.4408 stainless steel, gasket TFM 1600, temp. (min./max.) -29°C to +175°C, max. Operating pressure 40 bar, TA Luft design, ATEX with Electric actuator 24V - 230V - 240V AC/DC
Stainless steel flanged shut-off valve DN 100 PN16Flange connection acc. to EN 1092-1 form B1, Face to face acc. to EN 558-1, series 1, Body & cover stainless steel 1.4408 (CF8M), Gland packing graphite (TA Luft), Body gasket: SS304 + graphite (TA Luft), Max. Operating temperature: 400°C, Actuation handwheel (rising stem), Approval AD2000, NACE, PED2014/68/EU, TA Luft
Flanged shut-off valve DN 32Flange connection acc. to EN 1092-1 form B1, Face to face acc. to EN 558-1, series 1, Body & cover made of steel 1.0619, Packing gland graphite (TA Luft), Body gasket: SS304 + graphite (TA Luft), Max. Operating temperature: 400°C, Actuation handwheel (rising stem), Approval AD2000, NACE, PED2014/68/EU, TA Luft
Flanged shut-off valve DN 200 PN40 with gland packingFlange connection PN40 acc. to EN 1092-1, face-to-face length acc. to EN 558-1, series 1, tightness class A acc. to EN 12266-1, body made of steel 1.0619 (GP240GH), plug made of 1.4021 (X20Cr13), valve seat made of stainless steel, gland packing graphite, body gasket: SS304 + graphite, nominal pressure 40bar, Max. Temperature: +450°C (depending on operating pressure), Kvs: 550 m³/h, Actuation handwheel (EN-GJS-400-18-LT)
Bellow valve DN 15 PN40 carbon steel with handwheel Bellows sealed globe valve with flanged connection PN10-PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve DN 20 PN40 carbon steel with handwheel Bellows sealed globe valve with flanged connection PN10-PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve DN 25 PN40 carbon steel with handwheel Bellows sealed globe valve with flanged connection PN10-PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve DN 32 PN40 carbon steel with handwheel Bellows sealed globe valve with flanged connection PN10-PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve DN 40 PN40 carbon steel with handwheel Bellows sealed globe valve with flanged connection PN10-PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve DN 50 PN40 carbon steel with handwheel Bellows sealed globe valve with flanged connection PN10-PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve DN 65 PN40 carbon steel with handwheel Bellows sealed globe valve with flanged connection PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve DN 80 PN40 carbon steel with handwheel Bellows sealed globe valve with flanged connection PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve DN 100 PN40 carbon steel with handwheel Bellows sealed globe valve with flanged connection PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve DN 125 PN40 carbon steel with handwheel Bellows sealed globe valve with flanged connection PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellow, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve DN 150 PN40 carbon steel with handwheel Bellows sealed globe valve with flanged connection PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve DN 200 PN40 carbon steel with handwheel Bellows sealed globe valve with flanged connection PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve DN 250 PN40 carbon steel with handwheel Bellows sealed globe valve with flanged connection PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve DN 300 PN40 carbon steel with handwheel Bellows sealed globe valve with flanged connection PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 1/2" ANSI Class150 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class150, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 3/4" ANSI Class150 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class150, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 1" ANSI Class150 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class150, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 1 1/2" ANSI Class150 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class150, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 2" ANSI Class150 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class150, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 2 1/2" ANSI Class150 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class150, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 3" ANSI Class150 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class150, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 4" ANSI Class150 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class150, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 6" ANSI Class150 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class150, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 8" ANSI Class150 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class150, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 10" ANSI Class150 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class150, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 1/2" ANSI Class300 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class300, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 3/4" ANSI Class300 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class300, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 1" ANSI Class300 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class300, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 1 1/2" ANSI Class300 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class300, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 2" ANSI Class300 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class300, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 2 1/2" ANSI Class300 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class300, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 3" ANSI Class300 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class300, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 4" ANSI Class300 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class300, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 6" ANSI Class300 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class300, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 8" ANSI Class300 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class300, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 10" ANSI Class300 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class300, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, hardfaced plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 1/2" ANSI Class600 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class600, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, stelllited plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 3/4" ANSI Class600 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class600, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, stelllited plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 1" ANSI Class600 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class600, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, stelllited plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 1 1/2" ANSI Class600 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class600, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, stelllited plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 2" ANSI Class600 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class600, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, stelllited plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 2 1/2" ANSI Class600 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class600, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, stelllited plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 3" ANSI Class600 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class600, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, stelllited plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 4" ANSI Class600 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class600, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, stelllited plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 6" ANSI Class600 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class600, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, stelllited plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 8" ANSI Class600 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class600, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, stelllited plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve 10" ANSI Class600 with handwheel Bellows sealed globe valve with flanged connection acc. to ASME B16.5, Class600, RF and face-to-face dimension acc. to ASME B16.10. The carbon steel body (WCB/1.0619) and the graphite packing make the valve suitable for demanding applications. Welded multi-layer bellows, stelllited plug and seat and 360° freely rotating conical plug are key advantages of these bellow valves. The bellows valve is tested and certified in accordance with the TA Luft standard and EN ISO 15848-1.
Bellow valve DN 15 PN40 stainless steel with handwheel Bellow sealed globe valve in stainless steel for flange connection PN10-PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The 1.4408 (CF8M) body and the graphite packing ensure a high degree of application reliability in these valves. Welded multilayer bellows, stellited plugs and seats and 360° freely rotating conical plugs are key properties of these bellow valves. The valves are tested and certified in accordance with TA Luft / EN ISO 15848-1.
Bellow valve DN 20 PN40 stainless steel with handwheel Bellow sealed globe valve in stainless steel for flange connection PN10-PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The 1.4408 (CF8M) body and the graphite packing ensure a high degree of application reliability in these valves. Welded multilayer bellows, stellited plugs and seats and 360° freely rotating conical plugs are key properties of these bellow valves. The valves are tested and certified in accordance with TA Luft / EN ISO 15848-1.
Bellow valve DN 25 PN40 stainless steel with handwheel Bellow sealed globe valve in stainless steel for flange connection PN10-PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The 1.4408 (CF8M) body and the graphite packing ensure a high degree of application reliability in these valves. Welded multilayer bellows, stellited plugs and seats and 360° freely rotating conical plugs are key properties of these bellow valves. The valves are tested and certified in accordance with TA Luft / EN ISO 15848-1.
Bellow valve DN 32 PN40 stainless steel with handwheel Bellow sealed globe valve in stainless steel for flange connection PN10-PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The 1.4408 (CF8M) body and the graphite packing ensure a high degree of application reliability in these valves. Welded multilayer bellows, stellited plugs and seats and 360° freely rotating conical plugs are key properties of these bellow valves. The valves are tested and certified in accordance with TA Luft / EN ISO 15848-1.
Bellow valve DN 40 PN40 stainless steel with handwheel Bellow sealed globe valve in stainless steel for flange connection PN10-PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The 1.4408 (CF8M) body and the graphite packing ensure a high degree of application reliability in these valves. Welded multilayer bellows, stellited plugs and seats and 360° freely rotating conical plugs are key properties of these bellow valves. The valves are tested and certified in accordance with TA Luft / EN ISO 15848-1.
Bellow valve DN 50 PN40 stainless steel with handwheel Bellow sealed globe valve in stainless steel for flange connection PN10-PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The 1.4408 (CF8M) body and the graphite packing ensure a high degree of application reliability in these valves. Welded multilayer bellows, stellited plugs and seats and 360° freely rotating conical plugs are key properties of these bellow valves. The valves are tested and certified in accordance with TA Luft / EN ISO 15848-1.
Bellow valve DN 65 PN40 stainless steel with handwheel Bellow sealed globe valve in stainless steel for flange connection PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The 1.4408 (CF8M) body and the graphite packing ensure a high degree of application reliability in these valves. Welded multilayer bellows, stellited plugs and seats and 360° freely rotating conical plugs are key properties of these bellow valves. The valves are tested and certified in accordance with TA Luft / EN ISO 15848-1.
Bellow valve DN 80 PN40 stainless steel with handwheel Bellow sealed globe valve in stainless steel for flange connection PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The 1.4408 (CF8M) body and the graphite packing ensure a high degree of application reliability in these valves. Welded multilayer bellows, stellited plugs and seats and 360° freely rotating conical plugs are key properties of these bellow valves. The valves are tested and certified in accordance with TA Luft / EN ISO 15848-1.
Bellow valve DN 100 PN40 stainless steel with handwheel Bellow sealed globe valve in stainless steel for flange connection PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The 1.4408 (CF8M) body and the graphite packing ensure a high degree of application reliability in these valves. Welded multilayer bellows, stellited plugs and seats and 360° freely rotating conical plugs are key properties of these bellow valves. The valves are tested and certified in accordance with TA Luft / EN ISO 15848-1.
Bellow valve DN 125 PN40 stainless steel with handwheel Bellow sealed globe valve in stainless steel for flange connection PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The 1.4408 (CF8M) body and the graphite packing ensure a high degree of application reliability in these valves. Welded multilayer bellows, stellited plugs and seats and 360° freely rotating conical plugs are key properties of these bellow valves. The valves are tested and certified in accordance with TA Luft / EN ISO 15848-1.
Bellow valve DN 150 PN40 stainless steel with handwheel Bellow sealed globe valve in stainless steel for flange connection PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The 1.4408 (CF8M) body and the graphite packing ensure a high degree of application reliability in these valves. Welded multilayer bellows, stellited plugs and seats and 360° freely rotating conical plugs are key properties of these bellow valves. The valves are tested and certified in accordance with TA Luft / EN ISO 15848-1.
Bellow valve DN 200 PN40 stainless steel with handwheel Bellow sealed globe valve in stainless steel for flange connection PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The 1.4408 (CF8M) body and the graphite packing ensure a high degree of application reliability in these valves. Welded multilayer bellows, stellited plugs and seats and 360° freely rotating conical plugs are key properties of these bellow valves. The valves are tested and certified in accordance with TA Luft / EN ISO 15848-1.
Bellow valve DN 250 PN40 stainless steel with handwheel Bellow sealed globe valve in stainless steel for flange connection PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The 1.4408 (CF8M) body and the graphite packing ensure a high degree of application reliability in these valves. Welded multilayer bellows, stellited plugs and seats and 360° freely rotating conical plugs are key properties of these bellow valves. The valves are tested and certified in accordance with TA Luft / EN ISO 15848-1.
Bellow valve DN 300 PN40 stainless steel with handwheel Bellow sealed globe valve in stainless steel for flange connection PN40 acc. to EN 1092-1, Form B and face-to-face dimension acc. to EN 558-1, Series 1. The 1.4408 (CF8M) body and the graphite packing ensure a high degree of application reliability in these valves. Welded multilayer bellows, stellited plugs and seats and 360° freely rotating conical plugs are key properties of these bellow valves. The valves are tested and certified in accordance with TA Luft / EN ISO 15848-1.
Bellow sealed globe valve DN 15 designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for dependable and maintenance-friendly operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 15 in stainless steel is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for reliable and maintenance-friendly operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 20 designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for dependable and maintenance-friendly operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 25 designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for dependable and maintenance-friendly operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 32 designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for dependable and maintenance-friendly operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 40 designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for dependable and maintenance-friendly operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 50 designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for dependable and maintenance-friendly operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 65 designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN16 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for dependable and maintenance-friendly operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 100 designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN16 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for dependable and maintenance-friendly operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 65 designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for dependable and maintenance-friendly operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 80 designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN10/16/40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for dependable and maintenance-friendly operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 100 designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for dependable and maintenance-friendly operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 20 in stainless steel is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for reliable and maintenance-friendly operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 25 in stainless steel is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for reliable and maintenance-friendly operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 32 in stainless steel is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for reliable and maintenance-friendly operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 40 in stainless steel is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for reliable and maintenance-friendly operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 50 in stainless steel is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for reliable and maintenance-friendly operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 65 in stainless steel is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN16 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for reliable and maintenance-friendly operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 65 in stainless steel is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for reliable and maintenance-friendly operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 100 in stainless steel is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN16 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for reliable and maintenance-friendly operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 80 in stainless steel is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN10/16/40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for reliable and maintenance-friendly operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 100 in stainless steel is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for reliable and maintenance-friendly operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 125 designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN16 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for dependable and maintenance-friendly operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 150 designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN16 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for dependable and maintenance-friendly operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 200 with balanced disc designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN16 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet and a balanced disc that reduces operating forces under higher differential pressures, ensuring dependable and maintenance-friendly operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 250 with guided disc designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN16 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Manufactured in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet and a guided disc that provides accurate disc guidance for stable and reliable operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 300 with guided disc designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN16 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Manufactured in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet and a guided disc that provides accurate disc guidance for stable and reliable operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 125 with balanced disc designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet and a balanced disc that reduces operating forces under higher differential pressures, ensuring dependable and maintenance-friendly operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 150 with balanced disc designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet and a balanced disc that reduces operating forces under higher differential pressures, ensuring dependable and maintenance-friendly operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 200 with balanced disc designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet and a balanced disc that reduces operating forces under higher differential pressures, ensuring dependable and maintenance-friendly operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 250 with guided disc designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Manufactured in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet and a guided disc that provides accurate disc guidance for stable and reliable operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 300 with guided disc designed for industrial piping systems and process plants provides reliable shut-off performance where low-emission sealing is essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow straightforward integration into new or existing piping systems. Manufactured in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet and a guided disc that provides accurate disc guidance for stable and reliable operation. Stainless steel bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel provides smooth and precise valve operation.
Bellow sealed globe valve DN 125 in stainless steel is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN16 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for reliable and maintenance-friendly operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 150 in stainless steel is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN16 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet for reliable and maintenance-friendly operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 200 in stainless steel with balanced disc is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN16 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet and a balanced disc that reduces operating forces under higher differential pressures, ensuring dependable and maintenance-friendly operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 250 in stainless steel with guided disc is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN16 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Manufactured in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet and a guided disc that provides accurate disc guidance for stable and reliable operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 300 in stainless steel with guided disc is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN16 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Manufactured in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet and a guided disc that provides accurate disc guidance for stable and reliable operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 125 in stainless steel with balanced disc is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet and a balanced disc that reduces operating forces under higher differential pressures, ensuring dependable and maintenance-friendly operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 150 in stainless steel with balanced disc is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet and a balanced disc that reduces operating forces under higher differential pressures, ensuring dependable and maintenance-friendly operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 200 in stainless steel with balanced disc is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Built in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet and a balanced disc that reduces operating forces under higher differential pressures, ensuring dependable and maintenance-friendly operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 250 in stainless steel with guided disc is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Manufactured in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet and a guided disc that provides accurate disc guidance for stable and reliable operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
Bellow sealed globe valve DN 300 in stainless steel with guided disc is designed for demanding industrial and process applications where corrosion resistance and low-emission sealing are essential. Flanged ends PN40 acc. to EN 1092-1, Form B1 and face-to-face dimensions in accordance with EN 558-1, Series 1 allow easy integration into new or existing piping systems. Manufactured in accordance with EN 13709, the valve features an OS&Y design with a bolted bonnet and a guided disc that provides accurate disc guidance for stable and reliable operation. Bellows and body gasket comply with TA-Luft acc. to ISO 15848-1, ensuring long-term leak-tight sealing. Stellited seat enhances wear resistance and contributes to an extended service life, while the handwheel enables smooth and precise valve operation.
The JC-Valves Type 540Q (SEAL+) is a two-piece, full-bore flanged ball valve rated at PN 40. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 540Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 540Q (SEAL+) DN 20 PN 40 is a two-piece, full-bore flanged ball valve. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. It has a face-to-face dimensions according to EN 558-1, Series 27 and features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 540Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 540Q (SEAL+) DN 25 PN 40 is a two-piece, full-bore flanged ball valve. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. It has a face-to-face dimensions according to EN 558-1, Series 27 and features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 540Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 540Q (SEAL+) DN 32 PN 40 is a two-piece, full-bore flanged ball valve. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. It has a face-to-face dimensions according to EN 558-1, Series 27 and features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 540Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 540Q (SEAL+) DN 40 PN 40 is a two-piece, full-bore flanged ball valve. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. It has a face-to-face dimensions according to EN 558-1, Series 27 and features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 540Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 540Q (SEAL+) DN 50 PN 40 is a two-piece, full-bore flanged ball valve. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. It has a face-to-face dimensions according to EN 558-1, Series 27 and features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 540Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 540Q (SEAL+) DN 65 PN 40 is a two-piece, full-bore flanged ball valve. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. It has a face-to-face dimensions according to EN 558-1, Series 27 and features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 540Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 540Q (SEAL+) DN 80 PN 40 is a two-piece, full-bore flanged ball valve. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. It has a face-to-face dimensions according to EN 558-1, Series 27 and features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 540Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 540Q (SEAL+) DN 100 PN 40 is a two-piece, full-bore flanged ball valve. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. It has a face-to-face dimensions according to EN 558-1, Series 27 and features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 540Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 540Q (SEAL+) DN 125 PN 40 is a two-piece, full-bore flanged ball valve. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. It has a face-to-face dimensions according to EN 558-1, Series 27 and features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 540Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 540Q (SEAL+) DN 150 PN 40 is a two-piece, full-bore flanged ball valve. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. It has a face-to-face dimensions according to EN 558-1, Series 27 and features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 540Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 516Q (SEAL+) DN 65 PN 16 is a two-piece, full-bore flanged ball valve. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. It has face-to-face dimensions according to EN 558-1, Series 27 and features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 516Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 516Q (SEAL+) DN 80 PN 16 is a two-piece, full-bore flanged ball valve. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. It has a face-to-face dimensions according to EN 558-1, Series 27 and features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 516Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 516Q (SEAL+) DN 100 PN 16 is a two-piece, full-bore flanged ball valve. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. It has a face-to-face dimensions according to EN 558-1, Series 27 and features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 516Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 516Q (SEAL+) DN 125 PN 16 is a two-piece, full-bore flanged ball valve. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. It has a face-to-face dimensions according to EN 558-1, Series 27 and features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 516Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 516Q (SEAL+) DN 150 PN 16 is a two-piece, full-bore flanged ball valve. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. It has a face-to-face dimensions according to EN 558-1, Series 27 and features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 516Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 516Q (SEAL+) DN 200 PN 16 is a two-piece, full-bore flanged ball valve. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. It has a face-to-face dimensions according to EN 558-1, Series 27 and features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 516Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 340Q (SEAL+) DN 15 PN40 is a two-piece, full-bore flanged ball valve with face-to-face dimensions according to EN 558-1, Series 1. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 340Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 340Q (SEAL+) DN 20 PN40 is a two-piece, full-bore flanged ball valve with face-to-face dimensions according to EN 558-1, Series 1. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 340Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 340Q (SEAL+) DN 25 PN40 is a two-piece, full-bore flanged ball valve with face-to-face dimensions according to EN 558-1, Series 1. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 340Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 340Q (SEAL+) DN 32 PN40 is a two-piece, full-bore flanged ball valve with face-to-face dimensions according to EN 558-1, Series 1. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 340Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 340Q (SEAL+) DN 40 PN40 is a two-piece, full-bore flanged ball valve with face-to-face dimensions according to EN 558-1, Series 1. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 340Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 340Q (SEAL+) DN 50 PN40 is a two-piece, full-bore flanged ball valve with face-to-face dimensions according to EN 558-1, Series 1. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 340Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 340Q (SEAL+) DN 65 PN40 is a two-piece, full-bore flanged ball valve with face-to-face dimensions according to EN 558-1, Series 1. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 340Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 340Q (SEAL+) DN 80 PN40 is a two-piece, full-bore flanged ball valve with face-to-face dimensions according to EN 558-1, Series 1. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 340Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 340Q (SEAL+) DN 100 PN40 is a two-piece, full-bore flanged ball valve with face-to-face dimensions according to EN 558-1, Series 1. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 340Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 340Q (SEAL+) DN 125 PN40 is a two-piece, full-bore flanged ball valve with face-to-face dimensions according to EN 558-1, Series 1. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 340Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 340Q (SEAL+) DN 150 PN40 is a two-piece, full-bore flanged ball valve with face-to-face dimensions according to EN 558-1, Series 1. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 340Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 316Q (SEAL+) DN 65 PN16 is a two-piece, full-bore flanged ball valve with face-to-face dimensions according to EN 558-1, Series 1. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 316Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 316Q (SEAL+) DN 80 PN16 is a two-piece, full-bore flanged ball valve with face-to-face dimensions according to EN 558-1, Series 1. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 316Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 316Q (SEAL+) DN 100 PN16 is a two-piece, full-bore flanged ball valve with face-to-face dimensions according to EN 558-1, Series 1. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 316Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 316Q (SEAL+) DN 125 PN16 is a two-piece, full-bore flanged ball valve with face-to-face dimensions according to EN 558-1, Series 1. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 316Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 316Q (SEAL+) DN 150 PN16 is a two-piece, full-bore flanged ball valve with face-to-face dimensions according to EN 558-1, Series 1. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 316Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
The JC-Valves Type 316Q (SEAL+) DN 200 PN16 is a two-piece, full-bore flanged ball valve with face-to-face dimensions according to EN 558-1, Series 1. It features a stainless steel body (1.4408), a stainless steel ball (A182 Grade F316), a stainless steel operating stem (1.4462), a TFM seat (modified PTFE), and a graphite gland packing. The ball valve features a blowout-proof shaft, an antistatic device, and an ISO 5211 bracket connection. The ball valve is Fire Safe in accordance with ISO 10497 and has TA-Luft/ISO 15848-1 approval. It also meets the requirements of PED 2014/68/EU and ATEX 2014/34/EU (II2GD) and is suitable for use up to SIL 3 in accordance with IEC 61508. The ball valve is certified in accordance with EN 14432 for the transport of liquid chemical products and liquefied gases. It is operated via a lockable stainless steel hand lever. The JC-Valves Type 316Q is a high-performance process ball valve for demanding applications in the chemical, petrochemical, oil and gas, energy, pharmaceutical, and food industries, as well as in the marine sector, at tank terminals, in mining, and with special media.
