Drinking water ball valve 1/2 inch with pneumatic actuator
Connection acc. to ISO 7/1 F-F, Flange plate acc. to ISO 5211,Body & Ball made of Brass CW617N, Ball seal: PTFE + FKM,Temperature range: -15°C to +90°C,2-way- full bore - 2-piece, Peaks up to +120°C for 1 hour only in open or closed position, Max. Operating pressure: 25 bar, Approval: WRAS, Actuation: Pneumatic actuator Double-acting, 90° pivoting
Drinking water ball valve 1/2 inch electric2-way stainless steel ball valve with DVGW approval for drinking water according to DIN EN 13828 W570-1, operated by an electric actuator 24V - 230V - 240V. Ideal for use in water/drinking water pipelines. The ball valve has a threaded connection (female threads) according to DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (1.4408) and the shaft is made of stainless steel (1.4401). Full bore with PTFE seat. Actuated by an electric multi-voltage actuator with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Electric ball valve 3/4 inch drinking water2-way stainless steel ball valve with DVGW approval for drinking water according to DIN EN 13828 W570-1, operated by an electric actuator 24V - 230V - 240V. Ideal for use in water/drinking water pipelines. The ball valve has a threaded connection (female threads) according to DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (1.4408) and the shaft is made of stainless steel (1.4401). Full bore with PTFE seat. Actuated by an electric multi-voltage actuator with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Electric ball valve 1 inch drinking water2-way stainless steel ball valve with DVGW approval for drinking water according to DIN EN 13828 W570-1, operated by an electric actuator 24V - 230V - 240V. Ideal for use in water/drinking water pipelines. The ball valve has a threaded connection (female threads) according to DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (1.4408) and the shaft is made of stainless steel (1.4401). Full bore with PTFE seat. Actuated by an electric multi-voltage actuator with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Electric ball valve 1 1/4 inch drinking water2-way stainless steel ball valve with DVGW approval for drinking water according to DIN EN 13828 W570-1, operated by an electric actuator 24V - 230V - 240V. Ideal for use in water/drinking water pipelines. The ball valve has a threaded connection (female threads) according to DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (1.4408) and the shaft is made of stainless steel (1.4401). Full bore with PTFE seat. Actuated by an electric multi-voltage actuator with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Electric ball valve 1 1/2 inch drinking water2-way stainless steel ball valve with DVGW approval for drinking water according to DIN EN 13828 W570-1, operated by an electric actuator 24V - 230V - 240V. Ideal for use in water/drinking water pipelines. The ball valve has a threaded connection (female threads) according to DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (1.4408) and the shaft is made of stainless steel (1.4401). Full bore with PTFE seat. Actuated by an electric multi-voltage actuator with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Electric ball valve 2 inch drinking water2-way stainless steel ball valve with DVGW approval for drinking water according to DIN EN 13828 W570-1, operated by an electric actuator 24V - 230V - 240V. Ideal for use in water/drinking water pipelines. The ball valve has a threaded connection (female threads) according to DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (1.4408) and the shaft is made of stainless steel (1.4401). Full bore with PTFE seat. Actuated by an electric multi-voltage actuator with a run time (90°): 29s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Gas ball valve 1/2 inch electric 2-way stainless steel ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas equipment directive GAR EU-2016-426. Ideal for gas pipelines. The valve has a female thread connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (1.4408) and the shaft is made of stainless steel (1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, silicone-free. Actuated by an multi-voltage electric actuator 24V - 230V - 240V, with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Gas ball valve 3/4 inch electric 2-way stainless steel ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas equipment directive GAR EU-2016-426. Ideal for gas pipelines. The valve has a female thread connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (1.4408) and the shaft is made of stainless steel (1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, silicone-free. Actuated by an multi-voltage electric actuator 24V - 230V - 240V, with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Gas ball valve 1 inch electric 2-way stainless steel ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas equipment directive GAR EU-2016-426. Ideal for gas pipelines. The valve has a female thread connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (1.4408) and the shaft is made of stainless steel (1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, silicone-free. Actuated by an multi-voltage electric actuator 24V - 230V - 240V, with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Gas ball valve 1 1/4 inch electric 2-way stainless steel ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas equipment directive GAR EU-2016-426. Ideal for gas pipelines. The valve has a female thread connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (1.4408) and the shaft is made of stainless steel (1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, silicone-free. Actuated by an multi-voltage electric actuator 24V - 230V - 240V, with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Gas ball valve 1 1/2 inch electric 2-way stainless steel ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas equipment directive GAR EU-2016-426. Ideal for gas pipelines. The valve has a female thread connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (1.4408) and the shaft is made of stainless steel (1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, silicone-free, Ex zone: Group 2, Category 1 ATEX 2014-34-EU. Actuated by an multi-voltage electric actuator 24V - 230V - 240V, with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Gas ball valve 2 inch electric 2-way stainless steel ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas equipment directive GAR EU-2016-426. Ideal for gas pipelines. The valve has a female thread connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (1.4408) and the shaft is made of stainless steel (1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, silicone-free, Ex zone: Group 2, Category 1 ATEX 2014-34-EU. Actuated by an multi-voltage electric actuator 24V - 230V - 240V, with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Ball valve DN 25 drinking water electric 2-way flanged ball valve made of stainless steel with DVGW approval for drinking water in accordance with DIN EN 1074-2, operated with an electric actuator. Ideal for application in water/drinking water lines. The ball valve has a flange connection according to PN10/16 & face-to-face length according to EN 558-1, R27. The valve body and ball are made of stainless steel (material no.: 1.4408). Full bore with PTFE seal. Silicon-free. Actuated by an electric multi-voltage actuator (24V - 230V - 240V AC/DC) with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Ball valve DN 32 drinking water electric 2-way flanged ball valve made of stainless steel with DVGW approval for drinking water in accordance with DIN EN 1074-2, operated with an electric actuator. Ideal for application in water/drinking water lines. The ball valve has a flange connection according to PN10/16 & face-to-face length according to EN 558-1, R27. The valve body and ball are made of stainless steel (material no.: 1.4408). Full bore with PTFE seal. Silicon-free. Actuated by an electric multi-voltage actuator (24V - 230V - 240V AC/DC) with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Ball valve DN 40 drinking water electric 2-way flanged ball valve made of stainless steel with DVGW approval for drinking water in accordance with DIN EN 1074-2, operated with an electric actuator. Ideal for application in water/drinking water lines. The ball valve has a flange connection according to PN10/16 & face-to-face length according to EN 558-1, R27. The valve body and ball are made of stainless steel (material no.: 1.4408). Full bore with PTFE seal. Silicon-free. Actuated by an electric multi-voltage actuator (24V - 230V - 240V AC/DC) with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Ball valve DN 50 drinking water electric 2-way flanged ball valve made of stainless steel with DVGW approval for drinking water in accordance with DIN EN 1074-2, operated with an electric actuator. Ideal for application in water/drinking water lines. The ball valve has a flange connection according to PN10/16 & face-to-face length according to EN 558-1, R27. The valve body and ball are made of stainless steel (material no.: 1.4408). Full bore with PTFE seal. Silicon-free. Actuated by an electric multi-voltage actuator (24V - 230V - 240V AC/DC) with a run time (90°): 13s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Ball valve DN 80 drinking water electric 2-way flanged ball valve made of stainless steel with DVGW approval for drinking water in accordance with DIN EN 1074-2, operated with an electric actuator. Ideal for application in water/drinking water lines. The ball valve has a flange connection according to PN10/16 & face-to-face length according to EN 558-1, R27. The valve body and ball are made of stainless steel (material no.: 1.4408). Full bore with PTFE seal. Silicon-free. Actuated by an electric multi-voltage actuator (24V - 230V - 240V AC/DC) with a run time (90°): 34s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Ball valve DN 100 drinking water electric 2-way flanged ball valve made of stainless steel with DVGW approval for drinking water in accordance with DIN EN 1074-2, operated with an electric actuator. Ideal for application in water/drinking water lines. The ball valve has a flange connection according to PN10/16 & face-to-face length according to EN 558-1, R27. The valve body and ball are made of stainless steel (material no.: 1.4408). Full bore with PTFE seal. Silicon-free. Actuated by an electric multi-voltage actuator (24V - 230V - 240V AC/DC) with a run time (90°): 58s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Ball valve DN 65 drinking water electric 2-way flanged ball valve made of stainless steel with DVGW approval for drinking water in accordance with DIN EN 1074-2, operated with an electric actuator. Ideal for application in water/drinking water lines. The ball valve has a flange connection according to PN10/16 & face-to-face length according to EN 558-1, R27. The valve body and ball are made of stainless steel (material no.: 1.4408). Full bore with PTFE seal. Silicon-free. Actuated by an electric multi-voltage actuator (24V - 230V - 240V AC/DC) with a run time (90°): 29s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Flanged ball valve DN 25 gas electric 2-way flanged ball valve made of stainless steel with DVGW approval for gas/fuel gases according to G260/1, operated with an electric actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body and the ball are made of stainless steel (material no.: 1.4408). Full bore with PTFE seal. Actuated by a multi-voltage electric actuator (24V - 230V - 240V AC/DC) with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Flanged ball valve DN 32 gas electric 2-way flanged ball valve made of stainless steel with DVGW approval for gas/fuel gases according to G260/1, operated with an electric actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body and the ball are made of stainless steel (material no.: 1.4408). Full bore with PTFE seal. Actuated by a multi-voltage electric actuator (24V - 230V - 240V AC/DC) with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Flanged ball valve DN 40 gas electric 2-way flanged ball valve made of stainless steel with DVGW approval for gas/fuel gases according to G260/1, operated with an electric actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body and the ball are made of stainless steel (material no.: 1.4408). Full bore with PTFE seal. Actuated by a multi-voltage electric actuator (24V - 230V - 240V AC/DC) with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Flanged ball valve DN 50 gas electric 2-way flanged ball valve made of stainless steel with DVGW approval for gas/fuel gases according to G260/1, operated with an electric actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body and the ball are made of stainless steel (material no.: 1.4408). Full bore with PTFE seal. Actuated by a multi-voltage electric actuator (24V - 230V - 240V AC/DC) with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Flanged ball valve DN 65 gas electric 2-way flanged ball valve made of stainless steel with DVGW approval for gas/fuel gases according to G260/1, operated with an electric actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body and the ball are made of stainless steel (material no.: 1.4408). Full bore with PTFE seal. Actuated by a multi-voltage electric actuator (24V - 230V - 240V AC/DC) with a run time (90°): 29s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Flanged ball valve DN 80 gas electric 2-way flanged ball valve made of stainless steel with DVGW approval for gas/fuel gases according to G260/1, operated with an electric actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body and the ball are made of stainless steel (material no.: 1.4408). Full bore with PTFE seal. Actuated by a multi-voltage electric actuator (24V - 230V - 240V AC/DC) with a run time (90°): 34s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Flanged ball valve DN 100 gas electric 2-way flanged ball valve made of stainless steel with DVGW approval for gas/fuel gases according to G260/1, operated with an electric actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body and the ball are made of stainless steel (material no.: 1.4408). Full bore with PTFE seal. Actuated by a multi-voltage electric actuator (24V - 230V - 240V AC/DC) with a run time (90°): 34s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Flanged ball valve DN 25 gas electric 2-way flanged ball valve made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with an electric actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a multi-voltage electric actuator (24V - 230V - 240V AC/DC) with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Flanged ball valve DN 32 gas electric 2-way flanged ball valve made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with an electric actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a multi-voltage electric actuator (24V - 230V - 240V AC/DC) with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Flanged ball valve DN 40 gas electric 2-way flanged ball valve made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with an electric actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a multi-voltage electric actuator (24V - 230V - 240V AC/DC) with a run time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Flanged ball valve DN 50 gas electric 2-way flanged ball valve made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with an electric actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a multi-voltage electric actuator (24V - 230V - 240V AC/DC) with a run time (90°): 13s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Flanged ball valve DN 65 gas electric 2-way flanged ball valve made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with an electric actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body and the ball are made of carbon steel (material no.: 1.0619). Full bore with PTFE seal (sealing system A). Actuated by a multi-voltage electric actuator (24V - 230V - 240V AC/DC) with a run time (90°): 29s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Flanged ball valve DN 80 gas electric 2-way flanged ball valve made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with an electric actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body and the ball are made of carbon steel (material no.: 1.0619). Full bore with PTFE seal (sealing system A). Actuated by a multi-voltage electric actuator (24V - 230V - 240V AC/DC) with a run time (90°): 34s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Flanged ball valve DN 100 gas electric 2-way flanged ball valve made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with an electric actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body and the ball are made of carbon steel (material no.: 1.0619). Full bore with PTFE seal (sealing system A). Actuated by a multi-voltage electric actuator (24V - 230V - 240V AC/DC) with a run time (90°): 58s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery fail-safe pack (NC/NO) upon request.
Flanged ball valve DN 25 gas pneumatic 2-way flanged ball valve made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 32 gas pneumatic 2-way flanged ball valve made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 40 gas pneumatic 2-way flanged ball valve made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 50 gas pneumatic 2-way flanged ball valve made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 65 gas pneumatic 2-way flanged ball valve made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 80 gas pneumatic 2-way flanged ball valve made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 100 gas pneumatic 2-way flanged ball valve made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 25 gas pneumatic 2-way flanged ball valve type KH122G made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with a single-acting/spring-return pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a single-acting pneumatic actuator (Normally closed/NC). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 32 gas pneumatic 2-way flanged ball valve type KH122G made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with a single-acting/spring-return pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a single-acting pneumatic actuator (Normally closed/NC). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 40 gas pneumatic 2-way flanged ball valve type KH122G made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with a single-acting/spring-return pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a single-acting pneumatic actuator (Normally closed/NC). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 50 gas pneumatic 2-way flanged ball valve type KH122G made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with a single-acting/spring-return pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a single-acting pneumatic actuator (Normally closed/NC). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 65 gas pneumatic 2-way flanged ball valve type KH122G made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with a single-acting/spring-return pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a single-acting pneumatic actuator (Normally closed/NC). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 80 gas pneumatic 2-way flanged ball valve type KH122G made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with a single-acting/spring-return pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a single-acting pneumatic actuator (Normally closed/NC). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 100 gas pneumatic 2-way flanged ball valve type KH122G made of carbon steel with DVGW approval for gas/fuel gases according to G260/1, operated with a single-acting/spring-return pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body is made of cast steel (material no.: 1.0619) and the ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a single-acting pneumatic actuator (Normally closed/NC). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Gas ball valve 1/2 inch pneumatic 2-way pneumatic ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas appliance regulation GAR EU-2016-426. Ideal for gas pipelines with gases according to G260, argon, hydrogen, biogases according to G262, and acetylene. The valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.-1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, antistatic design & silicone-free. Suitable for Ex area, group 2 category 1 Atex 2014-34-EU. LABS conform to VDMA 24364. Actuated by a single-acting pneumatic actuator (spring return/normally closed). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Gas ball valve 1 1/4 inch pneumatic 2-way pneumatic ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas appliance regulation GAR EU-2016-426. Ideal for gas pipelines with gases according to G260, argon, hydrogen, biogases according to G262, and acetylene. The valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.-1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, antistatic design & silicone-free. Suitable for Ex area, group 2 category 1 Atex 2014-34-EU. LABS conform to VDMA 24364. Actuated by a single-acting pneumatic actuator (spring return/normally closed). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Gas ball valve 1 1/2 inch pneumatic 2-way pneumatic ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas appliance regulation GAR EU-2016-426. Ideal for gas pipelines with gases according to G260, argon, hydrogen, biogases according to G262, and acetylene. The valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.-1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, antistatic design & silicone-free. Suitable for Ex area, group 2 category 1 Atex 2014-34-EU. LABS conform to VDMA 24364. Actuated by a single-acting pneumatic actuator (spring return/normally closed). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Gas ball valve 1 inch pneumatic 2-way pneumatic ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas appliance regulation GAR EU-2016-426. Ideal for gas pipelines with gases according to G260, argon, hydrogen, biogases according to G262, and acetylene. The valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.-1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, antistatic design & silicone-free. Suitable for Ex area, group 2 category 1 Atex 2014-34-EU. LABS conform to VDMA 24364. Actuated by a single-acting pneumatic actuator (spring return/normally closed). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Gas ball valve 2 inch pneumatic 2-way pneumatic ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas appliance regulation GAR EU-2016-426. Ideal for gas pipelines with gases according to G260, argon, hydrogen, biogases according to G262, and acetylene. The valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.-1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, antistatic design & silicone-free. Suitable for Ex area, group 2 category 1 Atex 2014-34-EU. LABS conform to VDMA 24364. Actuated by a single-acting pneumatic actuator (spring return/normally closed). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Gas ball valve 1/2 inch pneumatic 2-way pneumatic ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas appliance regulation GAR EU-2016-426. Ideal for gas pipelines with gases according to G260, argon, hydrogen, biogases according to G262, and acetylene. The valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.: 1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, antistatic design & silicone-free. Suitable for Ex area, group 2 category 1 Atex 2014-34-EU. LABS conform to VDMA 24364. Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Gas ball valve 1 inch pneumatic 2-way pneumatic ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas appliance regulation GAR EU-2016-426. Ideal for gas pipelines with gases according to G260, argon, hydrogen, biogases according to G262, and acetylene. The valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.: 1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, antistatic design & silicone-free. Suitable for Ex area, group 2 category 1 Atex 2014-34-EU. LABS conform to VDMA 24364. Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Gas ball valve 1 1/4 inch pneumatic 2-way pneumatic ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas appliance regulation GAR EU-2016-426. Ideal for gas pipelines with gases according to G260, argon, hydrogen, biogases according to G262, and acetylene. The valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.: 1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, antistatic design & silicone-free. Suitable for Ex area, group 2 category 1 Atex 2014-34-EU. LABS conform to VDMA 24364. Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Gas ball valve 1 1/2 inch pneumatic 2-way pneumatic ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas appliance regulation GAR EU-2016-426. Ideal for gas pipelines with gases according to G260, argon, hydrogen, biogases according to G262, and acetylene. The valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.: 1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, antistatic design & silicone-free. Suitable for Ex area, group 2 category 1 Atex 2014-34-EU. LABS conform to VDMA 24364. Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Gas ball valve 2 inch pneumatic 2-way pneumatic ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas appliance regulation GAR EU-2016-426. Ideal for gas pipelines with gases according to G260, argon, hydrogen, biogases according to G262, and acetylene. The valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.: 1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, antistatic design & silicone-free. Suitable for Ex area, group 2 category 1 Atex 2014-34-EU. LABS conform to VDMA 24364. Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Gas ball valve 3/4 inch pneumatic 2-way pneumatic ball valve with DVGW gas approval PN16 according to DIN EN 13774, DVGW approval according to gas appliance regulation GAR EU-2016-426. Ideal for gas pipelines with gases according to G260, argon, hydrogen, biogases according to G262, and acetylene. The valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.: 1.4401). Full bore with PTFE seal. TA-Luft approval, fire safe design, antistatic design & silicone-free. Suitable for Ex area, group 2 category 1 Atex 2014-34-EU. LABS conform to VDMA 24364. Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 25 gas pneumatic 2-way flanged ball valve type KH123G made of stainless steel with DVGW approval for gas/fuel gases according to G260/1, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 32 gas pneumatic 2-way flanged ball valve type KH123G made of stainless steel with DVGW approval for gas/fuel gases according to G260/1, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Pneumatic flanged ball valve DN 40 for gas 2-way flanged ball valve type KH123G made of stainless steel with DVGW approval for gas/fuel gases according to G260/1, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 50 for gas 2-way flanged ball valve type KH123G made of stainless steel with DVGW approval for gas/fuel gases according to G260/1, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 65 pneumatic2-way flanged ball valve type KH123G made of stainless steel with DVGW approval for gas/fuel gases according to G260/1, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 80 pneumatic2-way flanged ball valve type KH123G made of stainless steel with DVGW approval for gas/fuel gases according to G260/1, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 100 pneumatic2-way flanged ball valve type KH123G made of stainless steel with DVGW approval for gas/fuel gases according to G260/1, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system A). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Drinking water ball valve 1/2 inch pneumatic 2-way pneumatic ball valve type KH124W made of stainless steel with DVGW drinking water approval PN10 in accordance with DIN EN 13828 W570-1. Ideal for application in potable water/water systems. The shut-off valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.-1.4401). Full bore with PTFE seal. TA-Luft approval, Fire-safe design, antistatic design, silicone-free, LABS conformity as per VDMA 24364. Actuated by a single-acting pneumatic actuator (spring force closing/normally closed). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Drinking water ball valve 1 inch pneumatic 2-way pneumatic ball valve type KH124W made of stainless steel with DVGW drinking water approval PN10 in accordance with DIN EN 13828 W570-1. Ideal for application in potable water/water systems. The shut-off valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.-1.4401). Full bore with PTFE seal. TA-Luft approval, Fire-safe design, antistatic design, silicone-free, LABS conformity as per VDMA 24364. Actuated by a single-acting pneumatic actuator (spring force closing/normally closed). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Drinking water ball valve 1 1/2 inch pneumatic 2-way pneumatic ball valve type KH124W made of stainless steel with DVGW drinking water approval PN10 in accordance with DIN EN 13828 W570-1. Ideal for application in potable water/water systems. The shut-off valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.: 1.4401). Full bore with PTFE seal. TA-Luft approval, Fire-safe design, antistatic design, silicone-free, LABS conformity as per VDMA 24364. Actuated by a single-acting pneumatic actuator (spring force closing/normally closed). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Drinking water ball valve 1 1/4 inch pneumatic 2-way pneumatic ball valve type KH124W made of stainless steel with DVGW drinking water approval PN10 in accordance with DIN EN 13828 W570-1. Ideal for application in potable water/water systems. The shut-off valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.: 1.4401). Full bore with PTFE seal. TA-Luft approval, Fire-safe design, antistatic design, silicone-free, LABS conformity as per VDMA 24364. Actuated by a single-acting pneumatic actuator (spring force closing/normally closed). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 25 drinking water pneumatic 2-way flanged ball valve type KH123W made of stainless steel with DVGW approval for drinking/potable water, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system W). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 32 drinking water pneumatic 2-way flanged ball valve type KH123W made of stainless steel with DVGW approval for drinking/potable water, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system W). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 40 drinking water pneumatic 2-way flanged ball valve type KH123W made of stainless steel with DVGW approval for drinking/potable water, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system W). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 50 drinking water pneumatic 2-way flanged ball valve type KH123W made of stainless steel with DVGW approval for drinking/potable water, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system W). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 65 drinking water pneumatic 2-way flanged ball valve type KH123W made of stainless steel with DVGW approval for drinking/potable water, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system W). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 80 drinking water pneumatic 2-way flanged ball valve type KH123W made of stainless steel with DVGW approval for drinking/potable water, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system W). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 100 drinking water pneumatic 2-way flanged ball valve type KH123W made of stainless steel with DVGW approval for drinking/potable water, operated with a double-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system W). Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 25 drinking water pneumatic 2-way flanged ball valve type KH123W made of stainless steel with DVGW approval for drinking/potable water, operated with a single-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system W). Actuated by a single-acting/spring return pneumatic actuator (Normally closed /NO). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 32 drinking water pneumatic 2-way flanged ball valve type KH123W made of stainless steel with DVGW approval for drinking/potable water, operated with a single-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system W). Actuated by a single-acting/spring return pneumatic actuator (Normally closed /NO). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 40 drinking water pneumatic 2-way flanged ball valve type KH123W made of stainless steel with DVGW approval for drinking/potable water, operated with a single-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system W). Actuated by a single-acting/spring return pneumatic actuator (Normally closed /NO). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 50 drinking water pneumatic 2-way flanged ball valve type KH123W made of stainless steel with DVGW approval for drinking/potable water, operated with a single-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system W). Actuated by a single-acting/spring return pneumatic actuator (Normally closed /NO). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 65 drinking water pneumatic 2-way flanged ball valve type KH123W made of stainless steel with DVGW approval for drinking/potable water, operated with a single-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system W). Actuated by a single-acting/spring return pneumatic actuator (Normally closed /NO). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 80 drinking water pneumatic 2-way flanged ball valve type KH123W made of stainless steel with DVGW approval for drinking/potable water, operated with a single-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system W). Actuated by a single-acting/spring return pneumatic actuator (Normally closed /NO). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Flanged ball valve DN 100 drinking water pneumatic 2-way flanged ball valve type KH123W made of stainless steel with DVGW approval for drinking/potable water, operated with a single-acting pneumatic actuator. Fire-safe design, TA-Luft, antistatic design & silicone-free. The ball valve has a flange connection according to PN10/16 & face-to-face according to EN 558-1, R27. The valve body & ball is made of stainless steel (material no.: 1.4408). Full bore with PTFE seal (sealing system W). Actuated by a single-acting/spring return pneumatic actuator (Normally closed /NO). Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Drinking water ball valve 1/2 inch pneumatic 2-way pneumatic ball valve type KH124W made of stainless steel with DVGW drinking water approval PN10 in accordance with DIN EN 13828 W570-1. Ideal for application in potable water/water systems. The shut-off valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.: 1.4401). Full bore with PTFE seal. TA-Luft approval, Fire-safe design, antistatic design, silicone-free, LABS conformity as per VDMA 24364. Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Drinking water ball valve 3/4 inch pneumatic 2-way pneumatic ball valve type KH124W made of stainless steel with DVGW drinking water approval PN10 in accordance with DIN EN 13828 W570-1. Ideal for application in potable water/water systems. The shut-off valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.: 1.4401). Full bore with PTFE seal. TA-Luft approval, Fire-safe design, antistatic design, silicone-free, LABS conformity as per VDMA 24364. Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Drinking water ball valve 1 inch pneumatic 2-way pneumatic ball valve type KH124W made of stainless steel with DVGW drinking water approval PN10 in accordance with DIN EN 13828 W570-1. Ideal for application in potable water/water systems. The shut-off valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.: 1.4401). Full bore with PTFE seal. TA-Luft approval, Fire-safe design, antistatic design, silicone-free, LABS conformity as per VDMA 24364. Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Drinking water ball valve 1 1/4 inch pneumatic 2-way pneumatic ball valve type KH124W made of stainless steel with DVGW drinking water approval PN10 in accordance with DIN EN 13828 W570-1. Ideal for application in potable water/water systems. The shut-off valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.: 1.4401). Full bore with PTFE seal. TA-Luft approval, Fire-safe design, antistatic design, silicone-free, LABS conformity as per VDMA 24364. Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Drinking water ball valve 1 1/2 inch pneumatic 2-way pneumatic ball valve type KH124W made of stainless steel with DVGW drinking water approval PN10 in accordance with DIN EN 13828 W570-1. Ideal for application in potable water/water systems. The shut-off valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.: 1.4401). Full bore with PTFE seal. TA-Luft approval, Fire-safe design, antistatic design, silicone-free, LABS conformity as per VDMA 24364. Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Drinking water ball valve 2 inch pneumatic 2-way pneumatic ball valve type KH124W made of stainless steel with DVGW drinking water approval PN10 in accordance with DIN EN 13828 W570-1. Ideal for application in potable water/water systems. The shut-off valve has a female threaded connection in accordance with DIN EN 10226-1 (ISO 7/1). The valve body and ball are made of stainless steel (material no.: 1.4408) and the shaft is made of stainless steel (material no.: 1.4401). Full bore with PTFE seal. TA-Luft approval, Fire-safe design, antistatic design, silicone-free, LABS conformity as per VDMA 24364. Actuated by a double-acting pneumatic actuator. Note: The pneumatic actuator is sized for a control pressure of 6 bar.
Drinking water ball valve 1/2 inch electric2-way brass ball valve with DVGW approval for drinking water in accordance with DIN EN 13828, operated by an electric actuator. Ideal for use in water/drinking water pipelines. The ball valve has a female thread connection in accordance with DIN EN 10226-1. The valve body is made of lead-free brass (CW724R), whereas the ball is made of stainless steel (1.4408). Full bore with PTFE seal. LABS conform according to VDMA 24364 & silicone-free. Actuated by an electric actuator with multi-voltage capability (24V - 230V - 240V AC/DC). The actuator has a run time (90°): 9s ± 10%. Upon request, the actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack/Fail-safe (NC/NO).
Drinking water ball valve 3/4 inch electric2-way brass ball valve with DVGW approval for drinking water in accordance with DIN EN 13828, operated by an electric actuator. Ideal for use in water/drinking water pipelines. The ball valve has a female thread connection in accordance with DIN EN 10226-1. The valve body is made of lead-free brass (CW724R), whereas the ball is made of stainless steel (1.4408). Full bore with PTFE seal. LABS conform according to VDMA 24364 & silicone-free. Actuated by an electric actuator with multi-voltage capability (24V - 230V - 240V AC/DC). The actuator has a run time (90°): 9s ± 10%. Upon request, the actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack/Fail-safe (NC/NO).
Drinking water ball valve 1 inch electric2-way brass ball valve with DVGW approval for drinking water in accordance with DIN EN 13828, operated by an electric actuator. Ideal for use in water/drinking water pipelines. The ball valve has a female thread connection in accordance with DIN EN 10226-1. The valve body is made of lead-free brass (CW724R), whereas the ball is made of stainless steel (1.4408). Full bore with PTFE seal. LABS conform according to VDMA 24364 & silicone-free. Actuated by an electric actuator with multi-voltage capability (24V - 230V - 240V AC/DC). The actuator has a run time (90°): 9s ± 10%. Upon request, the actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack/Fail-safe (NC/NO).
Drinking water ball valve 1 1/4 inch electric2-way brass ball valve with DVGW approval for drinking water in accordance with DIN EN 13828, operated by an electric actuator. Ideal for use in water/drinking water pipelines. The ball valve has a female thread connection in accordance with DIN EN 10226-1. The valve body is made of lead-free brass (CW724R), whereas the ball is made of stainless steel (1.4408). Full bore with PTFE seal. LABS conform according to VDMA 24364 & silicone-free. Actuated by an electric actuator with multi-voltage capability (24V - 230V - 240V AC/DC). The actuator has a run time (90°): 9s ± 10%. Upon request, the actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack/Fail-safe (NC/NO).
Drinking water ball valve 1 1/2 inch electric2-way brass ball valve with DVGW approval for drinking water in accordance with DIN EN 13828, operated by an electric actuator. Ideal for use in water/drinking water pipelines. The ball valve has a female thread connection in accordance with DIN EN 10226-1. The valve body is made of lead-free brass (CW724R), whereas the ball is made of stainless steel (1.4408). Full bore with PTFE seal. LABS conform according to VDMA 24364 & silicone-free. Actuated by an electric actuator with multi-voltage capability (24V - 230V - 240V AC/DC). The actuator has a run time (90°): 9s ± 10%. Upon request, the actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack/Fail-safe (NC/NO).
Drinking water ball valve 2 inch electric2-way brass ball valve with DVGW approval for drinking water in accordance with DIN EN 13828, operated by an electric actuator. Ideal for use in water/drinking water pipelines. The ball valve has a female thread connection in accordance with DIN EN 10226-1. The valve body is made of lead-free brass (CW724R), whereas the ball is made of stainless steel (1.4408). Full bore with PTFE seal. LABS conform according to VDMA 24364 & silicone-free. Actuated by an electric actuator with multi-voltage capability (24V - 230V - 240V AC/DC). The actuator has a run time (90°): 9s ± 10%. Upon request, the actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack/Fail-safe (NC/NO).
Stem extension 100 mm for ball valveStainless steel (1.4301) stem extension/extended bonnet with a length of 100 mm for mounting on ball valves. Suitable for ball valves with ISO 5211 top flange and for mounting actuators. Valve side connection F04, square socket 9 mm, and actuator side connection F03/F04, square socket 9 mm, in accordance with ISO 5211. Fits our ball valve types KH155 & KH156 (DIN): DN15-DN20, KH155 (ANSI): 1/2“, KL/KT112 (DIN): DN15, KH154: 1/4”, 3/8“, 1/2”. Custom hub lengths and actuator options available on request. Detailed dimensions and technical drawings can be found in the data sheet.
Stem extension 100 mm for ball valveStainless steel (1.4301) stem extension/extended bonnet type SV4-2 with a length of 100 mm for mounting on ball valves. Suitable for ball valves with ISO 5211 top flange and for mounting actuators. Valve side connection F05, square socket 11 mm, and actuator side connection F04/F05, square socket 11 mm, in accordance with ISO 5211. Fits our ball valve types KH155 and KH156 (DIN) - DN25-DN32, KH155 (ANSI) - 1", KL/KT112 (DIN) - DN25, KH154 - 1". Custom hub lengths and actuator options available upon request. Detailed dimensions and technical drawings can be found in the data sheet.
Stem extension 100 mm for ball valveStainless steel (1.4301) stem extension/extended bonnet type SV4-3 with a length of 100 mm for mounting on ball valves. Suitable for ball valves with ISO 5211 top flange and for mounting actuators. Valve side connection F07, square socket 14 mm, and actuator side connection F05/07, square stem 14 mm, in accordance with ISO 5211. Fits our ball valve types KH155 and KH156 (DIN): DN40-DN50, KH155 (ANSI): 1-1/2"-2", KL/KT112 (DIN): DN40-DN50, KH154: 1-1/2"-2". Custom hub lengths and actuator options available upon request. Detailed dimensions and technical drawings can be found in the data sheet.
Stem extension 100 mm for ball valveStainless steel (1.4301) stem extension/extended bonnet type SV4-4 with a length of 100 mm for mounting on ball valves. Suitable for ball valves with ISO 5211 top flange and for mounting actuators. Valve side connection F10, square socket 17 mm, and actuator side connection F07/10, square stem 17 mm, in accordance with ISO 5211. Fits our ball valve types KH155 (DIN): DN80, KH155 (ANSI): 3", KL/KT112 (DIN): DN65-DN80. Custom hub lengths and actuator options available upon request. Detailed dimensions and technical drawings can be found in the data sheet.
Stem extension 100 mm for ball valveStainless steel (1.4301) stem extension/extended bonnet type SV4-5 with a length of 100 mm for mounting on ball valves. Suitable for ball valves with ISO 5211 top flange and for mounting actuators. Valve side connection F10, square socket 22 mm, and actuator side connection F10, square stem 22 mm, in accordance with ISO 5211. Fits our ball valve types KH155 & KH156 (DIN): DN100, KH155 (ANSI): 4", KL/KT112 (DIN): DN100. Custom hub lengths and actuator options available upon request. Detailed dimensions and technical drawings can be found in the data sheet.
Stem extension 120 mm for ball valveStainless steel (1.4301) stem extension/extended bonnet type SV4-6 with a length of 120 mm for mounting on ball valves. Suitable for ball valves with ISO 5211 top flange and for mounting actuators. Valve side connection F12, square socket 27 mm, and actuator side connection F12, square stem 27 mm, in accordance with ISO 5211. Fits our ball valve types KH155 & KH156 (DIN): DN125 - DN150, KH155 (ANSI): 5" - 6". Custom hub lengths and actuator options available upon request. Detailed dimensions and technical drawings can be found in the data sheet.
Stem extension 120 mm for ball valveStainless steel (1.4301) stem extension/extended bonnet type SV4-7 with a length of 120 mm for mounting on ball valves. Suitable for ball valves with ISO 5211 top flange and for mounting actuators. Valve side connection F14, square socket 36 mm, and actuator side connection F14, square stem 36 mm, in accordance with ISO 5211. Fits our ball valve types KH155 (DIN): DN200, KH155 (ANSI): 8". Custom hub lengths and actuator options available upon request. Detailed dimensions and technical drawings can be found in the data sheet.
Stainless steel butterfly valve type AK202 operated by an electric actuator 24V - 230V - 240V AC/DC. The valve is suitable for installation between flanges according to DIN PN10/16 and ANSI/ASME Class 150. Wafer-type body and centric/concentric design. The body and disc are made of stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of EPDM. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by an electric multi-voltage actuator with a running time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Stainless steel butterfly valve type AK202 operated by an electric actuator 24V - 230V - 240V AC/DC. The valve is suitable for installation between flanges according to DIN PN10/16 and ANSI/ASME Class 150. Wafer-type body and centric/concentric design. The body and disc are made of stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of EPDM. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a multi-voltage electric actuator with a running time (90°): 13s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Stainless steel butterfly valve type AK202 operated by an electric actuator 24V - 230V - 240V AC/DC. The valve is suitable for installation between flanges according to DIN PN10/16 and ANSI/ASME Class 150. Wafer-type body and centric/concentric design. The body and disc are made of stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of EPDM. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a multi-voltage electric actuator with a running time (90°): 13s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Stainless steel butterfly valve type AK202 operated by an electric actuator 24V - 230V - 240V AC/DC. The valve is suitable for installation between flanges according to DIN PN10/16 and ANSI/ASME Class 150. Wafer-type body and centric/concentric design. The body and disc are made of stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of EPDM. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a multi-voltage electric actuator with a running time (90°): 29s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Stainless steel butterfly valve type AK202 operated by an electric actuator 24V - 230V - 240V AC/DC. The valve is suitable for installation between flanges according to DIN PN10/16 and ANSI/ASME Class 150. Wafer-type body and centric/concentric design. The body and disc are made of stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of EPDM. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a multi-voltage electric actuator with a running time (90°): 34s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Stainless steel butterfly valve type AK202 operated by an electric actuator 24V - 230V - 240V AC/DC. The valve is suitable for installation between flanges according to DIN PN10/16 and ANSI/ASME Class 150. Wafer-type body and centric/concentric design. The body and disc are made of stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of EPDM. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a multi-voltage electric actuator with a running time (90°): 34s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Stainless steel butterfly valve type AK202 operated by an electric actuator 24V - 230V - 240V AC/DC. The valve is suitable for installation between flanges according to DIN PN10/16 and ANSI/ASME Class 150. Wafer-type body and centric/concentric design. The body and disc are made of stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of EPDM. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a multi-voltage electric actuator with a running time (90°): 34s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Stainless steel butterfly valve type AK203 with threaded holes operated by an electric actuator 24 V - 230 V - 240 V AC/DC. The valve is suitable for installation between flanges according to DIN PN10/16. Lug-type body, concentric design. The body and disc are made of stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of EPDM. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by an electric multi-voltage actuator with a running time (90°): 9s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Stainless steel butterfly valve type AK203 with threaded holes operated by an electric actuator 24 V - 230 V - 240 V AC/DC. The valve is suitable for installation between flanges according to DIN PN10/16. Lug-type body, concentric design. The body and disc are made of stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of EPDM. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by an electric multi-voltage actuator with a running time (90°): 13s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Stainless steel butterfly valve type AK203 with threaded holes operated by an electric actuator 24 V - 230 V - 240 V AC/DC. The valve is suitable for installation between flanges according to DIN PN10/16. Lug-type body, concentric design. The body and disc are made of stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of EPDM. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by an electric multi-voltage actuator with a running time (90°): 13s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Stainless steel butterfly valve type AK203 with threaded holes operated by an electric actuator 24 V - 230 V - 240 V AC/DC. The valve is suitable for installation between flanges according to DIN PN10/16. Lug-type body, concentric design. The body and disc are made of stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of EPDM. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by an electric multi-voltage actuator with a running time (90°): 29s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Stainless steel butterfly valve type AK203 with threaded holes operated by an electric actuator 24 V - 230 V - 240 V AC/DC. The valve is suitable for installation between flanges according to DIN PN10/16. Lug-type body, concentric design. The body and disc are made of stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of EPDM. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by an electric multi-voltage actuator with a running time (90°): 34s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Stainless steel butterfly valve type AK203 with threaded holes operated by an electric actuator 24 V - 230 V - 240 V AC/DC. The valve is suitable for installation between flanges according to DIN PN10/16. Lug-type body, concentric design. The body and disc are made of stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of EPDM. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by an electric multi-voltage actuator with a running time (90°): 34s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Stainless steel butterfly valve type AK203 with threaded holes operated by an electric actuator 24 V - 230 V - 240 V AC/DC. The valve is suitable for installation between flanges according to DIN PN10. Lug-type body, concentric design. The body and disc are made of stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of EPDM. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by an electric multi-voltage actuator with a running time (90°): 58s ± 10%. The actuator can be upgraded to a digital positioner (0-10V or 4-20mA) or a battery safety pack (NC/NO) upon request.
Stainless steel butterfly valve type AK202 with manual operation for installation between flanges according to DIN PN10/16 and ANSI/ASME Class 150. Wafer type and centrally mounted. The housing and disc are made of high-quality stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of NBR. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a hand lever
Stainless steel butterfly valve type AK202 with manual operation for installation between flanges according to DIN PN10/16 and ANSI/ASME Class 150. Wafer type and centrally mounted. The housing and disc are made of high-quality stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of NBR. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a hand lever
Stainless steel butterfly valve type AK202 with manual operation for installation between flanges according to DIN PN10/16 and ANSI/ASME Class 150. Wafer type and centrally mounted. The housing and disc are made of high-quality stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of NBR. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a hand lever
Stainless steel butterfly valve type AK202 with manual operation for installation between flanges according to DIN PN10/16 and ANSI/ASME Class 150. Wafer type and centrally mounted. The housing and disc are made of high-quality stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of NBR. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a hand lever
Stainless steel butterfly valve type AK202 with manual operation for installation between flanges according to DIN PN10/16 and ANSI/ASME Class 150. Wafer type and centrally mounted. The housing and disc are made of high-quality stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of NBR. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a hand lever
Stainless steel butterfly valve type AK202 with manual operation for installation between flanges according to DIN PN10/16 and ANSI/ASME Class 150. Wafer type and centrally mounted. The housing and disc are made of high-quality stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of NBR. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a hand lever
Stainless steel butterfly valve type AK202 with manual operation for installation between flanges according to DIN PN10/16 and ANSI/ASME Class 150. Wafer type and centrally mounted. The housing and disc are made of high-quality stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of NBR. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a hand lever
Stainless steel butterfly valve type AK202 with manual operation for installation between flanges according to DIN PN10/16 and ANSI/ASME Class 150. Wafer type and centrally mounted. The housing and disc are made of high-quality stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of NBR. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a hand lever
Stainless steel butterfly valve type AK202 with manual operation for installation between flanges according to DIN PN10/16 and ANSI/ASME Class 150. Wafer type and centrally mounted. The housing and disc are made of high-quality stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of NBR. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a hand lever
Stainless steel butterfly valve type AK203 with manual operation for installation between flanges according to DIN PN10/16. Lug-type body, centric design. The housing and disc are made of high-quality stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of NBR. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a hand lever.
Stainless steel butterfly valve type AK203 with manual operation for installation between flanges according to DIN PN10/16. Lug-type body, centric design. The housing and disc are made of high-quality stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of NBR. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a hand lever.
Stainless steel butterfly valve type AK203 with manual operation for installation between flanges according to DIN PN10/16. Lug-type body, centric design. The housing and disc are made of high-quality stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of NBR. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a hand lever.
Stainless steel butterfly valve type AK203 with manual operation for installation between flanges according to DIN PN10/16. Lug-type body, centric design. The housing and disc are made of high-quality stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of NBR. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a hand lever.
Stainless steel butterfly valve type AK203 with manual operation for installation between flanges according to DIN PN10/16. Lug-type body, centric design. The housing and disc are made of high-quality stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of NBR. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a hand lever.
Stainless steel butterfly valve type AK203 with manual operation for installation between flanges according to DIN PN10/16. Lug-type body, centric design. The housing and disc are made of high-quality stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of NBR. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a hand lever.
Stainless steel butterfly valve type AK203 with manual operation for installation between flanges according to DIN PN10. Lug-type body, centric design. The housing and disc are made of high-quality stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of NBR. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a hand lever.
Stainless steel butterfly valve type AK203 with manual operation for installation between flanges according to DIN PN16. Lug-type body, centric design. The housing and disc are made of high-quality stainless steel (CF8M/1.4408), and the shaft is made of stainless steel (AISI 420). The seat ring is made of NBR. Ideal for installation in corrosive environments with liquid and gaseous media. Actuated by a hand lever.
Female threaded brass ball valve 1 1/4 inch electric actuator- connection acc. to ISO 7/1 F-F, body & ball made of brass CW617N, ball seal: PTFE + FKM, temperature range: -15°C to +90°C, 2-way - full bore - 2 parts, peaks up to +120°C for 1 hour only in open or closed position, Max. operating pressure: 25 bar, Approval: WRAS, Actuation: electric actuator (J4C S20), Running time(90°) 9s ± 10%, Multivoltage system 24V - 230V - 240V AC/DC
electric quarter turn ball valve 1/2 inch PN 63 female thread acc. to ISO 7-1(EN 10226-1) F-F, body / ball / shaft stainless steel (SS316)(CF8M), sealing ball PTFE + 15% glass fibre, with electric actuator(J4C S20), running time(90°) 9s ± 10%, multi voltage system 24V - 230V - 240V AC/DC
electric quarter turn ball valve 1/2 inch PN 63 female thread acc. to ISO 7-1(EN 10226-1) F-F, body / ball / shaft stainless steel (SS316)(CF8M), sealing ball PTFE + 15% glass fibre, with electric actuator(J4C S20), running time(90°) 9s ± 10%, multi voltage system 24V - 230V - 240V AC/DC
electric quarter turn ball valve 1/2 inch PN 63 female thread acc. to ISO 7-1(EN 10226-1) F-F, body / ball / shaft stainless steel (SS316)(CF8M), sealing ball PTFE + 15% glass fibre, with electric actuator(J4C S20), running time(90°) 9s ± 10%, multi voltage system 24V - 230V - 240V AC/DC
electric quarter turn ball valve 1/2 inch PN 63 female thread acc. to ISO 7-1(EN 10226-1) F-F, body / ball / shaft stainless steel (SS316)(CF8M), sealing ball PTFE + 15% glass fibre, with electric actuator(J4C S20), running time(90°) 9s ± 10%, multi voltage system 24V - 230V - 240V AC/DC
Brass ball valve electric 2 inchConnection to ISO 7/1 F-F, Body & ball made of brass CW617N, Ball seal: PTFE + FKM, Temperature range: -15°C to +90°C, 2-way - full bore - 2-piece, Peaks up to +120°C for 1 hour only in open or closed position, Max. Operating pressure: 25 bar, Approval: WRAS, Actuation: electric actuator (J4C S20), Running time(90°) 9s ± 10%, Multi-voltage system 24V - 230V - 240V AC/DC
Electric actuated ball valve 1/2 inch female thread Acc. to ISO 7-1 F-F, body / ball CW617N, sealing ball PTFE +FKM, max. pressure 25 bar, WRAS approved with electric actuator(J4C S20), running time(90°) 9s ± 10%, multi voltage system 24V - 230V - 240V AC/DC
Stainless steel ball valve 1/2" PN 63 female thread acc. to ISO 7-1(EN 10226-1) F-F, Body / ball / shaft made of stainless steel (SS316)(CF8M), Seal made of ball PTFE + 15% glass fibre, Full bore , 2 pieces Max. Operating pressure 63 bar with single-acting pneumatic actuator
